Nakajima B3N

Last updated
B3N
Role Torpedo bomber
National origin Japan
Manufacturer Nakajima Aircraft Company
First flight1933
StatusPrototype
Number built2

The Nakajima B3N was a prototype Japanese carrier-based torpedo-bomber aircraft of the 1930s. A single-engined biplane with a crew of three, it was unsuccessful, only two being built.

Contents

Development and design

In April 1932, the Imperial Japanese Navy placed orders with Mitsubishi and Nakajima for prototypes of three-seat torpedo-bombers to replace the relatively unsuccessful Mitsubishi B2M and the earlier Mitsubishi B1M aboard Japan's aircraft carriers. [1] Nakajima's design was a single-engined biplane with a slender circular section fuselage of steel tube construction. It had single-bay metal and fabric wings, with both the upper and lower wings gulled to meet the fuselage, with the upper wings gulled normally and the lower wings in an inverted gull arrangement, forming an X shape. It had a tailwheel undercarriage, with the main wheels attached to the lower wing where the gulled section joined the main wing. The new 700 hp (522 kW) Nakajima Hikari engine was chosen to power the aircraft, driving a three-bladed fixed-pitch metal propeller. [2]

Nakajima built two prototypes in 1933, with the internal designation Nakajima Y3B, as the Experimental 7-Shi Carrier Attack Aircraft, with the short designation B3N1 but the prototype Hikari engines proved unreliable, and the type was not accepted by the Navy. [2] Mitsubishi's competing 7-Shi design, the Rolls-Royce Buzzard powered 3MT10 was also a failure, the sole prototype crashing on take-off in 1934, [3] with the design from the Navy's own Air Technical Arsenal at Yokosuka, which was started later than the competing designs from Mitsubishi and Nakajima and therefore managed to avoid some of their flaws, being ordered into production as the Yokosuka B3Y. [4]

Specifications (B3N1)

Data fromJapanese Aircraft 1910-41 [2]

General characteristics

Performance

Armament

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Nakajima A4N</span> Japanese carrier-based fighter aircraft

The Nakajima A4N was a carrier-based fighter used by the Imperial Japanese Navy, and the last biplane designed by Nakajima. The first prototype was completed in 1934, but due to engine trouble the aircraft did not see service until 1936. Given the Nakajima internal designation Nakajima YM, the Japanese Navy designation was Navy Type 95 Carrier Fighter. A total of 221 were built.

<span class="mw-page-title-main">Aichi D1A</span> Japanese carrier-borne dive bomber

The Aichi D1A or Navy Type 94/96 Carrier Bomber was a Japanese carrier-based dive bomber of the 1930s. A single-engine, two-seat biplane based on the Heinkel He 50, the D1A was produced by Aichi for the Imperial Japanese Navy, remaining in service as a trainer at the time of the attack on Pearl Harbor. The D1A was produced in two variants, the D1A1, and the D1A2.

<span class="mw-page-title-main">Yokosuka B4Y</span> Japanese carrier-borne torpedo bomber

The Yokosuka B4Y was a carrier-borne torpedo bomber used by the Imperial Japanese Navy Air Service from 1936 to 1943. The B4Y replaced the Mitsubishi B2M2 and was the last biplane bomber used operationally by the Imperial Japanese Navy. The Allied reporting name was "Jean".

<span class="mw-page-title-main">Mitsubishi 2MR</span> Japanese reconnaissance aircraft

The Mitsubishi 2MR was a Japanese carrier-based reconnaissance aircraft of the 1920s, also known as the Navy Type 10 Carrier Reconnaissance Aircraft or the C1M in the Navy's short designation scheme. Designed for Mitsubishi by the British aircraft designer Herbert Smith, the 2MR was used by the Imperial Japanese Navy through the 1920s and 1930s.

<span class="mw-page-title-main">Kugisho B3Y</span> Japanese torpedo bomber

The Kugisho B3Y, or Navy Type 92 Carrier Attack Bomber, also popularly titled Yokosuka B3Y, was a Japanese carrier-based torpedo bomber of the 1930s. It was designed by the Naval Air Technical Arsenal at Yokosuka, and while unimpressive during testing, it was ordered into service by the Imperial Japanese Navy and used until replaced by more capable aircraft.

The Nakajima Ki-19 was an unsuccessful attempt by Nakajima Aircraft Company to meet a 1935 requirement issued by the Japanese government for a modern bomber to replace the Mitsubishi Ki-1 heavy bomber.

<span class="mw-page-title-main">Mitsubishi 2MR8</span> Type of aircraft

The Mitsubishi Army Type 92 Reconnaissance Aircraft (九二式偵察機) was a Japanese short-range reconnaissance aircraft of the 1930s designed by Mitsubishi for the Imperial Japanese Army Air Force. A total of 230 were built, serving between 1933 and 1936. A parasol monoplane, the Type 92 was the first military aircraft powered by an engine both designed and manufactured in Japan to enter service.

The Nakajima C3N-1 was a prototype Japanese carrier-based reconnaissance aircraft of the 1930s. A single-engine monoplane with a fixed undercarriage, although only two examples were built, they were both used operationally, carrying out land-based reconnaissance missions during the Second Sino-Japanese War.

<span class="mw-page-title-main">Yokosuka E1Y</span> Japanese reconnaissance floatplane

The Yokosuka E1Y was a Japanese floatplane of the 1920s. A single-engined biplane that was designed and developed by the Yokosuka Naval Air Technical Arsenal as a reconnaissance aircraft for the Imperial Japanese Navy, 320 were built as the Type 14 Reconnaissance Seaplane, entering service in 1925 and remained in operational service until 1932.

<span class="mw-page-title-main">Yokosuka Ro-go Ko-gata</span> Japanese reconnaissance floatplane

The Yokosuka Ro-go Ko-gata was a Japanese reconnaissance floatplane developed during the First World War by the Japanese Navy Arsenal at Yokosuka, and one of the first indigenous Japanese aircraft to enter production. There were 218 of these aircraft built for the Imperial Japanese Navy, which remained in use until 1928.

The Aichi F1A was a prototype Japanese floatplane of the 1930s. A single-engined biplane, the F1A was intended as a short-range observation aircraft suitable for operation off the Imperial Japanese navy's warships, but only two were built, the Mitsubishi F1M being selected instead.

<span class="mw-page-title-main">Mitsubishi 3MT5</span> Japanese bomber

The Mitsubishi 3MT5 was a Japanese bomber of the 1930s. It was a twin-engined biplane that was intended to operate from Japanese aircraft carriers, but proved to be unsuitable for carrier use, and the eleven aircraft built were instead used as land-based trainers.

The Kawanishi K-11 was a 1920s Japanese single-seat carrier fighter designed and built by the Kawanishi Aircraft Company to meet an Imperial Japanese Navy requirement. The type did not enter service and only two prototypes were built.

<span class="mw-page-title-main">Mitsubishi 1MF9</span> Japanese carrier-based fighter prototype

The Mitsubishi 1MF9 or Mitsubishi Experimental Taka-type Carrier Fighter was a prototype Japanese fighter aircraft of the 1920s. It was a single-engined, single-seat biplane intended to operate from the Imperial Japanese Navy's aircraft carriers, but only two were built, with the type being rejected by the Navy.

<span class="mw-page-title-main">Mitsubishi MC-1</span> Japanese airliner prototype

The Mitsubishi MC-1 was a 1920s Japanese single-engined biplane airliner designed and built by the Mitsubishi Aircraft Company.

<span class="mw-page-title-main">Mitsubishi 2MB2</span> Japanese light bomber prototype

The Mitsubishi 2MB2 or Experimental Washi-type Light Bomber was a prototype Japanese single-engined biplane light bomber of the 1920s. A single example was built for the Imperial Japanese Army, but no production followed.

<span class="mw-page-title-main">Mitsubishi 1MF10</span> Japanese carrier-based fighter prototype

The Mitsubishi 1MF10 or Mitsubishi Experimental 7-Shi Carrier Fighter (七試艦上戦闘機) was a prototype Japanese monoplane single-seat carrier-based fighter aircraft of the 1930s. Two were built for the Imperial Japanese Navy, but both were lost in crashes, with no production following.

The Mitsubishi Ka-8 or Mitsubishi Experimental 8-Shi Two-seat Fighter was a prototype Japanese two-seat carrier-based fighter aircraft of the 1930s. Two were built, but no production followed.

The Nakajima D3N was a Japanese carrier-based dive bomber of the 1930s. Three prototypes were built for the Imperial Japanese Navy, but no production followed, with the Aichi D3A being selected instead.

<span class="mw-page-title-main">Mitsubishi B4M</span> Japanese torpedo bomber

The Mitsubishi Ka-12 or B4M was a Japanese carrier-based torpedo bomber of 1934. Two prototypes were built by Mitsubishi for the Imperial Japanese Navy. A development of the company's 3MT10 of 1932, the design differed primarily in the use of a radial engine and metal wing, which made the whole aircraft significantly lighter and faster. However, the design could not realise its potential as the wing was inefficiently stiff and the B4M was not selected for production. The competing Yokosuka B4Y was chosen to serve on the Navy's aircraft carriers instead.

References

  1. Mikesh and Abe 1990, pp. 230–231.
  2. 1 2 3 Mikesh and Abe 1990, p.231.
  3. Mikesh and Abe 1990, p.170.
  4. Mikesh and Abe 1990, pp. 280–281.