Napier Dagger

Last updated

Dagger
Napier Dagger NASM.jpg
Napier Dagger at the National Air and Space Museum
Type Piston aero-engine
Manufacturer Napier & Son
First run1934
Major applications Handley Page Hereford
Hawker Hector

The Napier Dagger was a 24-cylinder H-pattern (or H-Block) air-cooled engine designed by Frank Halford and built by Napier before World War II. It was a development of the earlier Napier Rapier.

Contents

Design and development

The H-Block has a compact layout, as it essentially consists of two vertically opposed, flat-twelve inline engines lying side-by-side and driving side-by-side crankshafts. Another advantage is that since the cylinders are opposed, the motion in one is balanced by the opposite motion in the one on the opposite side, leading to very smooth running. The Dagger was remarkable for its fast rotation, running at up to 4,000 rpm but unlike the later Napier Sabre, it had conventional poppet valves.

Although considered a masterpiece of engine design by Frank Halford, there were problems with cooling, maintenance, manufacturing and weight, which were not solved during the Dagger's lifetime and went unresolved well into the lifetime of the Napier Sabre, its successor. The Dagger powered the Hawker Hector army co-operation aircraft and the Handley Page Hereford, a variant of the Hampden bomber. The operational usefulness of the Hector was restricted by engine cooling problems, which made it unsuitable for operations in the tropics and the Hereford was found to be unsuitable for combat, because its Dagger VIII engines were noisy and unreliable. The Dagger was also used in the experimental Martin-Baker MB 2 fighter.

Variants

Napier-Halford Dagger I

1934 – 650 hp.

Dagger II

1938 – 755 hp

Dagger IIIM

1938 – 725 hp

Dagger VIII

1938 – 1000 hp, intermediate altitude supercharger, initially known as E.108 [1]

Applications

Dagger powered Hawker Hector Hawker Hector.jpg
Dagger powered Hawker Hector

Some of these aircraft were test beds only.

Engines on display

A preserved Napier Dagger is on display at the Royal Air Force Museum London.

Specifications (Napier Dagger III MS)

Napier Dagger at the Royal Air Force Museum, London NapierDagger.JPG
Napier Dagger at the Royal Air Force Museum, London

Data fromLumsden [3]

General characteristics

Components

Performance

See also

Related development

Comparable engines

Related lists

Related Research Articles

<span class="mw-page-title-main">Rolls-Royce Merlin</span> Aircraft engine family by Rolls-Royce

The Rolls-Royce Merlin is a British liquid-cooled V-12 piston aero engine of 27-litres capacity. Rolls-Royce designed the engine and first ran it in 1933 as a private venture. Initially known as the PV-12, it was later called Merlin following the company convention of naming its four-stroke piston aero engines after birds of prey.

<span class="mw-page-title-main">Bristol Jupiter</span> British nine-cylinder radial engine family

The Bristol Jupiter was a British nine-cylinder single-row piston radial engine built by the Bristol Aeroplane Company. Originally designed late in World War I and known as the Cosmos Jupiter, a lengthy series of upgrades and developments turned it into one of the finest engines of its era.

<span class="mw-page-title-main">Bristol Pegasus</span>

The Bristol Pegasus is a British nine-cylinder, single-row, air-cooled radial aero engine. Designed by Roy Fedden of the Bristol Aeroplane Company, it was used to power both civil and military aircraft of the 1930s and 1940s. Developed from the earlier Mercury and Jupiter engines, later variants could produce 1,000 horsepower from its capacity of 1,750 cubic inches by use of a geared supercharger.

<span class="mw-page-title-main">Bristol Mercury</span> Aircraft engine

The Bristol Mercury is a British nine-cylinder, air-cooled, single-row, piston radial engine. Designed by Roy Fedden of the Bristol Aeroplane Company it was used to power both civil and military aircraft of the 1930s and 1940s. Developed from the earlier Jupiter engine, later variants could produce 800 horsepower (600 kW) from its capacity of 1,500 cubic inches by use of a geared supercharger.

<span class="mw-page-title-main">Napier Sabre</span> 1930s British aircraft piston engine

The Napier Sabre is a British H-24-cylinder, liquid-cooled, sleeve valve, piston aero engine, designed by Major Frank Halford and built by D. Napier & Son during World War II. The engine evolved to become one of the most powerful inline piston aircraft engines in the world, developing from 2,200 hp (1,600 kW) in its earlier versions to 3,500 hp (2,600 kW) in late-model prototypes.

<span class="mw-page-title-main">Bristol Taurus</span> 1930s British piston aircraft engine

The Taurus is a British 14-cylinder two-row radial aircraft engine, produced by the Bristol Engine Company starting in 1936. The Taurus was developed by adding cylinders to the existing single-row Aquila design and transforming it into a twin-row radial engine, creating a powerplant that produced just over 1,000 horsepower with very low weight.

<span class="mw-page-title-main">Napier Lion</span>

The Napier Lion is a 12-cylinder, petrol-fueled 'broad arrow' W12 configuration aircraft engine built by D. Napier & Son from 1917 until the 1930s. A number of advanced features made it the most powerful engine of its day and kept it in production long after other contemporary designs had been superseded. It is particularly well known for its use in a number of racing designs, for aircraft, boats and cars.

<span class="mw-page-title-main">Rolls-Royce Vulture</span> 1930s British piston aircraft engine

The Rolls-Royce Vulture was a British aero engine developed shortly before World War II that was designed and built by Rolls-Royce Limited. The Vulture used the unusual "X-24" configuration, whereby four cylinder blocks derived from the Rolls-Royce Peregrine were joined by a common crankshaft supported by a single crankcase. The engine was originally designed to produce around 1,750 horsepower (1,300 kW) but problems with the Vulture design meant that the engines were derated to around 1,450 to 1,550 hp in service by limiting the maximum rpm.

<span class="mw-page-title-main">Frank Halford</span> English aircraft engine designer

Major Frank Bernard Halford CBE FRAeS was an English aircraft engine designer. He is best known for the series of de Havilland Gipsy engines, widely used by light aircraft in the 1920s and 30s.

<span class="mw-page-title-main">Rolls-Royce Kestrel</span>

The Rolls-Royce Kestrel is a 21.25 litre V-12 aircraft engine from Rolls-Royce. It was their first cast-block engine, and used as the pattern for most of their future piston-engine designs. Used during the interwar period, it was fitted to a number of British fighters and bombers of the era, including the Hawker Fury and Hawker Hart family, and the Handley Page Heyford. The Kestrel engine was also sold to international air force customers, in this role it used to power prototypes of the German Messerschmitt Bf 109 and the Junkers Ju 87 "Stuka" dive-bomber, as the Junkers Jumo 210 engines were not ready to be fitted. Several examples of the Kestrel engine remain airworthy today.

<span class="mw-page-title-main">Rolls-Royce Eagle</span> 12-cylinder vee liquid cooled aircraft engine

The Rolls-Royce Eagle was the first aircraft engine to be developed by Rolls-Royce Limited. Introduced in 1915 to meet British military requirements during World War I, it was used to power the Handley Page Type O bombers and a number of other military aircraft.

<span class="mw-page-title-main">Rolls-Royce Eagle (1944)</span>

The Rolls-Royce Eagle Mk XXII is a British 24-cylinder, sleeve valve, H-block aero engine of 46 litre displacement. It was designed and built in the early-1940s by Rolls-Royce Limited and first ran in 1944. It was liquid-cooled, of flat H configuration with two crankshafts and was capable of 3,200 horsepower at 18 psi boost.

<span class="mw-page-title-main">Rolls-Royce Goshawk</span> 1930s British piston aircraft engine

The Rolls-Royce Goshawk was a development of the Rolls-Royce Kestrel that used evaporative or steam cooling. In line with Rolls-Royce convention of naming piston engines after birds of prey, it was named after the goshawk.

<span class="mw-page-title-main">Armstrong Siddeley Jaguar</span> 1920s British piston aircraft engine

The Armstrong Siddeley Jaguar is an aircraft engine developed by Armstrong Siddeley. The Jaguar was a petrol-fuelled air-cooled 14-cylinder two-row radial engine design. The Jaguar III was first used in 1923, followed in 1925 by the Jaguar IV and in 1927 by the Jaguar VI. In 1925 the Jaguar became the first production aero engine incorporating a geared supercharger.

<span class="mw-page-title-main">Armstrong Siddeley Panther</span> 1920s British piston aircraft engine

The Armstrong Siddeley Panther was a 27-litre 14-cylinder twin-row air-cooled radial aero engine developed by Armstrong Siddeley. It was originally named the Jaguar Major.

<span class="mw-page-title-main">Rolls-Royce Exe</span> 1930s British piston aircraft engine

The Rolls-Royce Exe, or Boreas, was a 24-cylinder air-cooled X block sleeve valve aircraft engine intended primarily for the new Fairey Fleet Air Arm aircraft, particularly the Fairey Barracuda. The Exe was relatively powerful for its era, producing about 1,100 hp (820 kW). This is notable given the relatively small 1,300 cubic inches (22 L) displacement, the Merlin requiring 1,600 cubic inches (27 L) for approximately the same power level. The X-24 layout made this quite a compact engine.

<span class="mw-page-title-main">Armstrong Siddeley Tiger</span> 1930s British piston aircraft engine

The Armstrong Siddeley Tiger was a British 14-cylinder air-cooled aircraft radial engine developed by Armstrong Siddeley in the 1930s from their Jaguar engine. The engine was built in a number of different versions but performance and dimensions stayed relatively unchanged. The Tiger VIII was the first British aircraft engine to use a two-speed supercharger.

<span class="mw-page-title-main">Napier Rapier</span> 1920s British piston aircraft engine

The Napier Rapier was a British 16-cylinder H pattern air-cooled aero engine designed by Frank Halford and built by Napier & Son shortly before World War II.

The Fairey P.16 Prince was a British experimental 1,500 hp 16-cylinder H-type aircraft engine designed and built by Fairey in the late 1930s. The engine did not go into production.

<span class="mw-page-title-main">Fairey Monarch</span> 1930s British aircraft engine

The Fairey P.24 Monarch was a British experimental 2,000 hp class H-24 aircraft engine designed and built by Fairey in the late 1930s. The engine did not go into production.

References

Notes

  1. Jane's all the world's aircraft 1942
  2. Moyes, Philip J.R. (1965). The Handley Page Hampden. Aircraft in Profile 58. Leatherhead, Surrey, UK: Profile Publications. p. 10.
  3. Lumsden 2003, p.174.

Bibliography