EMP | |
---|---|
Type | Submachine gun |
Place of origin | Germany |
Service history | |
In service | 1931–1958 |
Used by | See Users |
Wars | |
Production history | |
Designed | 1930 |
Manufacturer | Erma Werke |
Produced | 1931–1938 |
No. built | Approx.10,000 |
Specifications | |
Mass | 4 kg (8 lb 13 oz) |
Length | 95 cm (37 in) |
Barrel length | 32 cm (13 in) |
Cartridge | 9×19mm Parabellum, 7.63×25mm Mauser, 9×23mm Largo, 7.65×21mm Parabellum [1] |
Caliber | 9 mm |
Action | Blowback |
Rate of fire | 550 rpm |
Muzzle velocity | 380 m/s (1,200 ft/s) |
Effective firing range | 150 m (490 ft) |
Maximum firing range | 250 m (820 ft) |
Feed system | 32-round magazine |
Sights | Iron |
The German submachine gun EMP (Erma Maschinenpistole) also known as MPE (Maschinenpistole Erma) was produced by the Erma factory, and was based on designs acquired from Heinrich Vollmer. The gun was produced from 1931 to 1938 in roughly 10,000 exemplars (in three main variants) and exported to Spain, Mexico, China and Yugoslavia, but also used domestically by the SS. It was produced under license in Spain by the arsenal of A Coruña under the designation M41/44.
In the early 1920s, Vollmer started to develop his own sub-machineguns. His early models, named VPG, VPGa, VPF and VMP1925 were fairly similar to the MP18. The VMP1925 had a wooden handgrip and was fed by a 25-round drum magazine. The VMP1925 was secretly tested by the Reichswehr, along with competing designs from Schmeisser and Rheinmetall. (The Reichswehr was prohibited by the Versailles Treaty from having sub-machine guns in service, although the German police were allowed to carry a small number.) Secret funding was given to Vollmer to continue development, and this resulted in the VMP1926, which mostly differed from its predecessor by the removal of the cooling jacket. A subsequent development was the VMP1928, which introduced a 32-round box magazine sticking from the left side. The final development of this series was the VMP1930. (It can also be seen at the WTS.) This model introduced a substantive innovation—a telescoping main spring assembly, which made the gun more reliable and easier to assemble and disassemble in the field. Vollemer applied for a patent for his innovation in 1930 and it was granted in 1933 as DRP# 580620. His company, Vollmer Werke, produced however only about 400 of these, and most were sold to Bulgaria. In late 1930, the Reichswehr stopped supporting Vollmer financially; consequently he sold the rights to all his designs to the company known as Erma Werke (which is an abbreviation for Erfurter Maschinenfabrik, Berthold Geipel GmbH). [2]
The submachine guns that Erma started to sell in 1932 under the names EMP (Erma Maschinenpistole) or MPE (Maschinenpistole Erma) was basically just the VMP1930 with the cooling jacket restored. Although there were several variants with varying barrel lengths and sights made to customers' specifications, roughly three main variants were produced: one with a 30 cm barrel, tangent rear sight and bayonet lug was apparently sold to Bulgaria or Yugoslavia. The second model, sometimes called the MP34, or the "standard model", had a 25 cm barrel and no provision for a bayonet; the rear sight on these varies—some had a tangent sight, others a simplified flip-up "L" sight. A third variant was basically similar in the metallic parts, but replaced the foregrip with an MP18-style stock with finger-grooves. Overall, at least 10,000 of these Vollmer-based designs were made by Erma. [2] They were adopted by the SS and the German Police, but also sold to Mexico, Yugoslavia and Spain. [3] During the Spanish Civil War, the EMP was used by both the Republicans [4] and the Nationalists. [5]
In the spring of 1939, a large number of defeated Spanish Republicans fled to France, where they were disarmed. Some 3,250 EMPs formerly in the possession of these fighters ended up in a French warehouse at Clermont-Ferrand. The EMPs were usually referred to as the "Erma–Vollmer" in French documents. The French tested the weapons and decided to adopt them for their own service. A provisional manual was printed in French as Provisoire sur le pistolet-mitrailleur Erma – Vollmer de 9mm, issued on December 26, 1939 and updated on January 6, 1940. However, the French had obtained only some 1,540 suitable magazines for these guns, so only 700-800 EMPs were actually distributed to the French forces, mostly to the Mobile Gendarmerie. After the Germans conquered France, some EMPs armed the Legion of French Volunteers Against Bolshevism, which eventually became part of the SS Charlemagne division. This division was practically destroyed in February 1945 in Eastern Prussia, now part of Poland. Numerous EMPs have been found in the last-stand battlefields of the SS Charlemagne division; most of these guns lack any German military stamps or marks. [6] The EMPs which arrived in German hands via the French route were given the (Fremdgerät) designation 740(f). [7] The Yugoslav purchased EMPs were used by both the Partisans and the Chetniks. [8]
In Francoist Spain, the EMP, chambered in the 9mm Largo cartridge, was locally produced until the mid-1950s. It was designated Model 1941/44 [9] or "subfusil Coruña" but commonly known as Naranjero. [10] [11] It performed poorly during the Ifni War. [12]
Its arming lever is on the right. The magazine housing, which is on the left, is slightly canted forwards to assist in feeding ammunition. The weapon could be fired either in semi-automatic or fully automatic modes.
The final development at Erma is known as the EMP 36. This can be considered an intermediate model between the EMP and the MP38. Although many details of the mechanism were changed from the EMP, it retained Vollmer's telescoping main operating spring basically unchanged. On the exterior, the most obvious differences are that the magazine housing was now almost vertical, although still canted slightly to the left and forward. The solid wood stock was replaced with a wood frame and a folding metal butt. It is not entirely clear who designed the EMP 36, although Berthold Geipel himself is usually credited. Apparently, the features of the new design were the result of another secret contract with the German army. [2] The EMP's telescopic cylinder return spring guide was retained for the Maschinenpistole 38.
A submachine gun (SMG) is a magazine-fed automatic carbine designed to fire handgun cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun, to describe its design concept as an automatic firearm with notably less firepower than a machine gun. As a machine gun must fire rifle cartridges to be classified as such, submachine guns are not considered machine guns.
The Thompson submachine gun is a blowback-operated, selective-fire submachine gun, invented and developed by United States Army Brigadier General John T. Thompson in 1918. It was designed to break the stalemate of trench warfare of World War I, although early models did not arrive in time for actual combat.
The MP 40 is a submachine gun chambered for the 9×19mm Parabellum cartridge. It was developed in Nazi Germany and used extensively by the Axis powers during World War II.
The StG 44 is a German assault rifle developed during World War II by Hugo Schmeisser. It is also known by its early designations as the MP 43 and MP 44. The StG 44 was an improvement of an earlier design, the Maschinenkarabiner 42(H).
The Suomi KP/-31 is a Finnish submachine gun that was mainly used during World War II. It is a descendant of the M-22 prototype and the KP/-26 production model, which was revealed to the public in 1925. It entered service in Finland in 1931, and remained in use until the 1980s.
The ZK-383 is a submachine gun developed by the Koucký brothers, who worked at the pre-war Československá zbrojovka, akc.spol. arms factory in Brno, Czechoslovakia. It was produced at a slow rate from 1938 onwards and was exported as far away as Bolivia and Venezuela.
The 9×23mm Largo centerfire pistol cartridge was developed in 1901 for the Bergmann Mars pistol.
The MP 18 is a German submachine gun designed and manufactured by Bergmann Waffenfabrik. Introduced into service in 1918 by the German Army during World War I, the MP 18 was intended for use by the Sturmtruppen, assault groups specialized in trench combat, as a short-range offensive weapon that would provide individual soldiers with increased firepower over a pistol.
Hugo Schmeisser was a German developer of 20th century infantry weapons.
The MP35 was a submachine gun used by the Wehrmacht, Waffen-SS and German police both before and during World War II. It was developed in the early 1930s by Emil Bergmann and manufactured at the Bergmann company in Suhl.
The MP34 is a submachine gun (SMG) that was manufactured by Waffenfabrik Steyr as Steyr-Solothurn S1-100 and used by the Austrian Army and Austrian Gendarmerie and subsequently by units of the German Army and the Waffen SS, in World War II. An exceptionally well-made weapon, it was used by some forces well into the 1970s.
Heinrich Vollmer was a German small-arms designer.
The FN Model 1910 is a blowback-operated, semi-automatic pistol designed by John Browning and manufactured by Fabrique Nationale of Belgium.
The Erfurter Maschinenfabrik (ERMA) was a German weapons manufacturer founded in 1922 by Berthold Geipel. Prior to and during World War II it manufactured many firearms, including the Karabiner 98k, the MP40 and other submachine guns.
The MP 36 was a submachine gun designed in 1936 and produced by Nazi Germany during World War II. It was a select-fire 9×19mm Parabellum submachine gun with a wooden body and a steel folding stock.
The Maschinenkarabiner 36 is a prototype German 9mm submachine gun developed by Hugo Schmeisser.
C.G. Haenel is a German weapon manufacturer located in Suhl, Germany.