The Pistole Parabellum or Parabellum-Pistole (Pistol Parabellum), commonly known as just the Luger or Luger P08, [10] is a toggle-locked recoil-operated semi-automatic pistol. The Luger was produced in several models and by several nations from 1898 to 1949.
The design was first patented by Georg Luger. It was meant to be an improvement of the Borchardt C-93 pistol, and was initially produced as the Parabellum Automatic Pistol, Borchardt-Luger System by the German arms manufacturer Deutsche Waffen- und Munitionsfabriken (DWM). [1] The first production model was known as the Modell 1900 Parabellum. [1] It was followed by the "Marinepistole 1904" for the Imperial German Navy.
The Luger was officially adopted by the Swiss military in 1900, the Imperial German Navy in 1906 and the German Army in 1908. The Luger was the standard service pistol of Switzerland, Portugal, the Netherlands, Brazil, Bolivia, and Bulgaria. It was widely used in other countries as a military service pistol and by police forces. [11] In the German Army service, it was adopted in a slightly modified form as the ''Pistole Modell 1908 (Pistole 08) in caliber 9×19mm Parabellum. [1] The Model 08 was eventually succeeded by the Walther P38.
The Luger is well known for its wide use by Germany during World War I and World War II, along with the interwar Weimar Republic and the postwar East German Volkspolizei .
The name Parabellum, which also featured in DWM's telegraphic address, comes from the Latin phrase Si vis pacem, para bellum ; "If you wish for peace, prepare for war." [12] [13]
In 1897, after the success of the Borchardt C-93, as the first mass-produced semi-automatic pistol, [14] the Swiss military began to look for a semi-automatic pistol to replace their issued pistol, the Ordonnanzrevolver 1872. [15] Georg Luger, working for the German company Deutsche Waffen- und Munitionsfabriken, provided the Borchardt-Luger design, which during Swiss military trials, was found to be more accurate and reliable than competing designs such as the Mannlicher M1901 and Mauser C96. [15] 20 examples of the Borchardt-Luger were sent to Switzerland in 1899, and after a revision to reduce its weight, was adopted the following year as the Ordonnanzpistole 1900. [16] The Luger remained in Swiss service until 1949, when it was replaced by the SIG P210. [16]
In 1898, Germany adopted a total of 145 C96 pistols, but found that it jammed too often to be effective. [17] In 1901, testing of the Luger commenced, alongside an improved version of the C96, in which the Luger was found to be both lighter and more reliable. [17] Following a change in caliber from 7.65×21mm Parabellum to 9×19mm Parabellum, the Luger was adopted by the Imperial German Navy as the Selbstlade-Pistole Modell 1904, and later simply the Pistole 1904. [18] The Army delayed their adoption, as Mauser requested time to develop a new pistol of their own, which was finished in 1907. [19] However, the new pistol was still found to be less desirable than the Luger, and on 22 August 1908, Kaiser Wilhelm II signed an order for 50,000 Lugers for the German Army, with orders to produce a total of 170,000. [20]
In 1901, DWM sent two Lugers to the United States, who were also interested in a semi-automatic pistol. [21] After doing well in testing, a total of 1,000 pistols and 200,000 rounds were purchased for use by the Military Academy at West Point, and several other forts. The Luger was unpopular, with most troops preferring their .38 Long Colt revolvers, resulting in the Luger being recalled in 1905. [22]
In 1906, the United States evaluated several domestic and foreign-made semi-automatic pistols, including the Colt M1900, Steyr Mannlicher M1894, and an entry from Mauser. [23] This was in response to combat reports which stated that the .38 caliber revolvers used in the 1899–1902 Philippine Insurrection lacked stopping power. Due to the findings in the Thompson–LaGarde Tests, the military required a handgun in .45 (11.25mm) caliber.
In 1906 and 1907, the U.S. Army held trials for a large-caliber semi-automatic pistol. At least two, and possibly three, Parabellum Model 1902/1906 pattern pistols were brought to the U.S. by Georg Luger for the 1907 trials, each chambered in .45 ACP caliber. [1] Prior to his arrival, the U.S. Frankford Arsenal had provided Luger with 5,000 rounds of .45 ammunition for experimentation and to serve as a guide for chambering measurements. [1] Finding numerous defects in this prototype ammunition (U.S. authorities later were forced to produce new ammunition for the 1907 trials), Luger had DWM pull the bullets of these cartridges and had them re-loaded with a special faster-burning powder in new brass cases. [24] Luger brought 746 rounds of this new ammunition to the March 1907 trials with his .45 Luger pistol. [1] [24] Two test .45 Luger pistols, bearing serial numbers 1 and 2, are known to have been used in the 1907 tests. [24] Although the .45 Luger passed the firing tests, it was ranked below the Colt/Browning and Savage pistols in number of malfunctions and misfires, though Army officials conceded that the .45 Luger performed satisfactorily with the DWM-loaded ammunition: [24] "The Luger automatic pistol, although it possesses manifest advantages in many particulars, is not recommended for service tests because its certainty of action, even with Luger ammunition, it is not considered satisfactory, because of the final seating of the cartridge is not by positive spring action, and because the powder stated by Mr. Luger to be necessary, for its satisfactory use is not now obtainable in this country." [25] DWM and Luger later rejected an invitation by Army officials to produce 200 pistols in .45 caliber for further competition against the Colt and Savage submissions, at which point DWM effectively withdrew from the U.S. trials. [1] [24]
The fate of the .45 Luger, serial number 1 is unknown, as it was not returned and is believed to have been destroyed during testing. The .45 Luger prototype serial number 2, believed to have been a back-up to Serial Number 1, survived the 1907 trials and is in private ownership. Its rarity gives its value of around US$1 million at the time the "Million Dollar Guns" episode of the History Channel's Tales of the Gun was filmed, [26] recheck by Guns & Ammo as of 1994. [27] At least two .45 caliber Luger pistols were manufactured later for possible commercial or military sales; one is exhibited at the R. W. Norton Art Gallery, in Shreveport, Louisiana. The other was sold in 2010 and remains in a private collection. A single .45 Luger carbine is also known to exist. [28]
The first known instance of the Luger being used in combat was during the Maji Maji Rebellion in 1905-1907. [29] Therein, it was somewhat poorly received, as it was thought to be too heavy to be used quickly, in particular because the grip safety had to be held tightly, reducing accuracy, leading to the removal of the safety in the P08 model. [29]
At the beginning of World War I, not all units of the German Army had been equipped with the Luger, leading to an acceleration in production. [30] Alongside the P08, Germany also developed the LP08, a version with a stock and longer barrel that could also accept drum magazines. [31] The LP08 was used by the Luftstreitkräfte during the early days of the war, before planes were equipped with machine guns, although due to a lack of pre-war production, the LP08 was much less commonly used than the P08. [30] The main user of the LP08 was the Army, who used its drum magazine to deliver a high rate of fire at a close range, a concept which would lead to the development of the Stormtroopers and the MP 18. [31] After the end of the war, Germany signed the Treaty of Versailles, which restricted the size of their army – the treaty specified that the German Army could only have 50,000 pistols, and prohibited submachine guns and pistols with stocks altogether. [32]
As the Luger was expensive to produce, Germany started to look for a replacement as early as 1927, settling on the Walther P38 in 1938, which offered similar performance to the Luger, but took almost half the time to produce. [33] Moving the production lines to the P38 once World War II started took longer than expected, leading to the P08 remaining in production until September 1942, and pre-existing copies remained in service until the end of the war. [34] In East Germany, the P08 was used by the Volkspolizei, mostly from ex-Nazi stocks, but they produced a small number up until 1953. [35]
The Luger has a toggle-lock action that uses a jointed arm to lock, as opposed to the slide actions of many other semi-automatic pistols, such as the M1911. After a round is fired, the barrel and toggle assembly travel roughly 13 mm (0.5 in) rearward due to recoil, both locked together at this point. The toggle strikes a cam built into the frame, causing the knee joint to hinge and the toggle and breech assembly to unlock. The barrel strikes the frame and stops its rearward movement, but the toggle assembly continues moving, bending the knee joint upwards, extracting the spent casing from the chamber, and ejecting it. The toggle and breech assembly then travel forward under spring tension and the next round is loaded from the magazine into the chamber. The entire sequence occurs in a fraction of a second and contributes to the above average mud resistance [36] of the pistol.
This mechanism works well for higher-pressure cartridges, but cartridges loaded to a lower pressure can cause the pistol to malfunction because they do not generate enough recoil to work the action fully. This results in the breech block either not clearing the top cartridge of the magazine or becoming jammed open on the cartridge's base. [37] This malfunction with under-powered cartridges does occur with Browning-type and other pistol designs as well, but the Luger is sensitive to cartridges other than the brass-cased ammunition that it was designed to use. [38]
Submachine guns were found to be effective in trench warfare during World War I, and experiments were conducted to convert various types of pistols to fully automatic machine pistols, including the P08. The Luger proved to have an excessive rate of fire in full-automatic mode, however, as did the Mauser C96. The 'snail drum' magazine for the MP 18, which was used by German Stormtroopers towards the end of the war, was originally designed for the Artillery Luger. [39]
Luger pistols were manufactured in Germany and Switzerland to very close tolerances and exacting standards using the highest quality materials of the day, and original pistols were known for having a long service life. [40] The design requires hand fitting of certain parts for proper operation. Assembling the gun using a sideplate from another pistol, for example, may prevent the sear from working, making the pistol inoperable. The Luger barrel, which was rigidly fixed to the barrel extension and carried the front sight, provided excellent accuracy. [40] William B. "Bill" Ruger praised the Luger's 145° (55° for Americans) grip angle and duplicated it in his .22 LR pistol. [40] Handgun author and enthusiast Elmer Keith observed that the Luger design had been unfairly criticized by gun writers over the years as unreliable, partly due to poor experiences with Lugers constructed from salvaged parts. [40] Keith noted that the Luger was a "natural pointer", one of the most accurate of all autoloading pistols—particularly at long ranges—and reminded critics that the Luger was the choice of more nations as their military sidearm than any other contemporary pistol or revolver. [40]
From 1919 onwards, DWM rebuilt P08 frames with new parts or existing parts (including barrels) into complete pistols for sale to the civilian and export markets. These sales helped restore DWM to solvency after the Armistice. [41] Most of these commercial pistols were in 7.65 Parabellum (.30 Luger) caliber, although a number of pistols were also re-barrelled to 9mm Parabellum (9×19mm). The new component parts were stamped with serial numbers to match the frame to ensure that all the fitted parts stayed together. Many thousands of these pistols were thought to have been assembled and sold between 1919 and 1923. Some of these pistols were fitted with new barrels of different lengths by the importer upon customer request. Many so-called 1919 and 1920 Commercial Lugers were imported to the United States by such firms as Abercrombie & Fitch, Pacific Arms Co., and A.F. Stoeger Inc. The latter importer sought and registered the name Luger in 1929, in the United States. [42]
In 1923, A.F. Stoeger Inc., the predecessor to Stoeger, Inc. began importing commercial pistols from DWM stamped A.F.Stoeger Inc. – New York. and "Germany". These pistols were exported to the United States in both 7.65 Parabellum (.30 Luger) and 9mm calibers, with barrel lengths from 75 mm to 600 mm. These imported Parabellums were also the first pistols to bear the name "Luger", roll stamped on the right side of the receiver. That same year, DWM also signed contracts to supply small numbers of P08 pistols to the armed forces of Finland (8,000 pistols, designated m/23), [43] the Netherlands, and Sweden.
Until 1930, DWM continued to export both P08 and commercial Parabellum pistols to nations in Europe and to overseas markets, including the United States and the Far East. Although never officially adopted by Nationalist forces, all variants of the Parabellum or Luger pistol were highly sought after by both Chinese Nationalist officers and irregular guerrilla forces. In 1924, just before the outbreak of the Chinese Civil War, a review of Chinese Nationalist small arms reported that "Among officers, bodyguards, and police, the German Parabellum (Luger) 9-mm automatic pistol was the weapon of choice...". [44]
In 1930, Mauser took over the manufacture of P.08 from DWM. [10] Additional P08s were produced by Simson and later Krieghoff. Many P04 and P08 pistols would continue in service with German army and navy personnel throughout World War II. Towards the end of 1937 (beginning with 't' & 'u' block pistols), Mauser phased out the rust blue process and "straw finishing" small parts and levers on the P08, choosing to salt blue all parts of the weapon at one time. In 1941, some of these pistols were fitted with inexpensive black Bakelite grip panels to cut production time and expense. Years after the war, these pistols would be given the name "Black Widow" by a postwar US arms dealer as a marketing ploy.
The P08 was technically replaced in service in 1938 by the Walther P38, but ever-growing wartime demands for handguns resulted in continued P08 production by Mauser until December 1943. [10] [45] Mauser production was supplemented by a small contract for Luger pistols given to Heinrich Krieghoff & Son of Suhl in 1935 to produce a Luger variant for the Luftwaffe; a second contract for 15,000 pistols was only partially completed when Krieghoff ceased Luger production in 1944. [45] The German Army took their last delivery of 1,000 Mauser-made pistols in November 1943. [45] A further 4,000 pistols assembled by Mauser in December of that same year were sold to Portugal, which renamed them the Model 943. [45] German military authorities refused to take any more Luger pistols, leaving a large stock of parts at the factory in Oberndorf. [45]
Captured Lugers were much prized by Allied soldiers during both of the world wars as war trophies. [46] However, during World War II, German soldiers were known to sometimes use a discarded Luger pistol to lure unsuspecting trophy hunters, rigging it to detonate land mines or hidden booby traps when disturbed. [47] Word also spread of accidental discharges and deaths of Allied troops by users unfamiliar with the P08 and its safety mechanisms, as well as stories circulating that American soldiers were being executed if captured in possession of German weapons. [42] [48]
Soviet forces captured tens of thousands of Lugers but they were never issued to their own troops, only kept in storage. [35]
Although Mauser P08 production terminated in 1943, the P08 re-appeared in postwar form because of the continuing demand for handguns for military and police requirements. In 1945, Mauser restarted Luger production under the control of the French occupation authority to supply the French military and occupation police forces. Assembly commenced under French control from June 1945 until mid-1946. In the second half of 1946, tooling and some Mauser personnel moved from Oberndorf to Châtellerault in France, the location of MAC (Manufacture d'Armes de Châtellerault) to continue assembly from existing parts stocks. About 4,000 Luger 'parts' pistols, including a few LP 08 models, are thought to have been assembled for French forces, a sufficient number to justify the production of new-manufacture Luger magazines in France for several years. [49] [45] Surviving examples of Lugers assembled under French supervision are sometimes found with a distinct, gray parkerized finish. [50] A few early French control pistols bear a five-pointed star proof mark known to have been used by French Occupation authorities. Later pistols assembled in France often carry a French arsenal/manufacturer name, such as Manufacture Française d'Armes & Cycles de St. Etienne (Manufrance).[ citation needed ] Surviving French Control Lugers were retained in French storage depots of the paramilitary National Gendarmerie as late as 1970. [50]
Pistols were also assembled under the direction of Soviet (and later, East German) authorities to arm military and MP units, as well as the Volkspolizei. [45] During the immediate postwar period, complete Luger pistols were also assembled from rejected or salvaged parts with different serial numbers, then sold as souvenirs to occupation forces in Germany. Thousands of original Luger pistols were taken home by returning Allied soldiers after both world wars. Other Luger pistols were later assembled in the United States by gunsmiths of varying aptitude using secondhand, rejected, or salvaged parts imported from Germany and other countries. These pistols and their construction quality (or lack of it) would contribute to criticism of the Luger as a finicky and unreliable weapon. However, a well-maintained Luger with new springs and suitable cartridges is a very reliable weapon. [51]
The Swiss Parabellum 06/29 continued in production until 1946. In 1969, after purchasing the Swiss 06/29 tooling, Mauser Werke in Oberndorf restarted Parabellum production, which ceased in 1986 when the last commemorative model was produced. [52] While new Mauser Luger production ended at this time, pistols continued to be assembled and sold from parts on hand until the 1990s.
Aaron Davis, writing in The Standard Catalog of the Luger, claimed that "From its adoption, the Luger was synonymous with the German military through the end of World War II" and "Ask any World War II vet of the [European Theater of Operations] what the most prized war souvenir was and the answer will invariably come back, 'a Luger'." [53] Colonel David Hackworth mentioned in his autobiography that it was still a sought-after sidearm in the Vietnam War. [54] Vietnamese gunsmiths even copied the basic Luger design, producing a few crude "Luger" pistols with which to arm Viet Cong and other irregular forces. [55]
A number of countries purchased the Model 1900 Parabellum in 7.65×21mm Parabellum (.30 Luger) caliber and issued the pistol on a limited basis to officers, non-commissioned officers and mounted troops, including Germany, Switzerland, and the United States. [1] The Model 1900 or Pistole Modell 1900 was issued to German officers and likely first saw combat in China during intervention by German troops in the aftermath of the Boxer Rebellion of 1900. [49] [56] On April 16, 1901, following a successful preliminary test of the Model 1900 at the Springfield Armory, [57] [58] the U.S. Board of Ordnance purchased 1,000 Model 1900 Parabellum pistols with 4.75-inch barrels, marked with what appear to be standard U.S. ordnance bomb proofs, but are not, [59] and "American Eagle" stamps over the chambers, and issued them to each troop of mounted cavalry of the U.S. Army for field testing, with the remainder to the light artillery and officers at West Point. [1] [58] In 1902, U.S. Army officials purchased another 50 Model 1902 Parabellum pistols with 4-inch barrels, again in 7.65mm Parabellum, for further testing and evaluation. This was followed by a third test of 50 so-called "cartridge counter" Parabellum pistols in 9×19mm by Springfield Armory in 1904. Other nations either tested the Model 1900 or purchased small numbers for limited field service, including Austria, Brazil, Bulgaria, Canada, Chile, the Netherlands, Luxembourg, Russia, Norway, Sweden, and Portugal. [1]
Commercial models of the Model 1900 were exported in quantity as well. In the U.S., Model 1900 pistols in 7.65 Parabellum caliber (aka .30 Luger in the U.S.) were first imported by Georg Luger, then by a DWM sales agent, Hans Tauscher, until World War I. [42] Referred to at the time as the 'Borchardt-Luger' by U.S. authorities, Tauscher consistently referred to the pistol in his marketing and advertising materials as the 'Luger', after its inventor. Model 1900 pistols shipped to the U.S. were typically stamped with an American Eagle atop the barrel extensions. [42] 'American Eagle' 7.65 Model 1900 pistols were used by a variety of buyers, including American lawmen such as Stringer Fenton, outlaws, and Texas Rangers. [60] [61] [62] [63]
After testing, the Swiss Army adopted the Model 1900 on April 4, 1901, in 7.65×21mm caliber as its standard sidearm, designated Pistole 1900. [23] This model uses a 120 mm (4.7 in) barrel and incorporates a grip safety and leaf-type mainspring. A later Swiss military contract with DWM resulted in the latter supplying improved Model 1900/06 pattern pistols designated the Model 1906 or Pistole 1900/06. Commencing in 1918, these Model 1906 Parabellum pistols were manufactured and assembled at Waffenfabrik Bern, Switzerland.
In 1929, Swiss authorities adopted an improved version of the Modell 1900 designated the Modell 06/29 with improved sights, trigger and a stronger toggle link. Manufactured entirely at Waffenfabrik Bern, the 06/29 pistol served the Swiss Army until well after the adoption of the SIG Sauer P210 in 1949, and remained in limited service until the late 1960s.
In 1902, DWM introduced a slightly improved version of the Model 1900 Parabellum as the Model 1902. The Model 1902, with its shortened 4-inch barrel, was the first Parabellum pistol to be offered in 9×19mm Parabellum caliber, along with a change from four-groove to six-groove rifling. [45]
The Luger pistol was accepted by the Imperial German Navy in 1904 in 9mm Parabellum as the Pistole 04 (P04). The navy model had a 150 mm (5.9 in) barrel and a two-position – 100 meters (110 yd) or 200 meters (220 yd) – rear sight. This version was also referred to as the "Marine Modell 1904" or, more colloquially in the US as the "navy Luger". [23] The Pistole 04 was later updated with a coil mainspring to Model 1906 pattern as Luger continued to refine and improve his design.
Georg Luger introduced a new version of the Parabellum pistol in 1906, which would become known as the Model 1906 or New Model (Neues Modell). This version of the Parabellum replaced the old flat laminated main spring with a more reliable coil design. [1] As all models of the Luger built after 1906 have the coil mainspring, they are known as New Models. [1] Older Parabellum pistols in German service were usually upgraded to the New Model specification.
In 1908, the German Army adopted the DWM Parabellum pistol as the Pistole Modell 1908 (P08) Parabellum to replace the Reichsrevolver in front-line service. [53] The Pistole 08 (or P.08) had a 100 mm (3.9 in) barrel and was chambered in 9×19mm Parabellum. This version of Georg Luger's design reflected a number of improvements requested by German military authorities. The grip safety used on earlier versions was omitted, while a lug was attached to the heel of the pistol frame for attachment of a shoulder stock. The barrel was reduced in length to 4 inches (102mm), and the caliber was 9×19mm Parabellum, and the 9×19mm DWM cartridge (Catalog No. 278F) initially adopted by the German Army featured a 123-grain truncated-nose bullet design intended to increase wounding effect of the fully jacketed bullet. [64] With slight modifications, notably the addition of a stock mounting lug and a hold-open latch, the P08 would serve as the German Army's principal sidearm during World War I, augmented by Mauser C96 and Model 1914 pistols. Over 2 million Luger pistols were used by German forces from 1914 to 1918. [45]
The Bolivian Army also adopted the DWM Luger in 9×19mm Parabellum as an officer's sidearm; 500 were bought in 1913. They bore the legend "Ejercito Boliviano" stamped on the chamber. [65]
The adoption of the Lange Pistole 08 or LP 08, known as the "Artillery Luger", was authorised by the Kaiser on 2 July 1913. This P08 variation was equipped with a 200 mm (7.9 in) barrel, an 8-position tangent rear sight (calibrated to 800 meters (870 yd)) and a board-type shoulder stock with an attached leather holster. In the event of close combat, the pistol was intended to be used as a carbine with the shoulder stock attached to a lug mounted on the heel of the pistol frame. When set for long range use the rear sight element visibly moves to the left to compensate for spin drift. While initially intended for use by German artillery units who could not be encumbered by the long and heavy K.98 rifle, the LP 08 was also used by Aviation units (prior to equipping aircraft with machine guns) as well as the infantry, primarily on the Western front during World War I. Stoßtruppen (stormtrooper infantry) units frequently employed the Artillery Luger equipped with a new large magazine, the 32-round Trommelmagazin or 'snail' magazine. Production of the LP 08 ended in 1918 with the end of the war. By that time, German troops had begun using the newly developed MP 18 submachine gun in place of the LP 08 for their stormtrooper assault companies. However, by this time enough LP 08 barrels had been manufactured and stockpiled to fill LP 08 export orders into the 1930s.
Carbine versions of the LP 08 were also produced commercially, with yet longer barrels. The firm Armeria Belga of Santiago (Chile) also manufactured a detachable stock, the Benke Thiemann stock, that could fold out from the grip section.
In the early 1920s, carbine production was restarted. Under a small contract, LP 08 or Artillery P08s were assembled in the 1930s to fill an order from the Shah of Iran for his artillery troops, with some of these weapons ending up with Thai police forces. Existing LP 08 pistols that had remained in storage were re-issued in World War II with new-production board stocks for some German units such as artillerymen and Waffen-SS units, and these continued in use until the end of the war in 1945.
The Luger rifle was an attempt by Georg Luger to make a full-powered semi-automatic rifle using the same toggle-bolt action of the pistol. A single rifle, serial number 4, exists in a private collection. The Luger rifle was protected under British patent No. 4126 of 1906. It was chambered in 7.92x57mm Mauser. [66]
In 1916, Heinrich Senn of Bern designed and patented a modification of the standard Swiss Luger pistol to fire in single shots or in full-automatic. This was achieved through the implementation of a sloped trigger sear which allowed the breech block to pass over it uninterrupted when the trigger was held down. When the trigger was released, the sear would rise and catch the breech block. This system was tested by the Swiss Army during World War I. Georg Luger himself apparently demonstrated a similar Luger machine-pistol around the same time, which inspired the German Army to introduce a submachine gun into service. The Senn machine-pistol was, however, not successful and it was never adopted by any military. [67]
A machine pistol is a handgun that is capable of fully automatic fire, including stockless handgun-style submachine guns.
The Colt M1911 is a single-action, recoil-operated, semi-automatic pistol chambered for the .45 ACP cartridge. The pistol's formal U.S. military designation as of 1940 was Automatic Pistol, Caliber .45, M1911 for the original model adopted in March 1911, and Automatic Pistol, Caliber .45, M1911A1 for the improved M1911A1 model which entered service in 1926. The designation changed to Pistol, Caliber .45, Automatic, M1911A1 in the Vietnam War era.
Mauser, originally the Königlich Württembergische Gewehrfabrik, was a German arms manufacturer. Their line of bolt-action rifles and semi-automatic pistols was produced beginning in the 1870s for the German armed forces. In the late 19th and early 20th centuries, Mauser designs were also exported and licensed to many countries, which adopted them as military and civilian sporting firearms. The Gewehr 98 in particular was widely adopted and copied, becoming one of the most copied firearms designs and it is the foundation of many of today's sporting bolt-action rifles. Around 10 millions Gewehr 98 style rifles were produced.
The Mauser C96 is a semi-automatic pistol that was originally produced by German arms manufacturer Mauser from 1896 to 1937. Unlicensed copies of the gun were also manufactured in Spain and China in the first half of the 20th century.
A semi-automatic pistol is a handgun that automatically ejects and loads cartridges in its chamber after every shot fired. Only one round of ammunition is fired each time the trigger is pulled, as the pistol's fire control group disconnects the trigger mechanism from the firing pin/striker until the trigger has been released and reset.
The 9×19mm Parabellum is a rimless, centerfire, tapered firearms cartridge.
The Walther P38 is a 9 mm semi-automatic pistol that was developed by Carl Walther GmbH as the service pistol of the Wehrmacht at the beginning of World War II. It was intended to replace the comparatively complex and expensive to produce Luger P08. Moving the production lines to the more easily mass producible P38 once World War II started took longer than expected, leading to the P08 remaining in production until September 1942 and copies remained in service until the end of the war.
Deutsche Waffen- und Munitionsfabriken Aktiengesellschaft, known as DWM, was an arms company in Imperial Germany created in 1896 when Ludwig Loewe & Company united its weapons and ammunition production facilities within one company. In 1896 Loewe founded Deutsche Waffen- und Munitionsfabriken with a munitions plant in Karlsruhe (Baden), formerly Deutsche Metallpatronenfabrik Lorenz, and the weapons plant in Berlin. Shares that Loewe had in other gun- and ammunition plants were transferred to DWM. This included Waffenfabrik Mauser, Fabrique Nationale d'Armes de Guerre (FN) in Belgium and Waffen- und Munitionsfabrik A.G. in Budapest. The DWM was orchestrated by Isidor Loewe (1848–1910), as his brother Ludwig had died in 1886. Karl Maybach was employed by the Loewe company in 1901.
Georg Johann Luger was an Austrian designer of the famous Luger pistol and the 9×19mm Parabellum cartridge.
The Colt Model 1900 is a short-recoil operated "self-loading", or semi-automatic .38 caliber handgun introduced by Colt's Manufacturing Company at the turn of the 20th century. The M1900 was the first firearm to be chambered in .38 ACP and was the first handgun to utilize short-recoil operation.
The Borchardt C93 is a semi-automatic pistol designed by Hugo Borchardt in 1893.
A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long barreled gun which typically is intended to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols.
The 7.65×25mm Borchardt cartridge was designed by Georg Johann Luger for use in Hugo Borchardt's Borchardt C-93 pistol. It was the first successful rimless pistol cartridge.
The 9×25mm Mauser is a cartridge developed for the Mauser C96 service pistol around 1904 by DWM. Mauser pistols in this relatively powerful caliber were primarily intended for export to Africa, Asia, and South America. The 9mm Mauser Export cartridge was produced specifically for Mauser pistols and carbines made from 1904 to 1914 and then later from approximately 1930 to 1945 for submachine guns chambered for this caliber.
The Bergmann 1894/1896/1897 was a family of 19th-century semi-automatic pistols developed by German designer Louis Schmeisser and sold by Theodor Bergmann's company.
The Roth–Steyr M1907, or, more accurately Roth-Krnka M.7 was a semi-automatic pistol issued to the Austro-Hungarian kaiserliche und königliche Armee cavalry during World War I. It was the first adoption of a semi-automatic service pistol by the army of a major military power.
The 7.63×25mm Mauser round is a bottleneck, rimless, centerfire cartridge, originally developed for the Mauser C96 service pistol. This cartridge headspaces on the shoulder of the case. It later served as the basis for the 7.62mm Tokarev cartridge commonly used in Soviet and Eastern Bloc weapons.
The 7.65×21mm Parabellum is a pistol cartridge that was introduced in 1898 by German arms manufacturer Deutsche Waffen- und Munitionsfabriken (DWM) for their new Pistol Parabellum. The primary developers of the pistol cartridge were firearms designers Georg Luger and Hugo Borchardt, who developed the round from the earlier 7.65×25mm Borchardt while working at DWM.
The Modelo 1905 is a pistol designed by Ferdinand Ritter von Mannlicher in 1899 and originally produced in Austria as the Mannlicher Model 1901. The Mannlicher Model 1901 was an improved version of the Model 1900, both of which were produced by Österreichische Waffenfabriks-Gesellschaft. All of these models have the same basic design and operation, but minimal adjustments were made to improve each of them. The Modelo 1905 is the version of the Model 1901 that the Argentine Army purchased from Steyr in 1905. This semi-automatic pistol has a unique and elegant appearance due to the curve of the handgrip. It is single action and uses a blowback operation system to reload. Like its predecessors, the Modelo 1905 has a non-detachable magazine that can be loaded from the top with a stripper clip.
{{cite web}}
: CS1 maint: numeric names: authors list (link)