Mannlicher M1901

Last updated

Mannlicher M1901
1901AustrianMannlicher1a.jpg
Type Semi-Automatic Pistol
Place of origin Austria-Hungary
Service history
Used bySee Users
Wars World War I
Production history
Designer Ferdinand Mannlicher
Manufacturer Œ.W.G.
Produced1901–1903
No. built4,000
Variants Mannlicher M1905
Specifications
Cartridge 7.63mm Mannlicher
Action Delayed blowback
Muzzle velocity 1070 ft/s (326 m/s)
Feed system8 round stripper clip into magazine
Sights Iron sights

The M1901 Mannlicher Self-Loading, Semi-Automatic Pistol was an early semi-automatic pistol design. [1] The Bundeswehr Museum of German Defense Technology in Koblenz has one of these specimen in its collection.

Contents

General features

This pistol is one of the most simple of blow-back semi-automatic pistols ever designed. The lockwork is essentially that of an elementary single action revolver. While technically listed as a 'hesitation' lock because of a delaying cam which has some theoretical tendency to slow down the opening of the breech, in actual practice it functions as an unlocked pistol.[ clarification needed ] [1]

According to the Steyr factory records this arm, patented in 1898, was originally introduced as the "Model 1900" and used a special 8 mm cartridge.

When introduced commercially in 1901 it was chambered for a special straight-case cartridge listed in Austria as "7.63 mm Mannlicher", designated in Germany as "7.65mm Mannlicher" (Note: There is also another 7.65 mm Mannlincher cartridge, M.1903, similar to 7.65 mm Borchardt), and described in the U.S. as "7.65 x 21 mm". The Mannlicher "straight sided" cartridge actually has a straight taper to help in extraction.

The cartridge for this pistol was manufactured in Europe until the beginning of WWII. The cartridge has a bullet weighing approx. 85 grains (5.5 g) which may be steel or cupro-nickel jacketed. The powder charge varies with the type of powder used, the European standard being about 3.5 grains (227 mg) of DWM standard powder, producing a muzzle velocity in the neighborhood of 1070 ft/s (326 m/s).

While this is a cartridge of considerable power to use in a blow-back action, the pistol design itself is so sturdy that it tends to be very reliable through the years.

The firing chamber in this design is part of the receiver proper. The fixed magazine is housed in the grip, and is loaded with a stripper clip through the top of the open action. Because of the extremely simple lock work employed, the pistol has a minimum bulk for an arm of its type. [1]

1901MannlicherBreech.jpg

Breechblock design

The moving breechblock of this pistol was designed as a slide with two rails extending forward beneath the stationary receiver/barrel where they are connected by a cross beam which is also part of the single breechblock forging. The barrel is screwed into the chamber section of the receiver and has a front sight top rib which is part of the barrel forging.

A spiral recoil spring is positioned horizontally, directly below the barrel between the parallel guides of the receiver and rails of the breechblock. An illustration of this spring is shown in the drawing from page 216, Mannlicher Rifles and Pistols, Smith, 1947. When the pistol is discharged, as the breechblock moves to the rear and the slide rails travel back in the receiver guides, the cross-beam at the forward end serves to compress the recoil spring against the frame.

1901AustrianMannlicher2.jpg

The lockwork is incorporated on the left side of the frame where it is covered by a removable side cover housing of unusual design, being wrapped around at the forward end and serving also as a cover of the recoil spring. An illustration of this cover is shown in the below drawing from page 218 of the same work. [2] This cover is installed on the frame from the front, and is retained by a spring catch forward of the trigger-guard.

The trigger is connected on the left side of the frame to a trigger bar, which, as the trigger is pulled, moves rearward, pushing against the sear tail, which is under the control of the V-spring that serves as both trigger spring and sear spring. The sear nose engages in a notch in the left fork of the hammer (which is external) to provide a smooth trigger pull that is very unusual in an automatic pistol.

Mounted on the frame under the right portion of the side cover housing is the mainspring, a heavy V-spring. Its greater arm (lower) engages a notch in the right fork of the hammer to drive it forward when released by the sear. Its lesser arm (upper) continuously presses a cam upward that engages a slot in the under-surface of the breechblock slide when the action is closed. [1]

Page 218.jpg

To load the pistol, the breechblock is grasped on the serrated gripping surfaces on the sides, and is pulled straight to the rear. The magazine follower rises to hold the action open, while the cross beam at the forward end of the slide compresses the recoil spring. A loaded stripper clip is inserted into the clip guide in the face of the breech block, and then the cartridges are stripped into the magazine, compressing the spring below the follower. An illustration of this process is shown in the drawing from page 214 of the above-mentioned work. The spring lip at the top of the magazine serves to hold the cartridges. The cam on the right side of the frame, being forced up by the lesser arm of the mainspring, pushes the cam into the slot in the under-surface of the breechblock slide, holding the action open. [1]

Because of this cam hold-open, the pistol does not close when the clip is removed. However, drawing back slightly on the breechblock will ride it over the cam, and releasing it will permit the recoil spring to close the action.

As the breechblock goes forward, the extractor mounted in the top of the block will snap over the extracting groove of the cartridge as it is chambered. [1]

Discharging

Movement of the trigger, linked to the trigger bar, releases the sear from the hammer notch. The compressed arm of the mainspring pushes against the hammer notch, rotating the hammer on its axis to strike the firing pin, discharging the cartridge.

The breechblock starts back at the instant of discharge, carrying the empty cartridge case with the assistance of the extractor. The empty cartridge case is brought sharply against the ejector, which is a bar at the back of the magazine. The underside of the breechblock is slotted to travel over the ejector.

The recoiling slide riding over the hammer causes the hammer to rotate on its axis, locking the sear in the notch of the left hammer fork.

The magazine spring forces the next cartridge up into line. At the apex of the recoil stroke, the recoil spring acts to reverse the direction of the breechblock, chambering the fresh cartridge. Until trigger pressure is released, another discharge is not possible. [1]

1038778871 man3 001.jpg

Magazine unload lever

A unique feature of this pistol is the unloading device. While the breechblock is held open, pulling down on the serrated lever on the right side at the top of the grip panel will withdraw the lip which is holding the cartridges in the magazine, enabling the magazine spring to move the platform up, forcing all the cartridges out of the magazine.

1745 discharge lever.jpg

Developmental versions

After the disappointing reception of the Mannlicher M1894, the more conventional Mannlicher M1896 appeared, externally resembling the Mauser C96. The M1896 had a fixed magazine ahead of the trigger holding six or seven cartridges. However, most production of this design was an improved M1897/01 which used a detachable six-shot magazine in the same location. Both the M1896 and M1897/01 were chambered for the 7.65×25mm Mannlicher, and both could be fed from the top with a stripper clip. Fewer than 1,000 M1896s and M1897/01s were manufactured, in several variations including a detachable shoulder stock model, a carbine version, and a trial model tested by the Swiss military.

The Mannlicher M1898 was a complete redesign, moving the magazine back, into the location of the later M1901, for loading from an 8-round stripper clip. The M1899 had a large safety lever mounted on the left side of the frame. Embellished pistols were presented to German Emperor Kaiser Wilhelm, and to Ottoman Sultan Abdul Hamid II, but production of the M1898 and M1899 was less than 350, following which the design was improved to the M1901, with its slide-mounted, hammer-blocking safety, and convenient lever lock for easier disassembly. [3]

Users

See also

Related Research Articles

<span class="mw-page-title-main">Action (firearms)</span> Functional mechanism of breech-loading

In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.

A semi-automatic firearm, also called a self-loading or autoloading firearm, is a repeating firearm whose action mechanism automatically loads a following round of cartridge into the chamber and prepares it for subsequent firing, but requires the shooter to manually actuate the trigger in order to discharge each shot. Typically, this involves the weapon's action utilizing the excess energy released during the preceding shot to unlock and move the bolt, extracting and ejecting the spent cartridge case from the chamber, re-cocking the firing mechanism, and loading a new cartridge into the firing chamber, all without input from the user. To fire again, however, the user must actively release the trigger, allow it to "reset", before pulling the trigger again to fire off the next round. As a result, each trigger pull only discharges a single round from a semi-automatic weapon, as opposed to a fully automatic weapon, which will shoot continuously as long as the ammunition is replete and the trigger is kept depressed.

<span class="mw-page-title-main">CZ 52</span> Semi-automatic pistol

The CZ 52 is a semi-automatic pistol designed by two brothers, Jan and Jaroslav Kratochvíl, in the early 1950s for the Czechoslovak military. Around 200,000 vz. 52s were made by Česká Zbrojovka in Strakonice from 1952 to 1954. Before standardizing on the 7.62×25mm vz. 52, the Czechoslovak military used several domestic and foreign pistol models in three different calibers. After 30 years of military service, the vz. 52 was eventually replaced by the 9×18mm Makarov caliber vz. 82.

<span class="mw-page-title-main">Clip (firearms)</span> Device used to hold ammunition for firearms

A clip is a device that is used to store multiple rounds of ammunition together as a unit for insertion into the magazine or cylinder of a firearm. This speeds up the process by loading the firearm with several rounds at once, rather than one at a time. There are several types, most made of inexpensive stamped sheet metal, intended to be disposable, though they are often re-used.

<span class="mw-page-title-main">Breechblock</span> Part of the firearm action

A breechblock is the part of the firearm action that closes the breech of a breech loading weapon before or at the moment of firing. It seals the breech and contains the pressure generated by the ignited propellant. Retracting the breechblock allows the chamber to be loaded with a cartridge.

<span class="mw-page-title-main">Mannlicher M1894</span> Semi-automatic pistol

The Mannlicher M1894 was an early blow-forward semi-automatic pistol.

<span class="mw-page-title-main">Beretta M1951</span> Semi-automatic pistol

The Beretta M1951 is a 9×19mm semi-automatic pistol developed during the late 1940s and early 1950s by Pietro Beretta S.p.A. of Italy. The pistol was produced strictly for military use and was introduced into service with the Italian Armed Forces and other Italian security forces as the Modello 1951 (M1951), replacing the Modello 1934 pistol chambered for the 9×17mm Short cartridge.

The Mannlicher–Schönauer is a rotary-magazine bolt-action rifle produced by Steyr Mannlicher for the Greek Army in 1903 and later used in small numbers by the Austro-Hungarian Army. Post-war it was sold for civilian use.

<span class="mw-page-title-main">Ferdinand Mannlicher</span> Austrian firearms designer (1948 - 2009)

Ferdinand Ritter von Mannlicher was an Austrian engineer and small arms designer. Along with James Paris Lee, Mannlicher was particularly noted for inventing the en-bloc clip charger-loading box magazine system. Later, while making improvements to other inventors' prototype designs for rotary-feed magazines, Mannlicher, together with his protégé Otto Schönauer, patented a perfected rotary magazine design, the Mannlicher–Schönauer rifle, which was a commercial and military success.

Steyr Arms is a firearms manufacturer based in Sankt Peter in der Au, Austria. Originally part of Steyr-Daimler-Puch, it became independent when the conglomerate was broken up in 1989. Prior to 1 January 2019, the company was named Steyr Mannlicher AG.

<span class="mw-page-title-main">Steyr M</span> Series of semi-automatic pistols

The Steyr M is a series of semi-automatic pistols developed by Steyr Mannlicher GmbH & Co KG of Austria for police services and the civilian shooting market. Design work on the new pistol began in the early 1990s and the final product known as the M9 was officially unveiled in the spring of 1999. The M40 version chambered in .40 S&W was developed before the M9, followed later by the M357 and two smaller variants of the M9 and M40 designated the S9 and S40 respectively. These pistols were developed primarily for concealed carry and have a shortened barrel, slide, smaller frame and a reduced magazine capacity. In 2013, the Steyr M (Medium) and S (Small) form factors were complemented by the L (Large) sized series and the C (Compact) sized series both available in 9×19mm Parabellum and .40 S&W chamberings as the L9-A1, L40-A1, C9-A1 and C40-A1.

<span class="mw-page-title-main">Trigger (firearms)</span> Mechanism that activates a gun

A trigger is a mechanism that actuates the function of a ranged weapon such as a firearm, airgun, crossbow, or speargun. The word may also be used to describe a switch that initiates the operation of other non-shooting devices such as a trap, a power tool, or a quick release. A small amount of energy applied to the trigger leads to the release of much more energy.

<span class="mw-page-title-main">CZ 45</span> Semi-automatic pistol

The Vzor 45, commonly known as CZ 45 is a compact blowback operated semi-automatic pistol chambered in .25 ACP. It was made in Czechoslovakia and later in the Czech Republic. Derived from the CZ-36 following World War II, the CZ-45 is currently manufactured by Česká zbrojovka Uherský Brod as the CZ-92.

<span class="mw-page-title-main">Colt M1900</span> Semi-automatic pistol

The Colt Model 1900 is a short-recoil operated "self-loading", or semi-automatic .38 caliber handgun introduced by Colt's Manufacturing Company at the turn of the 20th century. The M1900 was the first firearm to be chambered in .38 ACP and was the first handgun to utilize short-recoil operation.

<span class="mw-page-title-main">Stechkin automatic pistol</span> Type of Soviet machine pistol

The Stechkin or APS is a Soviet selective fire machine pistol chambered in 9×18mm Makarov and 9×19mm Parabellum introduced into service in 1951 for use with artillery and mortar crews, tank crews and aircraft personnel, where a cumbersome assault rifle was deemed unnecessary. Seeing service in a number of wars such as the Vietnam War, Russo-Ukrainian War and Syrian Civil War. The APS was praised for its innovative concept and good controllability for its size. However, the high cost of the weapon, complex and time-consuming machining, combined with a limited effective range, large size and weight for a pistol, and fragile buttstock have been mentioned as a reason to phase it out of active service in favour of assault rifles such as the AKS-74U. The pistol bears the name of its developer, Igor Stechkin.

<span class="mw-page-title-main">Bergmann 1896</span> Semi-automatic pistol

The Bergmann 1896 was a 19th-century semi-automatic pistol developed by German designer Louis Schmeisser and sold by Theodor Bergmann's company. A contemporary of the Mauser C96 and Borchardt C-93 pistols, the Bergmann failed to achieve the same widespread success, although Bergmann himself later went on to design one of the earliest practical and successful sub-machine guns, the MP-18.

<span class="mw-page-title-main">Schwarzlose Model 1908</span> Semi-automatic pistol

The Schwarzlose Model 1908 was a semi-automatic pistol, designed by Andreas Schwarzlose, released in 1908 in the German Empire and produced until 1911.

<span class="mw-page-title-main">Steyr M1912 pistol</span> Semi-automatic pistol, Machine pistol (Repetierpistole M1912/P16)

The Steyr M1912, also known as the Steyr-Hahn, is a semi-automatic pistol developed in 1911 by the Austrian firm Steyr Mannlicher, based on the mechanism of the Roth–Steyr M1907. It was developed for the Austro-Hungarian Army and adopted in 1912. It was the standard Austro-Hungarian military handgun of World War I. It was able to endure the adverse conditions of trench warfare during World War I.

<span class="mw-page-title-main">Roth–Steyr M1907</span> Semi-automatic pistol

The Roth–Steyr M1907, or, more accurately Roth-Krnka M.7 was a semi-automatic pistol issued to the Austro-Hungarian kaiserliche und königliche Armee cavalry during World War I. It was the first adoption of a semi-automatic service pistol by the army of a major military power.

<span class="mw-page-title-main">Mannlicher M1905</span> Semi-automatic pistol

The Modelo 1905 is a pistol designed by Ferdinand Ritter von Mannlicher in 1899 and originally produced in Austria as the Mannlicher Model 1901. The Mannlicher Model 1901 was an improved version of the Model 1900, both of which were produced by Österreichische Waffenfabriks-Gesellschaft. All of these models have the same basic design and operation, but minimal adjustments were made to improve each of them. The Modelo 1905 is the version of the Model 1901 that the Argentine Army purchased from Steyr in 1905. This semi-automatic pistol has a unique and elegant appearance due to the curve of the handgrip. It is single action and uses a blowback operation system to reload. Like its predecessors, the Modelo 1905 has a non-detachable magazine that can be loaded from the top with a stripper clip.

References

  1. 1 2 3 4 5 6 7
    • Wilson, R. K. Textbook of Automatic Pistols, pp.134–137 Plantersville, SC: Small Arms Technical Publishing Company, 1943.
  2. Mannlicher Rifles and Pistols, Smith, 1947
  3. Antaris, Leonardo M. (2017). "In the Beginning". American Rifleman . 165 (10). National Rifle Association of America: 79&81.
  4. Ramsey, Syed (12 May 2016). Tools of War: History of Weapons in Early Modern Times. Vij Books India Pvt Ltd. ISBN   978-93-86019-82-0.
  5. "Mannlicher Argentine Model 1905 Semi Automatic Pistol". NRA Museums. Retrieved 10 October 2020.