Ruger Standard | |
---|---|
Type | Semi-automatic pistol |
Place of origin | United States |
Production history | |
Designer | William Ruger |
Designed | 1949 |
Manufacturer | Sturm, Ruger |
Produced | 1949–present |
Variants |
|
Specifications | |
Barrel length |
|
Cartridge | .22 Long Rifle |
Action | blowback |
Feed system | 9- or 10-round box magazine |
Sights | Open iron sights, both fixed and adjustable |
The Ruger Standard Model is a rimfire semi-automatic pistol introduced in 1949 as the first product manufactured by Sturm, Ruger & Co., and was the founding member of a product line of .22 Long Rifle cartridge handguns, including its later iterations: the MK II, MK III, and MK IV. It is marketed as an inexpensive .22 caliber rimfire intended for casual sport and target shooting, and plinking. Designed by company founder William B. Ruger, the Standard model and its offspring went on to become the most accepted and successful .22 caliber semi-automatic pistols ever produced. [1] [2]
Sometime in the years following World War II, firearm designer and entrepreneur Bill Ruger acquired a pair of World War II Japanese Nambu pistols from a returning US Marine, which he successfully duplicated in his garage. [3] Using the Nambu's silhouette and bolt system, Ruger produced his first prototype, but lacked the venture capital necessary to fund its introduction. When his affluent friend and potential financial backer Alex Sturm was shown the 1949 prototype Ruger had created, he was impressed by its sleek traditional aesthetic and its slight resemblance to the classic nostalgia-evoking German Luger P08 pistol.
Realizing that prospective buyers would share his sentiment, Sturm quickly signed on board with an initial investment of $50,000 and the two teamed to create what was to become an iconic American firearms manufacturing company, Sturm, Ruger & Co. [1] [2] Ruger's new product was simply christened the "Standard" model. Intended as a low-cost recreation and sporting product for outdoor, hunting and firearms enthusiasts, Ruger pioneered a number of simple and innovative manufacturing techniques used in the production of the new pistol, including using piano wire coiled springs in the lockwork in lieu of the flat springs most manufacturers were using at the time, and forming the receivers from two stamped and welded sheet metal halves.
These practices worked well with a firearm which needed to handle only .22 rimfire pressures, and the cost savings it produced allowed Sturm and Ruger to radically undersell the competition which still used older and more expensive manufacturing techniques. [2] Financier Sturm, an amateur heraldry aficionado, made his own contribution in the form of the company's trademark "Red Eagle" coat of arms emblem, which was featured as a medallion on the left grip panel. [1] [2] A favorable review published in the American Rifleman magazine penned by the notable firearms authority Major General Julian S. Hatcher, coupled with a subdued advertisement printed in the same magazine, resulted in a great deal of interest from the public. [1] The suggested retail price for the new pistol was a reasonable and very competitive US$37.50. [4]
Checks from would-be purchasers soon rolled in, but as Ruger was firmly entrenched in the "old school" of financial responsibility, none were cashed until product actually shipped, set a standard for "in the black" operation which would serve the company well in the future. In a few months the seed money was all spent, but by then the first 100 Standard pistols had been built and distributed to the initial purchasers. [2]
From the time of its introduction in the fall of 1949, the new pistol was a success, and though it faced competition from the beginning, it soon dominated a large share of the rimfire pistol market segment. Unfortunately, Alex Sturm did not survive to see the corporation's ultimate success, suffering an untimely demise from viral hepatitis in November 1951. [2] In memory of, and as a mark of respect and bereavement, Ruger ordered the background of Sturm's eagle emblem changed from red to black on future production models of the popular and successful firearm they produced and marketed together. [1] [2]
The Standard model remained in continuous production with minor improvements for the next 33 years, but the new corporation expanded the basic Standard archetype into a product line of pistols over time by the introduction of a number of variant models. These took the form of offering additional barrel lengths and configurations, creating versions optimized for target shooting, and adding the finish option of stainless steel. The line was also refined with three mechanical "Mark" series upgrades, the MkII, MkIII and MkIV, in 1982, 2004 and 2016 [2] The MkII added a slide stop that held the slide open on the last round, and also was available in stainless steel. The MKII was available in a number of barrel lengths; 4.75 in (12.1 cm) and 6 in (15 cm) lightweight barrels; 4 in (10 cm), 5.5 in (14 cm), 6.875 in (17.46 cm) and 10 in (25 cm) bull barrels, and 5.25 in (13.3 cm) and 6.875 in (17.46 cm) heavy tapered barrels. All guns with bull or heavy tapered barrels are Target models, and are equipped with target sights consisting of an adjustable rear sight and a taller, wider front sight, with an aggressive undercut to reduce glare. In 1999 18 versions of this popular pistol could be found in the Sturm Ruger catalog, and with over 2 million sold it eventually became the most prolific and well-liked .22 automatic pistol of all time. [1] [2]
The Ruger Standard has been used in several notable crimes:
The Standard model is an atypical design, lacking the slide found on conventional pistols, instead sporting a cylindrical bolt which cycles inside a tubular receiver in a manner more characteristic of a rimfire rifle. The bolt of the pistol features protruding "ears" at its rear which are grasped and pulled rearward to feed the initial round and cock the action. Using the basic blowback form of operation, the Standard model originally came with a blued carbon steel finish and was equipped with a 4.75-inch (12.1 cm) tapered barrel.
The magazine held 9 rounds of .22 Long Rifle ammunition and was held in place by a catch on the bottom of the grip frame. Standard models came with Patridge style fixed iron open sights with the rear sight securely mounted in a dovetail. The grip panels were hard black checkered Butaprene synthetic rubber, with pre-1950 pistols featuring the "Red Eagle" trademark as originally designed by Alex Sturm. The manual safety on the Standard model could be engaged only when the pistol was cocked, and the bolt could be locked open by activating the safety with the bolt held back. [2]
The bolt was left "in the white" with the unfinished steel providing a visual contrast with the blued receiver. [1] In 1954 a new model with a barrel length of 6 inches was added to the Standard lineup. [2] In 1971, one of the few engineering changes ever made to the Standard model took place when the original 22-year-old receiver forming dies wore out. [2] As a precursor to changes to come with the 1982 introduction of the MK II series, the slot for the magazine follower extension on the grip frame was moved from the right to the left side.
Designated the "A 100" frame modification, this alteration facilitated the eventual improvement of the Standard pistol by the addition of a bolt hold open device as part of the eventual MK II upgrade. [2] The pistol grip panels and magazines from older Standard models can not be used on post-1971 pistols due to this change, but the later magazines can still be used on pre-1971 guns by moving the magazine follower button to the opposite side. [2] As the Standard model reached the end of its product lifecycle in 1981, a special edition run of 5000 4.75-inch pistols built of stainless steel were manufactured. These pistols were shipped in special wooden cases and featured an engraving of Bill Ruger's signature. [2]
Introduced in 1950, the MK I Target model was basically the same as the Standard pistol, except that it boasted a 6.875-inch (17.46 cm) barrel, adjustable target style trigger, a "Micro" adjustable rear sight, and a front sight blade undercut to reduce glare. [2] In 1952, a 5.25-inch (13.3 cm) barreled version of the MK I Target was added to the lineup, but manufactured only through 1957, making it a collectible rarity today. [2] A 5.5-inch (14 cm) heavy bull barreled version of the MK I Target became available in 1963, eventually becoming the most popular length for Ruger Target MK pistols. [2] Like their Standard model brethren, target models underwent the A 100 grip frame redesign in 1971. [2]
Ruger MK II | |
---|---|
Type | Semi-automatic pistol |
Place of origin | United States |
Production history | |
Manufacturer | Sturm, Ruger & Co. |
Produced | 1982—2005 |
No. built | 3,000,000+ |
Specifications | |
Mass | 46 oz. (w/6+7⁄8 in bull barrel) |
Length | 11 1/8 in (w/6+7⁄8 in bull barrel) |
The MK II ("Mark Two") was made from 1982 to 2005. It replaced the Standard, Ruger's first model, made from 1949 to 1982, and the MK I Target, made from 1951 to 1982. MK II variations include the Target models, which have heavier barrels and adjustable sights, and the 22/45 models, which have a polymer frame with a grip-angle that matches the Colt 1911 rather than the steel frame's Luger P08–like layout. Three barrel types were available. Taper barrels were available in 4+3⁄4″,5+1⁄4″, 6″, and 6+7⁄8″ lengths, and could be equipped with fixed sights in any length or adjustable sights on 6″ and 6+7⁄8″ length barrels. Bull barrels were available on the Mark II in 5+1⁄2″, 6+7⁄8″, and 10″ lengths and all had adjustable sights. The slab-sided target models were available with 5+1⁄2″ and 6+7⁄8″ barrels and had adjustable sights. All Ruger Mark II pistols were available in either a blued finish or stainless steel except for the slab side Target Models, which only came in stainless. The MK II was removed from production in 2004, when it was replaced by the MK III. All Ruger rimfire pistols are chambered in .22 Long Rifle only.
Some special variants that command higher prices are the Government Target Model, a model that was used for pistol training and competition by the United States Army,[ citation needed ] and the Red Eagle models, which were made from 1949 to the year of company co-founder Alexander Sturm's death, in 1951. The Red Eagle models had the Ruger logo in red on a silver background. Since then, the Ruger logo on the grip panels has been either black on silver or silver on black, with the exception of a special 50th Anniversary model that had a silver eagle on a red background. The top-of-the-line Government Target Model comes with a 6.875 in (17.46 cm) bull barrel and wood thumb-rest target grips. The competition Target Model is identical to the Government Target Model with the addition feature of flats cut along each side of the barrel to reduce weight. Sometime during the span of Mark II production, Ruger started drilling its receivers for and providing a low profile scope base, and 1″ scope rings. With the addition of a pistol scope or red dot sight, these make ideal entry level bullseye pistol.
The suppressed Mk II was used by United States Navy SEALs. [18] This variant is considerably quieter than a standard Mk II and accurate to 70 m (230 ft). [19]
The AWC TM-Amphibian "S" is an integrally-suppressed variant of the Ruger Mk II Target .22 LR pistol. The sound suppressor uses a primary baffle of 303 stainless steel and a secondary baffle of 6061-T6 aluminum alloy. The AWC weapon manual states, "This suppressor is 'Amphibious' and can be fired with water. A couple of tablespoons of water can be poured into the suppressor for extra quiet operation." [20] It uses both standard and high velocity ammunition reliably and is finished in U.S. Navy spec stainless-matte finish. The pistol has an overall length of 13.25 in (33.7 cm), a suppressor length of 7 in (18 cm), a diameter of 1 in (2.5 cm) and weighs 41 oz (1,200 g). [21] This weapon is classified in the U.S. as a Title II weapon and requires a $200 transfer or manufacture tax in addition to registration with the ATF.
This section needs additional citations for verification .(May 2011) |
Ruger MK III | |
---|---|
Type | Semi-automatic pistol |
Place of origin | United States |
Production history | |
Manufacturer | Sturm, Ruger & Co. |
Produced | 2004—2016 |
Variants | See Models |
Specifications | |
Mass | 31–45 oz (880–1,280 g) [22] |
Length | 9–11.12 in (229–282 mm) [22] |
Barrel length | 4.75–6.88 in (121–175 mm) [22] |
Cartridge | .22 Long Rifle |
Barrels | 1:16" Right hand twist [22] |
The MK III ("Mark Three") is the third-generation successor to the original Ruger Standard. The MK III replaced the MK II in 2004, and production of the MK III ended on December 8, 2016; it was succeeded by the MK IV.
Two types of MK III pistols were produced.
The first lineup is simply known as Mark III. The pistol's barrel is made from steel bar and is threaded into the receiver which is made from steel tube. The barrel is not removable without machining, though. The layout is similar to the Luger P08, although the operating mechanism was originally copied from the Nambu pistol.
Catalog number | Model | Finish | Sight | Length | Approx. weight | ||||
---|---|---|---|---|---|---|---|---|---|
Blued | Stainless | Rear | Front | Barrel | Overall | ||||
Standard | MKIII4 | Standard | * | Fixed | Fixed | 43⁄4" | 9" | 35 oz | |
MKIII6 | Standard | * | Fixed | Fixed | 6" | 103⁄4" | 37 oz | ||
Target | MKIII512 | Bull Bbl. | * | Adjustable | Fixed | 51⁄2" | 93⁄4" | 42 oz | |
KMKIII512 | Bull Bbl. | * | Adjustable | Fixed | 51⁄2" | 93⁄4" | 42 oz | ||
KMKIII678GC | Competition | * | Adjustable | Fixed | 67⁄8" | 111⁄8" | 45 oz | ||
KMKIII678H | Hunter | * | Adjustable | HiViz fiber optic | 67⁄8" | 111⁄8" | 41 oz | ||
KMKIII45H | Hunter | * | Adjustable | HiViz fiber optic | 41⁄2" | 83⁄4" | 38 oz |
The second lineup is named Mark III 22/45. These pistols have a polymer frame, and the steel barrel is installed nearly permanently into a tubular steel receiver. The grip angle emulates that of a M1911.
Catalog Number | Model | Finish | Sight | Length | Approx. weight | ||||
---|---|---|---|---|---|---|---|---|---|
Blued | Stainless | Aluminum | Rear | Front | Barrel | Overall | |||
P45MK3ALRP | Lite | * | Adjustable | Fixed | 41⁄2" | 81⁄2" | 22 oz | ||
P4MKIII | Target | * | Adjustable | Fixed | 4" | 8" | 31 oz | ||
P512MKIIIRP | Target | * | Fixed | Fixed | 51⁄2" | 91⁄2" | 33 oz | ||
P512MKIII | Target | * | Discont. | Adjustable | Fixed | 51⁄2" | 91⁄2" | 35 oz | |
P45GMK3RP | Threaded | * | Fixed | Fixed | 41⁄2" | 81⁄2" | 32 oz | ||
P45GMK3PRRP | Threaded | * | Picatinny rail | None | 41⁄2" | 81⁄2" | 32 oz | ||
KP512MKIII | Bull barrel | * | Adjustable | Fixed | 51⁄2" | 91⁄2" | 35 oz | ||
KP678HMKIII | Hunter | * | Adjustable | HiViz fiber optic | 67⁄8" | 107⁄8" | 34 oz |
Ruger MK IV | |
---|---|
Type | Semi-automatic pistol |
Place of origin | United States |
Production history | |
Manufacturer | Sturm, Ruger & Co. |
Produced | 2016–present |
Variants | See Models |
Specifications | |
Mass | 25.0–53.5 oz (710–1,520 g) |
Length | 8.4–14.0 in (210–360 mm) |
Barrel length | 4.4–10.0 in (110–250 mm) |
Barrels | 1:16" Right hand twist [24] |
The MK IV ("Mark Four") is the fourth-generation successor to the original Ruger Standard. Introduced in 2016, the MK IV succeeded the MK III.
The most significant feature of the Mk IV redesign is a hinged connection between the upper receiver and the grip frame. This design enables the user to disassemble the firearm with a significantly simplified process compared to prior models. [25]
Other design changes include: a redesigned trigger group, a redesigned bolt stop, an ambidextrous thumb safety, and a "drop free" magazine release mechanism. [25]
In June 2017, Ruger issued a safety recall on MK IVs for a defective trigger and safety mechanism. If the safety were midway between the "safe" and "fire" positions when the trigger was pulled, the gun could discharge when the safety was moved to the "fire" position. MK IVs with serial numbers beginning with "401" (2017 models) or "WBR" (2016 models) were recalled. [26] [27]
|
Catalog Number | Model | Finish | Sight | Length | Approx. weight | Notes | Ref. | |||
---|---|---|---|---|---|---|---|---|---|---|
Barrel | Grip | Rear | Front | Barrel | Overall | |||||
40101 | Target | Blued | Aluminum | Adjustable | Fixed | 5.50" | 9.75" | 35.6 oz | [28] | |
40103 | Target | Stainless | Stainless | Adjustable | Fixed | 5.50" | 9.75" | 42.8 oz | [29] | |
40104 | Standard | Blued | Aluminum | Fixed | Fixed | 4.75" | 9.00" | 28.2 oz | [30] | |
40105 | Standard | Blued | Aluminum | Fixed | Fixed | 6.00" | 10.25" | 30.1 oz | [31] | |
40107 | 22/45 | Blued | Polymer | Adjustable | Fixed | 5.50" | 9.75" | 34.4 oz | [32] | |
40112 | Competition | Stainless | Stainless | Adjustable | Fixed | 6.88" | 11.12" | 45.8 oz | [33] | |
40118 | Hunter | Stainless | Stainless | Adjustable | Fiber optic | 6.88" | 11.12" | 44.0 oz | [34] | |
40126 | Target | Stainless | Stainless | Adjustable | Fixed | 5.50" | 9.75" | 42.8 oz | Threaded barrel | [35] |
40149 | 22/45 Tactical | Blued | Polymer | Adjustable | Fixed | 4.40" | 8.50" | 33.3 oz | Threaded barrel | [36] |
40150 | Tactical | Blued | Aluminum | Adjustable | Fixed | 4.40" | 8.50" | 34.6 oz | Threaded barrel | [37] |
40159 | Target | Blued | Aluminum | Adjustable | Fixed | 5.50" | 9.75" | 35.8 oz | Target laminate grips | [38] |
40160 | Hunter | Stainless | Stainless | Adjustable | Fiber optic | 6.88" | 11.12" | 44.2 oz | Target laminate grips | [39] |
40167† | 22/45 Tactical | Cerakote | Polymer | Adjustable | Fixed | 4.40" | 8.50" | 33.3 oz | Threaded barrel | [40] |
40172† | Hunter | Stainless | Stainless | Adjustable | Fiber optic | 4.50" | 8.50" | 38.5 oz | [41] | |
40173 | Target | Blued | Aluminum | Adjustable | Fixed | 10.00" | 14.00" | 46.3 oz | [42] | |
40174 | Target | Stainless | Stainless | Adjustable | Fixed | 10.00" | 14.00" | 53.5 oz | [43] | |
43921 | 22/45 Lite | Anodized (gray) | Polymer | Adjustable | Fixed | 4.40" | 8.40" | 27.0 oz | Target laminate grips | [44] |
43910† | 22/45 Lite | Anodized (red) | Polymer | Adjustable | Fixed | 4.40" | 8.40" | 25.0 oz | Threaded barrel | [45] |
43915† | 22/45 Lite | Anodized (magenta) | Polymer | Adjustable | Fixed | 4.40" | 8.40" | 25.0 oz | Threaded barrel | [46] |
43916† | 22/45 Lite | Anodized (olive drab) | Polymer | Adjustable | Fixed | 4.40" | 8.40" | 25.0 oz | Threaded barrel | [47] |
43924† | 22/45 Lite | Anodized (cobalt) | Polymer | Adjustable | Fixed | 4.40" | 8.40" | 25.0 oz | Threaded barrel | [48] |
43926 | 22/45 Lite | Anodized (gold) | Polymer | Adjustable | Fixed | 4.40" | 8.40" | 25.0 oz | Threaded barrel | [49] |
43927 | 22/45 Lite | Anodized (black) | Polymer | Adjustable | Fixed | 4.40" | 8.40" | 25.0 oz | Threaded barrel | [50] |
43934 | 22/45 Lite | Anodized (gray) | Polymer | Adjustable | Fixed | 4.40" | 8.40" | 25.0 oz | Threaded barrel | [51] |
† Distributor exclusive models
The Mini-14 is a lightweight semi-automatic rifle manufactured by Sturm, Ruger & Co. Introduced in 1973, the design was outwardly based on the M14 rifle and is, in appearance, a scaled-down version chambered in 5.56×45mm NATO, though with its own gas system design.
Sturm, Ruger & Company, Inc., better known by the shortened name Ruger, is an American firearm manufacturing company based in Southport, Connecticut, with production facilities also in Newport, New Hampshire; Mayodan, North Carolina; and Prescott, Arizona. The company was founded in 1949 by Alexander McCormick Sturm and William B. Ruger and has been publicly traded since 1969.
The Colt Anaconda is a large frame double-action revolver featuring a full length under-barrel ejection-rod lug and six round cylinder, designed and produced by the Colt's Manufacturing Company in 1990. Chambered for the powerful .44 Magnum and .45 Colt centerfire ammunition cartridges, the Anaconda marked the Hartford, Connecticut firm's first foray into the popular large-bore Magnum pistol market.
The Ruger 10/22 is a series of semi-automatic rifles produced by American firearm manufacturer Sturm, Ruger & Co., chambered for the .22 Long Rifle rimfire cartridge. It uses a patented 10-round rotary magazine, though higher capacity box magazines are also available. The standard carbine version of the Ruger 10/22 has been in production continuously since 1964, making it one of the most successful rimfire rifle designs in history, with numerous third party manufacturers making parts and accessories for upgrading and customization. The 10/22's aftermarket is so prolific that a complete 10/22 can be built without using any Ruger-made components.
The Ruger P series is a line of centerfire semi-automatic pistols made by Sturm, Ruger & Company produced from 1985 to 2013. The P-series pistols were designed for military, police, civilian and recreational use. The designs are largely based on the Browning action found in the M1911 pistol, but with minor variations, generally related to the safety mechanism and the barrel-camblock interface. Reviews have considered them rugged, reliable, and strong, though this strength comes at the price of bulk and a blocky appearance.
The Beretta U22 Neos is a .22 Long Rifle semi-automatic, single-action pistol using a slide blow-back system, that has been manufactured in the United States since 2002 by Beretta USA. The pistol will accept interchangeable 4.5, 6 or 7.5 in barrels in blued or stainless steel finishes. Each barrel incorporates a built-in Weaver-style rail to accommodate optics or accessories. Beretta markets the Neos as a modern, reasonably priced pistol suitable for a beginner, yet is customizable to suit the experienced marksman.
The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.
The GP100 is a family/line of double action five-, six-, seven-, or ten-shot revolvers made by Sturm, Ruger & Co., manufactured in the United States. Since its introduction, it has been produced with a number of variations including various barrel lengths and profiles, fixed or adjustable sights, and in blued carbon steel or stainless steel.
The Super Redhawk is a line of double-action magnum revolvers made by Sturm, Ruger beginning in 1987, when Ruger started making weapons using larger, more powerful cartridges such as .44 Magnum, .454 Casull, and .480 Ruger.
A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.
The Ruger Single-Six is a single-action rimfire revolver produced by Sturm, Ruger & Co. The Single-Six was first released in June 1953.
The Colt Trooper is a medium frame, double-action revolver featuring a six-round cylinder, chambered for .22 Long Rifle, .22 Winchester Magnum Rimfire, .38 Special, and .357 Magnum caliber cartridges. Designed as a less expensive alternative to the upscale Colt .357 and the later Colt Python and Colt King Cobra, it was marketed to law enforcement agencies as well as civilians.
The Ruger Security-Six and its variants, the Service-Six and Speed-Six are a product line of double-action revolvers introduced in 1972 and manufactured until 1988 by Sturm, Ruger & Co. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.
The Ruger American Rifle is a family of budget-level hunting/sporting bolt-action centerfire rifle made by Sturm, Ruger & Co., which also produces a line of rimfire rifles with similar designs called the Ruger American Rimfire.
The Smith & Wesson Model 422, is a semi automatic .22 LR pistol manufactured by Smith & Wesson.
The Ruger SR22 or SR22P is a compact semi-automatic pistol manufactured by Sturm, Ruger & Co., chambered for the .22 Long Rifle rimfire cartridge. The SR22 is mainly targeted at plinking and competition shooting.
The Ruger AR-556 is a semiautomatic AR-15 style rifle manufactured by U.S. firearms company Sturm, Ruger & Co. Introduced in 2014 as an entry-level AR-15 using a direct impingement action, with variants since being released such as the upgraded AR-556 MPR in 2017 and the AR-556 pistol in 2019.
The CZ 455 is a series of magazine-fed bolt-action rimfire repeating rifle manufactured by the Czech firearms manufacturer Česká Zbrojovka Uherský Brod and imported into the United States by CZ-USA. It is a successor of the highly popular CZ 452 rifles, and is chambered for the .22 LR, .22 WMR and .17 HMR calibers.
Ruger American Rimfire is a rimfire bolt-action rifle manufactured by Sturm, Ruger & Co. in the United States. The firearm has some visual similarities with the larger centerfire Ruger American Rifle, and both are marketed as budget hunting rifles.
The Ruger Wrangler is a single-action rimfire revolver produced by Sturm, Ruger & Co. Chambered for .22 Long Rifle cartridges, it was announced in April 2019. The revolver makes extensive use of aluminum and zinc castings for ease of manufacturability, and also has an unfluted cylinder and uses metal injection molded components for further cost reduction. The Wrangler's price point has been described as "very attractive", and is less than half the MSRP of Ruger's Single-Six and Bearcat models.
SEALs may be equipped with a wide variety of small arms, ranging from the 0.22-caliber (LR) Ruger Mk 2 through...
{{cite book}}
: CS1 maint: location (link)