Ruger P series

Last updated
Ruger P series
Ruger P89 1.png
Ruger P89
Type Semi-automatic pistol
Place of originUnited States
Production history
Designed1985 (P85)
Manufacturer Sturm, Ruger & Co.
Produced1985–2013
VariantsSee Variants
Specifications
Mass32 oz (910 g) (P89)
Length7.75 in (197 mm) (P89)
Barrel  length4.50 in (114 mm) (P89)

Cartridge
Action Short recoil
Effective firing range55 yd (50 m)
Feed systemDetachable box magazine:
Sights 3-dot sight

The Ruger P series is a line of centerfire semi-automatic pistols made by Sturm, Ruger & Company produced from 1985 to 2013. The P-series pistols were designed for military, police, civilian and recreational use. The designs are largely based on the Browning action found in the M1911 pistol, but with minor variations, generally related to the safety mechanism and the barrel-camblock interface. Reviews have considered them rugged, reliable, and strong, though this strength comes at the price of bulk and a blocky appearance. [1]

Contents

Design details

The P-series pistols are short recoil–operated, locked breech semi-automatic pistols. They use a SIG P220 type locking system, and an M1911-style tilting barrel. The P series were made with a traditional double-action/single-action (DA/SA), or double-action-only (DAO) trigger mechanism.

The standard models have an ambidextrous manual safety/decocker located on the slide; when the safety lever is lowered to the safe position, the firing pin is cammed into the slide away from the hammer, the trigger is disconnected from the sear, and the hammer is decocked. The decocker models have no manual safety; instead, when the lever is lowered, it only cams the firing pin into the slide and drops the hammer. When the lever is released, the firing pin springs back to the normal position. The DAO models have no manual safety or decocker. All models feature an automatic firing pin safety that blocks the firing pin unless the trigger is pulled fully rearward. [2] [3]

The pistols make extensive use of investment-cast parts and proprietary Ruger alloys. Nearly all internal parts, including the barrel, are stainless steel, while the slide and ejector are carbon steel. The P85 through P944 use an investment-cast aluminum frame, while the P95 and later models use a fiberglass-reinforced polyurethane frame.

The 9 mm and .40 S&W versions use double-column box magazines; the 9 mm has a 15-round capacity, and the .40 S&W has a 10-round or 12-round capacity. The .45 ACP versions use single-column magazines holding seven or eight rounds (depending on the model). All P-series pistols of the same caliber use a similar magazine design, but slight modifications have been made to at least the 9 mm guns so that not all P-series magazines will function in all P-series frames. Ruger did not keep track of the magazine models so an older magazine may not secure in a newer frame. The Ruger Police Carbine also uses P-series magazines. The P-series pistols have an ambidextrous magazine release located behind the trigger guard; it can be pushed forward from either side to eject the magazine.

The early-model P95s have fixed, three-dot sights; newer P95s, P97s, and P345s have three-dot sights adjustable for windage.

Service

The P85 was originally developed as a replacement alternative for the U.S. Military's 1984 Joint Service Small Arms Program, a venture to replace the aging M1911A1 to a higher-capacity, NATO-compliant weapon. The P85 met all of the military's requirements, including a 20,000-round life expectancy. Despite this, the P85 was not completed in time for the first two trials. It was, however, able to compete in the later XM10 trials in 1988, for which Ruger supplied 30 P85s to the Aberdeen Proving Ground in Maryland. Despite performing well, the Beretta M9, which had succeeded at winning the previous two competitions, won once again and was awarded the contract.

The Ruger P85 did find success with some police departments and civilians, as its rugged design and military qualities did see it adopted by the San Diego Police Department and the Wisconsin State Patrol. [4] Both P85s and P89s were approved for carry by the Chicago Police Department. The P85 was also adopted by the Turkish National Police. [5] In 2004, the US Army awarded Ruger & Co., Inc. a contract for 5,000 KP95D pistols to be delivered to the Army Tank-automotive and Armaments Command, which issued them to Iraqi Army and Police units. [6] [7]

Variants

P85/P85 MKII

The P85 was developed in 1985, but was not available until 1987. [1] It was only available with a DA/SA trigger, decocker, and a manual safety. The P85 was affordable, initially retailing for just $295, about $100 cheaper than its nearest competitors.

The Ruger P85 is a full-sized DA/SA alloy-framed service pistol originally designed to compete in the 1984 U.S. military pistol trials. Unfortunately the design wasn't finalized until after the trials. The P85 found popularity on the civilian and law enforcement markets but many were recalled after one incident with the firing pin, resulting in a discharge. If the firing pin broke in front of the firing pin block, applying the safety, which dropped the hammer, could transfer enough energy to the broken firing pin to cause a discharge. The P85 was recalled, and a new safety was installed that prevented contact between firing pin and hammer during a decocking operation. This modification was done free of charge. This updated P85 was christened as the P85 MK II in 1989. Other updates included larger safety levers and improved accuracy. The P85 MK II was produced for several more years, until 1992. By then the P89 was in production (having been introduced the previous year), which is essentially just a re-branded P85 MK II. After the P89 was introduced, there was no longer a need to produce the P85 and it was discontinued. [1] [3]

Both variants are chambered in 9mm and have a magazine capacity of 15+1 rounds.

P89

Blued Ruger P89 Ruger P89.jpg
Blued Ruger P89

The P89 is an upgraded P85 MKII that introduced a number of new features, including a DAO model. Like the P85, all P89s came with an investment cast aluminum alloy frame. In 1992, Ruger produced a limited-run P89X convertible model, which came with a second barrel and recoil spring assembly that allowed conversion between 9 mm and .30 Luger calibers. Ruger only made 5,750 with both barrels in 1994 only.[ citation needed ] The P89 was one of the most popular and plentiful P-series models. It was discontinued in late 2009. [8]

It was chambered in 9mm, with magazine capacities of 15+1 rounds .

P90

Ruger KP90DC (decocker) Ruger P90DC.jpg
Ruger KP90DC (decocker)

The P90 is a scaled-up version of the P89 chambered in .45 ACP with an investment cast aluminum alloy frame. It was introduced in 1991 as the company's first attempt at a .45 ACP pistol, and was in direct competition with SIG Sauer's P220, Smith & Wesson's 4500 series, and to a lesser extent Glock's G21 that came out the same year. The P90 is considered to have above-average accuracy for its price. The P90 was produced until 2010. [1]

It has a magazine capacity of 7 rounds.

P91

The Ruger P91 is essentially a Ruger P89 chambered in .40 Smith & Wesson. Like its precursors, it also had an investment cast aluminum alloy frame. It was only produced for two years, from 1992 to 1994. It has a magazine capacity of 11 rounds, with 10 round magazines being developed for the 1994 ban.

KP94DC, decock-only model Ruger-P94-p1030138.jpg
KP94DC, decock-only model

P93

The P93 was developed in 1993 but not released until 1994. The P93 was designed as a compact version of the Ruger P89 and, as such, still had the investment cast aluminum alloy frame, though the frame was slimmer than that of the P89 and it omitted some unnecessary parts. It was designed for shooters interested in lighter weight or easier concealability. The P93 lacks the flared nosepiece of the P89 and also features different grips with heavier checkering. Standard capacity was either 15 or 10 rounds. The P93 has a 3.9-inch (99.1 mm) barrel that utilized a dropping link like the P89. A larger number of P93s than other variants were also double action-only without an external safety, due to its intended concealed carry market. The P93 was discontinued in 2004.

P94

Original model KP95, without the Picatinny rail RugerP95.JPG
Original model KP95, without the Picatinny rail

The Ruger P94 is a mid-sized, slightly larger variant of the P93. The P94 has a 4.3-inch (109.2 mm) long barrel as opposed to a 3.9-inch (99.1 mm) barrel and still has the investment cast aluminum alloy frame. Like the P93, the P94 was introduced in 1994. The P94 features different grips with heavier checkering. The P94 has a full-length “streamlined” slide configuration and is chambered for the 9mm Parabellum (9 mm x 19) cartridge, while the P944D is chambered for the .40 S&W cartridge. [9] The P94 was discontinued in 2004, ten years after its introduction. However the P944D variant was produced until 2009.

It can be chambered in either 9mm or .40 S&W, with magazine capacities of 15+1 or 10+1, respectively. [10] There is also a Law Enforcement Use Only 11+1 magazine for the P944 in .40 S&W.

P95

Late model P95PR with Picatinny rail and a Hogue Handall grip installed Ruger p95 left.JPG
Late model P95PR with Picatinny rail and a Hogue Handall grip installed

Introduced in 1996, the P95 incorporated a number of changes from earlier P-series pistols, including a shorter 3.9-inch (99.1 mm) barrel like the P93. The big change was switching the frame construction from an investment cast aluminum alloy to a new high-impact polymer frame made of fiberglass-reinforced polyurethane, based on Dow Chemical's "Isoplast". [2] The P95 was also the first pistol in the series to omit the dropping link underneath the barrel. The first P95s came with a glossy black polymer frame with a hooked trigger guard and lacking an accessory rail and grip texture. Later model P95s featured a matte polymer frame with enhanced grip texturing, an accessory rail and a round trigger guard. The P95 was one of the last in the series to be fully discontinued. Most P95 designs were discontinued in 2004 and 2005, but certain types of the P95 were produced until 2009 and 2013.

It is chambered in 9mm with a magazine capacity of 15+1 rounds.

P97

The P97 is essentially a P95 chambered in .45 ACP, similar to the P90. The P97 feeds from a single-stack 8+1 .45 ACP magazine, the same magazine used in the P90. It was only available in decocker only and double-action only versions. It featured an adjustable rear sight and retained the same glass-filled polymer frame of the P95. The front sight is pinned in, and the rear held in by a set screw. Unlike the P95, however, the P97 never got the improved frame with added grip texture and an accessory rail and retained the original smooth frame. The P97 was manufactured from 1999 to 2004.

P345

The P345, released in 2004, is a transition model between the P series and the SR series. The P345 is chambered in .45 ACP and accepts the same 8+1 single stack magazines as the P90 and the P97. The P345 features a radically different design (as it was intended to usher in Ruger's new pistol designs) and incorporates an integrated keyed lock that locks the safety in the safe position, a loaded chamber indicator, and a magazine disconnect that blocks the firing pin when the magazine is removed. It also has many ergonomic improvements, such as a new polymer frame design (narrower than the double column derived P95 and P97) and low-profile safety levers. It does not feature an ambidextrous slide release or magazine release. Both controls are designed for a right-handed shooter. The model P345PR adds a Picatinny rail to the frame, for mounting lights and other accessories. It was designed to be legal for sale in states that require elaborate safety measures. The P345 was discontinued in 2013 and replaced by the new SR45. [8]

Users

Related Research Articles

<span class="mw-page-title-main">Beretta 9000</span> Semi-automatic pistol

The Beretta 9000 is a series of modern compact size semi-automatic pistols designed and manufactured by Beretta of Italy. It is used primarily for civilian self-defense.

<span class="mw-page-title-main">Beretta Cheetah</span> Type of semi-automatic pistol

The Beretta Cheetah, also known by its original model name of "Series 81", or "80 Series", is a line of compact blowback operated semi-automatic pistols designed and manufactured by Beretta of Italy. They were introduced in 1976 and include models in .32 ACP, .380 ACP and .22 LR. Production paused in 2017, but Beretta revived the marque in 2023 with the release of the 80X.

<span class="mw-page-title-main">Beretta 21A Bobcat</span> Semi-automatic pistol

The Beretta 21A Bobcat is a semi-automatic pocket pistol designed by Beretta in Italy. Production began in the late 1984, solely in the Beretta U.S.A. facility in Accokeek, Maryland. It is a further development of the Beretta Model 20, whose production ended in 1985.

<span class="mw-page-title-main">CZ 75</span> Auto-loading pistol

The CZ 75 is a semi-automatic pistol made by Czech firearm manufacturer ČZUB. First introduced in 1975, it is one of the original "wonder nines" and features a staggered-column magazine, all-steel construction, and a hammer forged barrel. It is widely distributed throughout the world and is the most common handgun in the Czech Republic.

<span class="mw-page-title-main">Beretta 950</span> Pistol

The Beretta 950 is a semi-automatic pistol designed and manufactured by Beretta since 1952. It builds on a long line of small and compact pocket pistols manufactured by Beretta for self-defense. It was intended to be a very simple and reliable pocket pistol.

<span class="mw-page-title-main">Smith & Wesson Model 1006</span> Semi-automatic handgun

The Smith & Wesson Model 1006 is a recoil operated double-action/single-action semi-automatic handgun chambered in the 10mm Auto cartridge manufactured by Smith & Wesson.

<span class="mw-page-title-main">Bersa Thunder 380</span> Semi-automatic pistol

The Thunder 380 is a lightweight, relatively small semi-automatic pistol series chambered in the .380 ACP caliber made by Argentine firearms manufacturer Bersa, S.A.

<span class="mw-page-title-main">Smith & Wesson Model 469</span> Semi-automatic pistol

The Smith & Wesson Model 469 is a semi-automatic pistol, chambered for the 9mm cartridge.

<span class="mw-page-title-main">Bersa Thunder 9</span> Semi-automatic pistol

The Thunder 9 is a full-size semi-automatic handgun manufactured by Bersa at the Ramos Mejia production plant in Argentina. It is also sold under the name Firestorm or FS 9.

<span class="mw-page-title-main">Pocket pistol</span> Term for a small, pocket-sized semi-automatic pistol

In American English, a pocket pistol is any small, pocket-sized semi-automatic pistol, and is suitable for concealed carry in a pocket or a similar small space.

<span class="mw-page-title-main">Beretta 8000</span> Type of semi-automatic pistol

The Beretta 8000 (Cougar) is a family of rotating barrel semi-automatic pistols that were designed and manufactured by Beretta of Italy.

<span class="mw-page-title-main">Taurus PT92</span> Semi-automatic pistol

The Taurus PT92 is a double action/single action, double-stack-magazine fed, short recoil-operated, semi-automatic 9mm pistol manufactured by Taurus in the Beretta factory in São Paulo, Brazil.

<span class="mw-page-title-main">Colt Commander</span> Semi-automatic pistol

The Colt Commander is a single-action, semi-automatic, magazine-fed, and recoil-operated handgun based on the John M. Browning–designed M1911. It was the first mass-produced American pistol with an aluminium alloy frame and the first Colt pistol to be chambered in 9mm Parabellum.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

Llama Firearms, officially known as Llama-Gabilondo y Cia SA, was a Spanish arms company founded in 1904 under the name Gabilondo and Urresti. Its headquarters were in Eibar in the Basque Country, Spain, but they also had workshops during different times in Elgoibar and Vitoria. The company manufactured moderate-priced revolvers and self-chambering pistols in a wide variety of models. These were popular mainly in the European and Latin American export market, as well as domestically in Spain.

<span class="mw-page-title-main">Taurus Millennium series</span> Semi-automatic pistol

The Taurus Millennium series is a product line of double-action only (DAO) and single-action/double-action hammerless, striker-fired, short recoil operated, semi-automatic pistols manufactured by Forjas Taurus S/A in Porto Alegre Brazil. The Millennium line was designed to contend in the civilian concealed carry firearms market, and to be sold as backup weapons for law enforcement officers.

<span class="mw-page-title-main">CZ 2075 RAMI</span> Semi-automatic pistol

The CZ 2075 RAMI is a semi-automatic pistol made by Česká zbrojovka Uherský Brod (CZUB) in the Czech Republic. It features a staggered-column magazine, all-metal construction or optional Polyframe, and a hammer-forged floating barrel. The gun's name, RAMI, is derived from combining the first two letters of the designers' given names, Radek Hauerland and Milan Trkulja.

<span class="mw-page-title-main">SIG Sauer P938</span> Pistol

The SIG Sauer P938 is a micro-compact single-action pistol chambered for the 9×19mm Parabellum cartridge, manufactured by SIG Sauer and introduced at the 2011 SHOT Show. A variant chambered for .22 Long Rifle was introduced in 2014.

<span class="mw-page-title-main">Ruger SR1911</span> Semi-automatic pistol

The Ruger SR1911 is a semi-automatic pistol modeled after the classic Colt M1911 pistol.

<span class="mw-page-title-main">Bersa Thunder 32</span> Argentine semi-automatic pistol

The Bersa Thunder 32 is a lightweight, relatively small semi-automatic pistol chambered in .32 ACP caliber made by Argentine firearms manufacturer Bersa, S.A.

References

  1. 1 2 3 4 Glenn Barnes. "Ruger's P series: what's wrong with Ruger's P-series semiauto pistols? Not a darn thing, says the author". Guns Magazine. FindArticles.com. Retrieved 2009-11-03.
  2. 1 2 Ruger P series, Modern firearms.
  3. 1 2 P85 instruction manual Archived 2009-12-31 at the Wayback Machine . Retrieved 2009-11-03.
  4. 1 2 "An Official Journal of the NRA | Ruger P85". www.shootingillustrated.com. Retrieved 2017-06-26.
  5. 1 2 3 "An Official Journal of the NRA | Ruger P85".
  6. "U.S. Army Awards Sturm, Ruger & Co., Inc. Contract for 5,000 Pistols". December 23, 2004. Retrieved May 10, 2022.
  7. "GUN REVIEW: RUGER P95 SEMI-AUTO HANDGUN IN 9MM". Guns.com. Archived from the original on 14 June 2021. Retrieved 18 May 2022.
  8. 1 2 Ruger instruction manuals and product history. Retrieved 2009-11-03.
  9. "Ruger P-Series Owners Manual" (PDF). Ruger.
  10. "Ruger P-Series Owners Manual" (PDF). Ruger.
  11. Osbourne, Lawrence (29 October 1992). "San Diegans Who Cling to their Guns". San Diego Reader. Retrieved 27 January 2024.
  12. "Federal Bureau of Prisons Awards Sturm, Ruger & Co., Inc. 5-Year Contract". Ruger.com. 27 March 2008. Retrieved 27 January 2024.
  13. "How Ruger P95s and Sig P2022s got to Iraq". silahreport.com. 21 April 2017. Retrieved 27 January 2024.