Ruger Single-Six

Last updated
Ruger Single-Six
Ruger Single-Six, 2 generations.jpg
Ruger New Model Single-Six (stainless) on top and Ruger "Old Model" Single-Six (blued) on bottom.
Type Single action
Place of originUnited States
Production history
Designer Sturm, Ruger
Designed1953 (Old Model)
1973 (New Model)
Manufacturer Sturm, Ruger & Co.
Unit cost$534 [1] -754 [2] (MSRP)
Produced1953–1973 (Old Model)
1973–present (New Model)
No. builtOver 700,000 (Old Model) [3]
Over 1,057,000 (New Model, as of 1993) [4]
VariantsOld Model, New Model
Specifications
Mass32–40 oz (910–1,130 g) [5]
Length10.25–15 in (260–381 mm) [5]
Barrel  length4.625 in (117.5 mm)
5.5 in (140 mm)
6.5 in (170 mm)
9.5 in (240 mm)

Cartridge .22 LR, .22 WMR, .17 HMR, [6] .32 H&R Magnum
Barrels6-groove [5]
Action Single-action revolver
Feed system6-round cylinder [5]
SightsFixed or adjustable iron sights [5] (the Hunter model has provisions for mounting a scope) [6]

The Ruger Single-Six is a single-action rimfire revolver produced by Sturm, Ruger & Co. The Single-Six was first released in June 1953. [7]

Contents

The Single-Six is currently produced as the New Model Single-Six. The term "New Model" simply means that this model includes Ruger's transfer bar mechanism for increased safety, allowing one to carry the revolver safely with all six chambers loaded. Prior to 1973, the Single-Six was produced without the transfer bar mechanism, making it less safe to carry with all six chambers loaded, and with the hammer resting on a loaded chamber. The transfer bar safety allows the revolver to fire only when the trigger has been pulled. Ruger provides the transfer bar safety upgrade free of charge for owners of any old model Single-Six, [8] though this may come with a significant trigger-feel penalty. [9]

Specifications

Custom Long Barrel 45 Colt/45 ACP Blackhawk over Standard Ruger Single-Six 9.5 inch barrel Rugerlongconvertsml.jpg
Custom Long Barrel 45 Colt/45 ACP Blackhawk over Standard Ruger Single-Six 9.5 inch barrel

The New Model Single-Six is currently chambered in .22 LR, .22 WMR (.22 Magnum), and .17 HMR (initially offered with a second cylinder in .17 HM2 [10] ). Barrel lengths include 4+58 in (120 mm), 5+12 in (140 mm), 6+12 in (170 mm), 7+12 in (190 mm), and 9+12 in (240 mm), available in both blued and stainless steel.

Ruger manufactures several "convertible" models that ship with both a .22 LR cylinder and .22 WMR cylinder, allowing the use of both cartridges. [5] The .22 Short and .22 Long cartridges can also be fired in the Long Rifle cylinder. For those models that ship with both cylinders, the last 3 digits of the serial number are engraved on the front of the cylinder; only cylinders that have been properly timed should be used with any given revolver. The term Super Single-Six refers to those models which have fully adjustable target sights.

In 2011 Ruger introduced the Single-Ten and in 2012 they introduced the Single-Nine. Both of these revolvers are stainless steel variants of the Single-Six design with fiber optic sights. The Single-Ten is chambered in .22 Long Rifle, with ten chambers and a 5.5 inch barrel, whereas the Single-Nine is chambered in .22 Winchester Magnum Rimfire (.22 WMR), with nine chambers and a barrel length of 6.5 inches (170 mm).

Ruger Single-Ten 4.62 inch barrel Ruger-Single-Ten.jpg
Ruger Single-Ten 4.62 inch barrel

.32 centerfire models

From 1984 to 1997 Ruger chambered the New Model Single-Six in .32 H&R Magnum (which allows the use of .32 S&W and .32 S&W Long cartridges). Ruger reintroduced this caliber option in 2002, [11] and in September 2014 released the Single-Seven in .327 Federal Magnum as well, in a seven-shot stainless steel variant, with barrel lengths of 4.62 inches (117 mm), 5.5 inches (140 mm), and 7.5 inches (190 mm). [12] [13]

See also

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.

<span class="mw-page-title-main">Colt Single Action Army</span> Service revolver

The Colt Single Action Army is a single-action revolver handgun. It was designed for the U.S. government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company and was adopted as the standard-issued pistol of the U.S. Army from 1873 until 1892.

<span class="mw-page-title-main">Colt Anaconda</span> Revolver

The Colt Anaconda is a large frame double-action revolver featuring a full length under-barrel ejection-rod lug and six round cylinder, designed and produced by the Colt's Manufacturing Company in 1990. Chambered for the powerful .44 Magnum and .45 Colt centerfire ammunition cartridges, the Anaconda marked the Hartford, Connecticut firm's first foray into the popular large-bore Magnum pistol market.

<span class="mw-page-title-main">.410 bore</span> Shotgun bore designed by Charles Eley and William Eley

The .410 bore (10.4 mm) is one of the smallest caliber of shotgun shell commonly available. A .410 bore shotgun loaded with shot shells is well suited for small game hunting and pest control. The .410 started off in the United Kingdom as a garden gun along with the .360 and the No. 3 bore (9 mm) rimfire, No. 2 bore (7 mm) rimfire, and No. 1 bore (6 mm) rimfire. .410 shells have similar base dimensions to the .45 Colt cartridge, allowing many single-shot firearms, as well as derringers and revolvers chambered in that caliber, to fire .410 shot shells without any modifications.

<span class="mw-page-title-main">.22 Winchester Magnum Rimfire</span> Rimfire cartridge

The .22 Winchester Magnum Rimfire, also known as the .22 WMR, .22 Magnum, .22 WMRF, .22 MRF, or .22 Mag, is a rimfire cartridge. Originally loaded with a bullet weight of 40 grains (2.6 g) delivering velocities in the 2,000 feet per second (610 m/s) range from a rifle barrel, .22 WMR is now loaded with bullet weights ranging from 50 grains (3.2 g) at 1,530 feet per second (470 m/s) to 30 grains (1.9 g) at 2,200 feet per second (670 m/s).

<span class="mw-page-title-main">.17 HMR</span> Rifle cartridge

.17 Hornady Magnum Rimfire, commonly known as the .17 HMR, is a rimfire rifle cartridge developed by Hornady in 2002. It was developed by necking down a .22 Winchester Magnum Rimfire case to take a .17 caliber (4.5 mm) projectile. Commonly loaded with a 17 grain projectile, it can deliver muzzle velocities in excess of 775 m/s (2,650 ft/s).

<span class="mw-page-title-main">H&R Firearms</span> Firearms brand

Harrington and Richardson is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.

<span class="mw-page-title-main">Ruger Blackhawk</span> Revolver

The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.

<span class="mw-page-title-main">Ruger GP100</span> Revolver

The GP100 is a family/line of double action five-, six-, seven-, or ten-shot revolvers made by Sturm, Ruger & Co., manufactured in the United States. Since its introduction, it has been produced with a number of variations including various barrel lengths and profiles, fixed or adjustable sights, and in blued carbon steel or stainless steel.

<span class="mw-page-title-main">Ruger Super Redhawk</span> Revolver

The Super Redhawk is a line of double-action magnum revolvers made by Sturm, Ruger beginning in 1987, when Ruger started making weapons using larger, more powerful cartridges such as .44 Magnum, .454 Casull, and .480 Ruger.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Ruger SP101</span> Revolver

The Ruger SP101 is a series of double-action revolvers produced by the American company Sturm, Ruger & Co. The SP101 is a small frame and all-steel-construction carry revolver, with a five-shot ; six-shot ; or eight-shot cylinder.

<span class="mw-page-title-main">.327 Federal Magnum</span> US revolver cartridge

The .327 Federal Magnum is a cartridge introduced by Federal Premium Ammunition and also sold by Sturm, Ruger & Co. It is intended to provide the power of a .357 Magnum in six-shot, compact revolvers, whose cylinders would otherwise only hold five rounds. The .327 has also been used in full-sized revolvers with a capacity of seven rounds or more. The .327 Federal Mag is an example of a "super magnum", because it is a magnum of a magnum, the .32 H&R Magnum.

<span class="mw-page-title-main">Ruger Vaquero</span> Six-shot single-action revolver

The Ruger Vaquero is a six-shot single-action revolver manufactured by Sturm, Ruger & Co. based on the New Model Ruger Blackhawk frame and was introduced in 1993. It comes in blued steel, case colored, and a gloss stainless finish, all of which are available with wood, hard rubber, simulated ivory or black micarta grips and fixed sights. It arose with the popularity of Cowboy Action Shooting from which came demand for a single-action revolver that was more traditional in appearance.

<span class="mw-page-title-main">Ruger Security-Six</span> American revolver

The Ruger Security-Six and its variants, the Service-Six and Speed-Six are a product line of double-action revolvers introduced in 1972 and manufactured until 1988 by Sturm, Ruger & Co. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.

<span class="mw-page-title-main">Ruger LCR</span> Revolver

The Ruger LCR is a compact revolver built by Sturm, Ruger & Co. and announced in January 2009. LCR stands for "Lightweight Compact Revolver". It incorporates several novel features such as a polymer grip and trigger housing, monolithic receiver, and constant force trigger. At 13.5 oz (380 g), the LCR is nearly 50% lighter than the stainless steel SP101, as only the barrel and fluted cylinder are made of stainless steel.

<span class="mw-page-title-main">Freedom Arms</span> Freedom, Wyoming based firearm manufacturing company

Freedom Arms is a Freedom, Wyoming based firearm manufacturing company, known for producing powerful single-action revolvers. The company was founded in 1978 by Wayne Baker and Dick Casull to produce the Mini-Revolver, then later a revolver chambered in Casull's powerful .454 Casull revolver cartridge. This 5-shot revolver was the Model 83. Freedom Arms currently makes a single-shot pistol in addition to their revolvers.

The Ruger American Rifle is a family of budget-level hunting/sporting bolt-action centerfire rifle made by Sturm, Ruger & Co., which also produces a line of rimfire rifles with similar designs called the Ruger American Rimfire.

Ruger American Rimfire is a rimfire bolt-action rifle manufactured by Sturm, Ruger & Co. in the United States. The firearm has some visual similarities with the larger centerfire Ruger American Rifle, and both are marketed as budget hunting rifles.

<span class="mw-page-title-main">Ruger Wrangler</span> Revolver

The Ruger Wrangler is a single-action rimfire revolver produced by Sturm, Ruger & Co. Chambered for .22 Long Rifle cartridges, it was announced in April 2019. The revolver makes extensive use of aluminum and zinc castings for ease of manufacturability, and also has an unfluted cylinder and uses metal injection molded components for further cost reduction. The Wrangler's price point has been described as "very attractive", and is less than half the MSRP of Ruger's Single-Six and Bearcat models.

References