Ruger Old Army

Last updated
Ruger Old Army
Oldarmy.jpg
Type Revolver
Place of originUnited States
Production history
Manufacturer Sturm, Ruger & Co.
Produced1972–2008
Specifications
Barrel  length7.5" barrel

Cartridge Black Powder; Cap & Ball
Caliber .44
Action Single Action Revolver
Feed system6-shot Cylinder

The Ruger Old Army is a black-powder percussion revolver introduced in 1972 by the Sturm, Ruger company and manufactured through 2008. Models were made with a 7.5" and a 5.5 inch barrel. [1]

Contents

Design

The Ruger Old Army revolver is unusual in that, unlike most percussion revolvers on the market, it was not based on a historical design, but was a modification of Ruger's Blackhawk model, which was itself based upon the cartridge-firing Colt Peacemaker. [2] The Old Army revolver accordingly incorporates many modern design features, though employing antiquated black-powder component loading.

This design was built around the Blackhawk, but it takes its styling cues from the Spiller and Burr cap and ball pistol. This is due to the frame being longer in front to accommodate the loading lever and pivot pin. Earlier models listed as .44 caliber, later as .45, but all use a .457” round balls or .454” conical bullets of pure lead. [3] The Ruger Old Army can also shoot modern smokeless cartridges in .45 Colt (.45 Long Colt), or 45 ACP loaded for "cowboy action" muzzle velocities less than about 850 feet per second, via use of a drop-in conversion cylinder made by a number of manufacturers. [4]

Unlike the Blackhawk, the Old Army did not make use of Ruger's transfer bar safety; instead the revolver relied upon a series of safety notches between each chamber on the cylinder like some models of the remington/colt or other black powder revolvers of the mid-19th century had. [1]

The revolver was tested by loading each chamber to capacity with Bullseye smokeless powder and a lead ball. While this might result in catastrophic failure in other firearms, the Old Army proved to be strong enough to handle the pressure. [1]

Variants

The Old Army was made in blued steel and stainless steel. The first series of revolvers, made between 1972 and 1981 (with serial numbers 140-000000 to 140-46841) were all blued. Beginning in 1982, stainless versions were produced as well, beginning with serial number 145-00000. [5] Originally fitted with adjustable sights, fixed-sight models were first offered in 1994. A 5-½ inch barrel was introduced in 2002. Some versions were sold with polymer ivory grips. [6] Barrels of Ruger Old Army revolvers made in 1976 were marked "MADE IN THE 200TH YEAR OF AMERICAN LIBERTY." [7]

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters or sixguns. Due to their rotating cylinder mechanism, they may also be called wheel guns.

<span class="mw-page-title-main">Colt Single Action Army</span> Service revolver

The Colt Single Action Army is a single-action revolver handgun. It was designed for the U.S. government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company and was adopted as the standard-issued pistol of the U.S. Army from 1873 to 1892.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 19 years, before being replaced by the .38 Long Colt in 1892.

<span class="mw-page-title-main">.32 S&W Long</span> American handgun cartridge

The .32 S&W Long / 7.65x23mmR, is a straight-walled, centerfire, rimmed handgun cartridge, based on the earlier .32 S&W cartridge. It was introduced in 1896 for Smith & Wesson's first-model Hand Ejector revolver. Colt called it the .32 Colt New Police in revolvers it made chambered for the cartridge.

A. Uberti, Srl., is an Italian manufacturer of high quality replicas of 19th century American percussion revolvers, carbines, and rifles as well as cartridge revolvers, single-shot rifles, and lever-action rifles. These replicas are commonly used by historical re-enactors, participants in action shooting sports such as cowboy action shooting, working ranchers and target shooters who prefer traditional-style firearms. Thanks to their quality, Uberti replicas are also sought after by collectors and historical firearm enthusiasts.

<span class="mw-page-title-main">LeMat Revolver</span> Grapeshot revolver/service pistol

The LeMat revolver was a .42 or .36 caliber cap & ball black powder revolver invented by Jean Alexandre LeMat of France, which featured an unusual secondary 16 to 20 gauge smooth-bore barrel capable of firing buckshot. It saw service with the armed forces of the Confederate States of America during the American Civil War of 1861–1865 and the Army of the Government of National Defense during the Franco-Prussian War.

<span class="mw-page-title-main">Ruger Blackhawk</span> Revolver

The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 3 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Remington Model 1858</span> Revolver

The Remington-Beals Model Revolvers along with subsequent models and variations were percussion revolvers manufactured by Eliphalet Remington & Sons in .31 (Pocket) .36 (Navy) or .44 (Army) caliber, used during the American Civil War, and was the beginning of a successful line of medium and large frame pistols. They are commonly, though inaccurately, referred to as the Model 1858 due to the patent markings on its New Model barrels, "PATENTED SEPT. 14, 1858/E. REMINGTON & SONS, ILION, NEW YORK, U.S.A./NEW MODEL."; although wide scale production did not start until 1861.

<span class="mw-page-title-main">Antique firearms</span> Firearms older than 20th century

An antique firearm is a term used to describe a firearm that was designed and manufactured prior to the beginning of the 20th century. Although the exact definition of what constitutes an "antique firearm" varies between countries, the advent of smokeless powder or the start of the Boer War are often used as cut-off dates. Antique firearms are usually collected because of their historical interest and/or their monetary value.

<span class="mw-page-title-main">Handgun</span> Short-barreled firearm designed to be held and used with one hand

A handgun is a firearm designed to be usable with only one hand. It is distinguished from a long gun which needs to be held by both hands and braced against the shoulder. Handguns have shorter effective ranges compared to long guns, and are much harder to shoot accurately. While most early handguns are single-shot pistols, the two most common types of handguns used in modern times are revolvers and semi-automatic pistols, although other handguns such as derringers and machine pistols also see infrequent usage.

<span class="mw-page-title-main">Cylinder (firearms)</span> Cylindrical revolver part that holds rounds

In firearms, the cylinder is the cylindrical, rotating part of a revolver containing multiple chambers, each of which is capable of holding a single cartridge. The cylinder rotates (revolves) around a central axis in the revolver's action to sequentially align each individual chamber with the barrel bore for repeated firing. Each time the gun is cocked, the cylinder indexes by one chamber. Serving the same function as a rotary magazine, the cylinder stores ammunitions within the revolver and allows it to fire multiple times before needing to reload.

<span class="mw-page-title-main">Ruger Vaquero</span> Six-shot single-action revolver

The Ruger Vaquero is a six-shot single-action revolver manufactured by Sturm, Ruger & Co. based on the New Model Ruger Blackhawk frame and was introduced in 1993. It comes in blued steel, case colored, and a gloss stainless finish, all of which are available with wood, hard rubber, simulated ivory or black micarta grips and fixed sights. It arose with the popularity of Cowboy Action Shooting from which came demand for a single-action revolver that was more traditional in appearance.

<span class="mw-page-title-main">Colt Walker</span> Revolver

The Colt Walker, sometimes known as the Walker Colt, is a single-action revolver with a revolving cylinder holding six charges of black powder behind six bullets. It was designed in 1846 by American firearms inventor Samuel Colt to the specifications of Captain Samuel Hamilton Walker.

Chiappa Firearms, Armi Sport di Chiappa, is an Italian firearms manufacturing company based in Brescia. It was founded in 1958 by Ezechiele Chiappa as Armi Sport. Total unit production is around 60,000 per year. Its U.S. headquarters are in Dayton, Ohio.

<span class="mw-page-title-main">Colt M1877</span> Early double-action revolver

The Colt M1877 was a double-action revolver manufactured by Colt's Patent Fire Arms from January 1877 until 1909 for a total of 166,849 revolvers. The Model 1877 was offered in three calibers, which lent them three unofficial names: the "Thunderer", the "Lightning", and the "Rainmaker". The principal difference between the models was the cartridge in which they were chambered for, these are the "Thunderer" in .41 Long Colt; the "Lightning" in .38 Long Colt; and the "Rainmaker" in .32 Long Colt. All of the models had a six-round capacity.

<span class="mw-page-title-main">Remington Model 1875</span> Revolver

Remington Model 1875 Single Action Army was a revolver by E. Remington & Sons. It was based upon the successful New Model Army with both revolvers having the same size, appearance, and the removable cylinder. The new 1875 Remington differed mainly from the older 1858 percussion model by having a bored through cylinder chambered for metallic cartridges. Thus, in 1875, Remington entered the cartridge revolver market with this big-frame, army style revolver, intended to compete with the Colt Peacemaker. Ordinary citizens and Old West lawmen alike recognized the sturdy quality of the new Remington revolvers. This design was followed by the Model 1888 and the Model 1890.

<span class="mw-page-title-main">Colt Model 1871–72 Open Top</span> Revolver

The Colt Model 1871–72 Open Top is a metallic cartridge rear-loading .44-caliber revolver introduced in 1872 by the Colt's Patent Fire Arms Manufacturing Company. This handgun was developed following two patents, the first one in 1871 and the second one in 1872, it is estimated that the production span lies primarily between February 1872 and June 1873. There is therefore still some confusion when naming it. It is sometimes named Colt Model 1871 or Colt Model 1872 but at this time the most common accepted names are Colt Model 1871–72 Open Top, Colt Model 1871–72 or simply Colt Open Top.

<span class="mw-page-title-main">Remington Model 1890</span> Revolver

The Remington Model 1890 New Model Army was a revolver by Remington Arms. It was based on the successful Remington Model 1875 and the lesser known Model 1888 with both revolvers having the same size, appearance, and the removable cylinder. The 1890 Remington single-actions kept the solid frame and similar styling of the 1875 model, but lacking the large web under the ejector rod housing and equipped with checkered rubber grips. Like the 1875 model, the 1890 was suitably made for metallic cartridges, but only issued in .44-40 caliber.

Cimarron Firearms is an American firearms importer that has been in operation since 1984. The company's field of specialty is reproduction firearms from the American Civil War to the end of the Old West period. Founded by Mike Harvey in Houston, Texas, the company is now based in Fredericksburg, Texas.

References

  1. 1 2 3 Taffin, John (2005). Single Action Sixguns. Vol. The Ruger Old Army. Iola, Wisconsin: Krause Publications. pp. 150–151. ISBN   0-87349-953-0.
  2. Cumpston, Mike (July 2005). Percussion Pistols and Revolvers: History, Performance and Practical Use. iUniverse. pp. 147–148. ISBN   978-0-595-35796-3.
  3. Sweeney, Patrick (2007). The Gun Digest Book of Ruger Pistols and Revolvers. Iola, Wisconsin: Gun Digest Books. pp. 218–222. ISBN   978-0-89689-472-3.
  4. Adler, Dennis (2008). Black Powder Revolvers--Reproductions and Replicas. Minneapolis, Minnesota: Blue Book Publications. p. 201-203. ISBN   1-886768-82-X.
  5. Adler, Dennis (2008). Black Powder Revolvers--Reproductions and Replicas. Minneapolis, Minnesota: Blue Book Publications. p. 57. ISBN   1-886768-82-X.
  6. Fadala, Sam (2003). The Gun Digest Blackpowder Loading Manual. Iola, Wisconsin: Krause Publications Craft. p. 141. ISBN   0-87349-574-8.
  7. Adler, Dennis (2008). Black Powder Revolvers--Reproductions and Replicas. Minneapolis, Minnesota: Blue Book Publications. p. 59. ISBN   1-886768-82-X.