Ruger No. 3

Last updated
Ruger No. 3
TypeSingle-shot rifle
Place of originUnited States
Production history
Designer William B. Ruger
Manufacturer Sturm, Ruger & Co., Inc.
Unit cost$165 (1973) [1]
Produced1973–1986 [1] [2]
No. builtOver 30,000 [1]
Variants Viper simulator [1]
Specifications
Mass6 lb (2.7 kg) (.45-70 variant) [1]
Length38.5 in (980 mm) [1]
Barrel  length22 in (560 mm) [1]

Cartridge Various (See Article)
Action Farquharson-style hammerless falling block
Sightsnone, or open sights

The Ruger No. 3 is a single-shot rifle produced by Sturm, Ruger & Co from 1973 to 1986. It is based on the No. 1, with some modifications made to reduce costs, such as a simpler one-piece breech lever. [3] It also was shipped with an uncheckered stock and a plastic buttplate. [4] It has been described as "superbly accurate". [5]

Approximately 1400 No. 3 actions were installed into FGR-17 Viper antitank rocket launcher tubes and used for sub-caliber training. [1]

The No. 3 was chambered for .22 Hornet, .223 Remington, .30-40 Krag, .375 Winchester, .44 Magnum, and .45-70. [1] [2]

Related Research Articles

<span class="mw-page-title-main">Ruger Mini-14</span> Semi-automatic rifle

The Mini-14 is a lightweight semi-automatic rifle manufactured by Sturm, Ruger & Co. Introduced in 1973, the design was outwardly based on the M14 rifle and is, in appearance, a scaled-down version chambered in 5.56×45mm NATO, though with its own gas system design.

Sturm, Ruger & Company, Inc., better known by the shortened name Ruger, is an American firearm manufacturing company based in Southport, Connecticut, with production facilities also in Newport, New Hampshire; Mayodan, North Carolina; and Prescott, Arizona. The company was founded in 1949 by Alexander McCormick Sturm and William B. Ruger and has been publicly traded since 1969.

The Ruger 10/22 is a series of semi-automatic rifles produced by American firearm manufacturer Sturm, Ruger & Co., chambered for the .22 Long Rifle rimfire cartridge. It uses a patented 10-round rotary magazine, though higher capacity box magazines are also available. The standard carbine version of the Ruger 10/22 has been in production continuously since 1964, making it one of the most successful rimfire rifle designs in history, with numerous third party manufacturers making parts and accessories for upgrading and customization. The 10/22's aftermarket is so prolific that a complete 10/22 can be built without using any Ruger-made components.

<span class="mw-page-title-main">William B. Ruger</span> American inventor (1916–2002)

William Batterman Ruger was an American firearms designer and entrepreneur, who partnered with Alexander McCormick Sturm to establish Sturm, Ruger & Company in 1949. Their first product was the Ruger Standard, the most popular .22 caliber target pistol ever made in the United States. After Sturm’s death in 1951, and under Ruger’s continued leadership, the company produced one of the widest varieties of firearms of any manufacturer in the world.

<span class="mw-page-title-main">Ruger GP100</span> Revolver

The GP100 is a family/line of double action five-, six-, seven-, or ten-shot revolvers made by Sturm, Ruger & Co., manufactured in the United States. Since its introduction, it has been produced with a number of variations including various barrel lengths and profiles, fixed or adjustable sights, and in blued carbon steel or stainless steel.

<span class="mw-page-title-main">Ruger Model 77 rotary magazine</span> Bolt-action rifle

The Ruger 77/22 is a bolt-action rimfire rifle chambered for the .22 Long Rifle, .22 WMR, or .22 Hornet. It has a removable rotary magazine which allows the magazine to fit flush with the bottom of the stock. The 77/22 was introduced in 1983 and was based on the centerfire Model 77 Mark II. Each rifle comes with scope rings and a lock.

<span class="mw-page-title-main">Ruger No. 1</span> Falling Block Rifle

The Ruger No. 1 is a single-shot rifle with a Farquharson-style hammerless falling-block action, introduced and manufactured by Sturm, Ruger & Co. since 1967. An underlever lowers the breechblock to allow ammunition loading and also cocks the rifle. Lenard Brownell, commenting on his work at Ruger, said of the No. 1: "There was never any question about the strength of the action. I remember, in testing it, how much trouble I had trying to tear it up. In fact, I never did manage to blow one apart."

<span class="mw-page-title-main">Ruger Single-Six</span> Single action

The Ruger Single-Six is a single-action rimfire revolver produced by Sturm, Ruger & Co. The Single-Six was first released in June 1953.

<span class="mw-page-title-main">.327 Federal Magnum</span> US revolver cartridge

The .327 Federal Magnum is a cartridge introduced by Federal Premium Ammunition and also sold by Sturm, Ruger & Co. It is intended to provide the power of a .357 Magnum in six-shot, compact revolvers, whose cylinders would otherwise only hold five rounds. The .327 has also been used in full-sized revolvers with a capacity of seven rounds or more. The .327 Federal Mag is an example of a "super magnum", because it is a magnum of a magnum, the .32 H&R Magnum.

<span class="mw-page-title-main">Ruger M77</span> Rifle

The Ruger M77 is a bolt-action rifle produced by Sturm, Ruger & Co. It was designed by Jim Sullivan during his three years with Ruger. It was designed primarily as a hunting rifle featuring a traditional Mauser K98-style two-lugged bolt with a claw extractor.

<span class="mw-page-title-main">Ruger Standard</span> Semi-automatic pistol

The Ruger Standard Model is a rimfire semi-automatic pistol introduced in 1949 as the first product manufactured by Sturm, Ruger & Co., and was the founding member of a product line of .22 Long Rifle cartridge handguns, including its later iterations: the MK II, MK III, and MK IV. It is marketed as an inexpensive .22 caliber rimfire intended for casual sport and target shooting, and plinking. Designed by company founder William B. Ruger, the Standard model and its offspring went on to become the most accepted and successful .22 caliber semi-automatic pistols ever produced.

<span class="mw-page-title-main">Ruger Hawkeye</span> Single-shot pistol

The Ruger Hawkeye is a single-shot pistol chambered for the .256 Winchester Magnum cartridge, produced by Sturm, Ruger & Co. from 1963 until July 1964. It was built on the same frame as the Ruger Blackhawk, but rather than having a rotating cylinder like a standard revolver, it featured a swiveling breechblock which allowed an individual round to be loaded and sealed into the frame.

The SR-556 is a semi-automatic AR-15 style rifle manufactured by Sturm, Ruger & Co. The rifle was introduced in 2009 in .223 Remington/5.56×45mm NATO and as a .308 Winchester AR-10 variant in 2013, the SR-762. It is one of several AR-15 rifles to use a gas piston operation.

The Ruger American Rifle is a family of budget-level hunting/sporting bolt-action centerfire rifle made by Sturm, Ruger & Co., which also produces a line of rimfire rifles with similar designs called the Ruger American Rimfire.

<span class="mw-page-title-main">Ruger Model 96</span> Lever-action rifle

The Ruger Model 96 is a series of lever-action rifles produced by Sturm, Ruger & Co. They featured a short-throw lever action, cross button safety and a visible cocking lever. The 4 different variants of the Model 96 represented the four calibers the rifle came in: 96/17 for .17 HMR, 96/22 for .22 LR, 96/22M for .22 Magnum and 96/44 for .44 Magnum. All four models had a hardwood stock.

<span class="mw-page-title-main">Ruger Bearcat</span> Single-action revolver

The Ruger Bearcat is a single-action, .22 caliber revolver manufactured by Sturm, Ruger & Co., introduced in 1958. It is based on the classic Remington single-action revolvers of the mid-19th century. Because of its compact size and frame, it is advertised as being ideal for hikers or campers in need of a .22 LR revolver, or "kit gun".

<span class="mw-page-title-main">Ruger Deerfield Carbine</span> Centerfire semi-automatic rifle

The Deerfield Carbine or Model 99/44 is a .44 Magnum semi-automatic rifle produced by Sturm, Ruger & Co. It uses a rotating-bolt short-stroke gas-piston. It was introduced in 2000 and discontinued in 2006.

The Ruger Model 44 is a semi-automatic rifle chambered in .44 Remington Magnum designed and manufactured by American firearm company Sturm, Ruger & Co. It uses a 4-round tubular magazine and was produced from 1961 to 1985.

<span class="mw-page-title-main">Ruger AR-556</span> Semi-automatic rifle

The Ruger AR-556 is a semiautomatic AR-15 style rifle manufactured by U.S. firearms company Sturm, Ruger & Co. Introduced in 2014 as an entry-level AR-15 using a direct impingement action, with variants since being released such as the upgraded AR-556 MPR in 2017 and the AR-556 pistol in 2019.

The Ruger Precision Rifle (RPR) is a bolt-action rifle introduced by Sturm, Ruger & Co. on 17 July 2015.

References

  1. 1 2 3 4 5 6 7 8 9 Wilson, R. L. (1996). Ruger & His Guns: A History of the Man, the Company, and Their Firearms. New York: Simon & Schuster. pp. 92–93. ISBN   0-684-80367-4. OCLC   33820244.
  2. 1 2 "Ruger No.3 Serial Number History".
  3. Walter, John (2006). Rifles of the World. Iola, WI: Krause Publications. p. 409. ISBN   0-89689-241-7. OCLC   67543348.
  4. "An Old Friend: The Ruger No. 3 Rifle". American Rifleman. 2019-09-03. Retrieved 2020-05-01.
  5. Tappan, Mel (1981). Tappan on Survival. Rogue River, OR Aurora, IL: Janus Press Distributed by Caroline House. ISBN   0-916172-04-X. OCLC   8512636.