Ruger Vaquero

Last updated
Ruger Vaquero
RugerVaqueros.jpg
Two Ruger Vaqueroes in Stainless Steel
Type Revolver
Place of originUnited States
Production history
DesignerBill Ruger Sr.
Designed1993 [1]
Manufacturer Sturm, Ruger
Produced1993–present
No. built650,000 [2] [3]
VariantsConvertible, Montado, Bisley
Specifications
Mass36–48 oz (1,000–1,400 g) [1]
Length9.5–13 in (240–330 mm) [1]
Barrel  length3.75 in (95 mm),
4.62 in (117 mm),
5.5 in (140 mm),
7.5 in (190 mm) [1]
Caliber
Action Single-action revolver [1]
Feed system6-round cylinder
SightsFixed

The Ruger Vaquero is a six-shot single-action revolver manufactured by Sturm, Ruger & Co. based on the New Model Ruger Blackhawk frame and was introduced in 1993. It comes in blued steel, case colored, and a gloss stainless finish (the latter gloss stainless finish is intended to resemble closely a 19th-century nickel-plated finish), all of which are available with wood, hard rubber, simulated ivory or black micarta grips and fixed sights. It arose with the popularity of Cowboy Action Shooting from which came demand for a single-action revolver that was more traditional in appearance. [4]

Contents

Design details

The Ruger Vaquero is a New Model Blackhawk with fixed sights consisting of a front blade and a notch milled into the frame at the rear. The first version was a 7+1⁄2 in (190 mm) barrelled revolver chambered in .45 Colt with a simulated color case-hardened frame and a blue barrel, grip frame, and cylinder. This was followed by models with a 5+1⁄2 in (140 mm) barrel and a 4+5⁄8 in (120 mm) barrel based on the other common barrel lengths of the Colt SAA. The three versions were offered in stainless steel and other calibers including .44 Magnum, .357 Magnum, and .44-40 Winchester. Originally all Ruger Vaqueros were shipped with walnut grips incorporating a Ruger logo in a medallion. [4] In 1998 some models began shipping with a faux-ivory grip and limited runs with gold inlay and engraving were offered.

Like the New Model Blackhawk the Vaquero does not require the hammer to be half-cocked for loading and unloading, and uses a transfer bar mechanism which prevents the cartridge under the hammer from being fired without the trigger being pulled. [4]

The "New Model Vaquero" comes with checkered black plastic grips, which look similar to the checkered black rubber grips Colt used in the late 19th century. Ruger placed the safety warning which used to appear on the left-side of the barrel beneath the barrel on these models to make the gun more aesthetically pleasing. [5]

Variants

Two major variants of Vaqueros exist. The original Vaquero was marketed from 1993 until 2005, and was slightly larger than the Colt Single Action Army. The New Vaquero, produced from 2005 to the present is closer to the dimensions of the Colt Single Action Army. [6] Unlike original Single Action Army revolvers, both versions are safe to load all six chambers of the cylinder, having a transfer bar design; additionally, both variants permit reloading by simply opening the loading gate, thereby freeing the cylinder to rotate freely, without pulling the hammer into the half-cock notch. These initial Vaqueros have only two hammer positions: fully down, and fully cocked.

The original Vaquero was built to safely fire higher pressure 45 Colt ammunition than the Black powder chamberings, having significantly thicker cylinder walls than other revolvers. Many reloading manuals contain Ruger-only recommended handloads that are considered unsafe for use in other than Thompson/Center pistols, Ruger Blackhawk revolvers, Ruger Redhawk revolvers, and Ruger Vaquero revolvers. Ruger New Vaquero model revolvers, having thinner cylinder walls, are not considered safe for use with the Ruger-only loads taken from the older editions of these manuals. Ruger states that the "New Model Vaquero" will handle +P and +P+ ammunition without any issues, but warns users not to shoot reloads in any of their guns as it will void the warranty. [4]

Three grip variants exist for Vaqueros. The standard grip is very similar to the grip on the original Single Action Army revolver. The Bisley variant incorporates the target grip that was incorporated on the Bisley variant of the Single Action Army revolver that was intended for target shooting. The Bisley grip is also better suited for users with larger hands, having a longer frame that better fits larger hands. Users with smaller hands may not find the trigger to be comfortable to shoot on Bisley variants, by reason of not being able to place their trigger finger properly on the trigger, the trigger being located farther from the grip. The third variant is the Birdshead grip, similar to the pattern found on the Colt M1877 and M1878 models. [4]

In 1999 a limited run of 500 guns in stainless steel and 500 guns in blue with color case hardened frames were offered by Davidson's with a 3+3⁄4 in (95 mm) barrel and a shortened ejector rod and housing. These were called the "Sheriff's Model". In 2005, this barrel was added as a standard option to the catalog. [4]

History

The Vaquero was introduced in 1993 to meet the growing demand for quality modern firearms used in the growing sport of cowboy action shooting. [7]

In 2005, Ruger introduced the "New Vaquero" which incorporated a smaller frame, based on Ruger's XR-3 grip frame, making the pistol closer to the size of the Colt Single Action Army Revolver of 1873. The New Vaquero will accept two-piece stocks made for the Colt Single Action Army. [6]

Calibers

The Firearms Distributor known as Davidson's offered three exclusive chamberings of the Vaquero with convertible cylinders:

San Diego Sheriff's Association .40 S&W model

In 2000, the San Diego Sheriff's Association ordered a Commemorative Edition Vaquero chambered in .40 S&W (the caliber of the SDSA's service weapon), to celebrate the agency's 150th anniversary. Approximately 1,000 models were produced, most of which were sold to SDSA members embossed with their logo on the barrel. Around 125 were overruns and sold lacking such markings; particularly sought after by collectors are 25-30 of said overruns in which the user warning traditionally stamped on the left side of the barrel was instead stamped on the underside of the barrel. [8]

Related Research Articles

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters.

<span class="mw-page-title-main">Colt Single Action Army</span> Service revolver

The Colt Single Action Army is a single-action revolver handgun. It was designed for the U.S. government service revolver trials of 1872 by Colt's Patent Firearms Manufacturing Company and was adopted as the standard-issued pistol of the U.S. Army from 1873 until 1892.

<span class="mw-page-title-main">Colt Python</span> Revolver

The Colt Python is a double action revolver chambered for the .357 Magnum cartridge. It was first introduced in 1955 by the Colt's Manufacturing Company.

<span class="mw-page-title-main">.45 Colt</span> Revolver cartridge designed by the U.S. Army

The .45 Colt (11.43×33mmR), is a rimmed, straight-walled, handgun cartridge dating to 1872. It was originally a black-powder revolver round developed for the Colt Single Action Army revolver. This cartridge was adopted by the U.S. Army in 1873 and served as an official US military handgun cartridge for 19 years, before being replaced by the .38 Long Colt in 1892.

<span class="mw-page-title-main">Colt Anaconda</span> Revolver

The Colt Anaconda is a large frame double-action revolver featuring a full length under-barrel ejection-rod lug and six round cylinder, designed and produced by the Colt's Manufacturing Company in 1990. Chambered for the powerful .44 Magnum and .45 Colt centerfire ammunition cartridges, the Anaconda marked the Hartford, Connecticut firm's first foray into the popular large-bore Magnum pistol market.

<span class="mw-page-title-main">.44 Magnum</span> Revolver cartridge designed by Elmer Keith and Smith & Wesson (S&W)

The .44 Remington Magnum, also known as .44 Magnum or 10.9x33mmR, is a rimmed, large-bore cartridge originally designed for revolvers and quickly adopted for carbines and rifles. Despite the ".44" designation, guns chambered for the .44 Magnum round, its parent case, the .44 Special, and its parent case, the .44 Russian all use 0.429 in (10.9 mm) diameter bullets. The .44 Magnum is based on the .44 Special case but lengthened and loaded to higher pressures for greater velocity and energy.

<span class="mw-page-title-main">Smith & Wesson Model 27</span> Revolver

The Smith & Wesson Model 27 is a six-shot, double-action revolver chambered for the .357 Magnum cartridge and manufactured by the United States company Smith & Wesson. It was first produced in 1935, and many versions of it are still in production today. The Model 27 was built on S&W's carbon steel, large N-frame, had adjustable sights, and was available at various times with 31⁄2", 4", 5", 6", 61⁄2", 83⁄8", 83⁄4", or 105⁄8" barrel lengths.

<span class="mw-page-title-main">Ruger Blackhawk</span> Revolver

The Ruger Blackhawk is a six-shot, single-action revolver manufactured by Sturm, Ruger & Co. It is produced in a variety of finishes, calibers, and barrel lengths.

<span class="mw-page-title-main">Ruger GP100</span> Revolver

The GP100 is a family/line of double action five-, six-, seven-, or ten-shot revolvers made by Sturm, Ruger & Co., manufactured in the United States. Since its introduction, it has been produced with a number of variations including various barrel lengths and profiles, fixed or adjustable sights, and in blued carbon steel or stainless steel.

<span class="mw-page-title-main">Ruger Super Redhawk</span> Revolver

The Super Redhawk is a line of double-action magnum revolvers made by Sturm, Ruger beginning in 1987, when Ruger started making weapons using larger, more powerful cartridges such as .44 Magnum, .454 Casull, and .480 Ruger.

<span class="mw-page-title-main">Snubnosed revolver</span> Type of gun

A snubnosed revolver is a small, medium, or large frame revolver with a short barrel, generally less than 4 inches in length. Smaller such revolvers are often made with "bobbed" or "shrouded" hammers and there are also "hammerless" models ; the point is to allow the gun to be drawn with little risk of it snagging on clothing. Since the external movement of the mechanism is minimal or nil, shrouded and hammerless models may be fired from within clothing. The design of these revolvers compromises range and accuracy at a distance in favor of maneuverability and ease of carry and concealment.

<span class="mw-page-title-main">Ruger Redhawk</span> Revolver

The Ruger Redhawk is a DA/SA, large-frame revolver introduced in 1979 by Sturm, Ruger & Company.

<span class="mw-page-title-main">Ruger Single-Six</span> Single action

The Ruger Single-Six is a single-action rimfire revolver produced by Sturm, Ruger & Co. The Single-Six was first released in June 1953.

The Beretta Stampede is a single-action revolver manufactured by Beretta that is a close clone of the Colt Single Action Army "Peacemaker". The main difference is that the Beretta utilizes a transfer bar like the Ruger Vaquero which makes the gun safe to carry a full 6 rounds.

<span class="mw-page-title-main">Colt New Service</span> Revolver

The Colt New Service is a large frame, large caliber, double-action revolver made by Colt from 1898 until 1941. Made in various calibers, the .45 Colt version with a 5½" barrel, was adopted by the U.S. Armed Forces as the Model 1909.

<span class="mw-page-title-main">Ruger Security-Six</span> American revolver

The Ruger Security-Six and its variants, the Service-Six and Speed-Six are a product line of double-action revolvers introduced in 1972 and manufactured until 1988 by Sturm, Ruger & Co. These revolvers were marketed to law enforcement duty issue, military, and civilian self-defense markets.

<span class="mw-page-title-main">Ruger LCR</span> Revolver

The Ruger LCR is a compact revolver built by Sturm, Ruger & Co. and announced in January 2009. LCR stands for "Lightweight Compact Revolver". It incorporates several novel features such as a polymer grip and trigger housing, monolithic receiver, and constant force trigger. At 13.5 oz (380 g), the LCR is nearly 50% lighter than the stainless steel SP101, as only the barrel and fluted cylinder are made of stainless steel.

<span class="mw-page-title-main">Freedom Arms</span>

Freedom Arms is a Freedom, Wyoming based firearm manufacturing company, known for producing powerful single-action revolvers. The company was founded in 1978 by Wayne Baker and Dick Casull to produce the Mini-Revolver, then later a revolver chambered in Casull's powerful .454 Casull revolver cartridge. This 5-shot revolver was the Model 83. Freedom Arms currently makes a single-shot pistol in addition to their revolvers.

<span class="mw-page-title-main">Ruger Old Army</span> Revolver

The Ruger Old Army is a black-powder percussion revolver introduced in 1972 by the Sturm, Ruger company and manufactured through 2008. Models were made with a 7.5" and a 5.5 inch barrel.

<span class="mw-page-title-main">Dick Casull</span>

Richard J. Casull was a Salt Lake City-born gunsmith and wildcat cartridge developer whose experiments with .45 Colt ammunition in the 1950s led to the creation of the .454 Casull cartridge. Casull's passion was six-shooters, and he was determined to create a high velocity round for the .45 Colt. His goal was to achieve a muzzle velocity of 2,000 feet per second with Colt .45 rounds fired from a single-action Army-style revolver with a 7+1⁄2inch barrel. This proved impossible due to the tensile strength of the Colt .45 cylinder, so he set out to develop his own casing and bullet.

References

  1. 1 2 3 4 5 6 Peterson, Philip. Gun Digest Book of Modern Gun Values: The Shooter's Guide to Guns 1900 to Present (16th ed.). p. 243.
  2. ↑ "Ruger Vaquero Serial Number History".
  3. ↑ "Ruger New Vaquero Serial Number History".
  4. 1 2 3 4 5 6 Taffin, John (12 October 2005). Single Action Sixguns. Iola, Wisconsin: Krause Publications. pp. 227, 336. ISBN   0-87349-953-0.[ permanent dead link ]
  5. ↑ Chicoine, David (10 June 2005). Guns of the New West: A Close Up Look at Modern Replica Firearms. Iola, Wisconsin: Krause Publications. pp. 125–126. ISBN   0-87349-768-6.
  6. 1 2 Taffin, John (2005). "Ruger's New Vaqueros: Slim, Trim and Spirited". American Handgunner (3).
  7. ↑ Taffin, John (2005). The Gun Digest Book of Cowboy Action Shooting: Guns · Gear · Tactics. Gun Digest Books. p. 256. ISBN   978-0-89689-140-1.
  8. ↑ Fjestad, S. P. (30 April 2006). Blue Book of Gun Values. Blue Book Publications. p. 556. ISBN   978-1-886768-62-8.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.