M2 Hyde

Last updated
U.S. Submachine gun, Caliber .45, M2 [1]
USM2smg.png
M2 Hyde SMG
Type Submachine Gun
Place of originUnited States
Service history
Wars World War II
Production history
Designer George Hyde, [1] [2] Frederick Sampson [2]
Manufacturer Marlin Firearms
Produced1942–1943
Specifications
Mass9 lb 4 0z (4.19 kg) [3]
Length32 in. (813 mm) [3]
Barrel  length12 in. (305 mm) [3]

Caliber .45 ACP [3]
Action Blowback
Rate of fire 570 rounds per minute [3]
Muzzle velocity 960 ft/s (292 m/s)
Feed system20 or 30-round Thompson submachine gun box magazines

The Hyde-Inland M2 was a United States submachine gun design submitted for trials at Aberdeen Proving Ground in February 1941. Work was undertaken by General Motors Inland Manufacturing Division to develop workable prototypes of George Hyde's design patented in 1935 ( U.S. Patent 2049776A ). The model first submitted for trials in April 1942 was designated the Hyde-Inland 1. Trials revealed the design was superior to the M1 submachine gun in mud and dirt tests, and its accuracy in full-automatic firing was better than any other submachine gun tested at the time. An improved Hyde-Inland 2 was designated U.S. Submachine gun, Caliber .45, M2 as a substitute standard for the M1 Thompson in April 1942. As Inland's manufacturing capacity became focused on M1 carbine production, the US Army contracted M2 production to Marlin Firearms in July 1942. Marlin began production in May 1943. Marlin's production failed to match the trials prototype performance; [3] and Marlin's original contract for 164,450 M2s was canceled in 1943 upon adoption of the M3 submachine gun. [4] The M2 is chambered for the .45 ACP cartridge and used the same 20- or 30-round magazine as the Thompson. Its cyclic rate of fire is 570 rounds per minute. None of the approximately 400 manufactured were issued by any branches of the United States military. [3]

Contents

Design

The M2 is a simple blowback operated design, although it was difficult to make. The receiver was built from a steel forging and a seamless tubular section, which took extra time and effort to machine and finish, causing the US Army to adopt the M3 with a simple stamped sheet metal receiver instead. Like the American Thompson and Finnish Suomi designs, the M2 bolt was shaped with large diameter rear and slender front sections. Unlike the all metal M3 with a collapsing wire stock, the M2 had a fixed wooden stock with wooden handgrip and handguard. [5]

See also

Related Research Articles

<span class="mw-page-title-main">Submachine gun</span> Type of automatic firearm

A submachine gun (SMG) is a magazine-fed, automatic carbine designed to fire handgun cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun, to describe its design concept as an automatic firearm with notably less firepower than a machine gun. As a machine gun must fire rifle cartridges to be classified as such, submachine guns are not considered machine guns.

<span class="mw-page-title-main">Thompson submachine gun</span> American submachine gun

The Thompson submachine gun is a blowback-operated, air-cooled, magazine-fed selective-fire submachine gun, invented by United States Army Brigadier general John T. Thompson in 1918. It was originally designed to break the stalemate of trench warfare of World War I, but was not finished until after the war ended.

<span class="mw-page-title-main">M1 carbine</span> Auto-loading rifle

The M1 carbine is a lightweight semi-automatic carbine that was a standard firearm for the U.S. military during World War II, the Korean War and the Vietnam War. The M1 carbine was produced in several variants and was widely used by paramilitary and police forces around the world, and also became a popular civilian firearm after World War II.

The STEN is a family of British submachine guns chambered in 9×19mm which were used extensively by British and Commonwealth forces throughout World War II and the Korean War. They had a simple design and very low production cost, making them effective insurgency weapons for resistance groups, and they continue to see usage to this day by irregular military forces. The Sten served as the basis for the Sterling submachine gun, which replaced the Sten in British service until the 1990s, when it, and all other submachine guns, were replaced by the SA80.

<span class="mw-page-title-main">John Garand</span> American firearm designer

Jean Cantius Garand, also known as John C. Garand, was a Québec-born American designer of firearms who created the M1 Garand, a semi-automatic rifle that was widely used by the U.S. Army and U.S. Marine Corps during both World War II and the Korean War.

<span class="mw-page-title-main">M1903 Springfield</span> American bolt-action main battle rifle

The M1903 Springfield, officially the United States Rifle, Caliber .30-06, Model 1903, is an American five-round magazine-fed, bolt-action service repeating rifle, used primarily during the first half of the 20th century.

<span class="mw-page-title-main">M50 Reising</span> Submachine gun

The .45 Reising submachine gun was manufactured by Harrington & Richardson (H&R) Arms Company in Worcester, Massachusetts, USA, and was designed and patented by Eugene Reising in 1940. The three versions of the weapon were the Model 50, the folding stock Model 55, and the semiautomatic Model 60 rifle. Over 100,000 Reisings were ordered during World War II, and were initially used by the United States Navy, Marine Corps, and the United States Coast Guard, though some were shipped to Canadian, Soviet, and other allied forces to fight the Axis powers.

<span class="mw-page-title-main">Pedersen device</span> Semi-automatic rifle

The Pedersen device was an experimental weapon attachment for the M1903 Springfield bolt action rifle that allowed it to fire a .30 caliber (7.62 mm) pistol-type cartridge in semi-automatic mode. The attachment was developed to allow an infantryman to convert "their rifle to a form of submachine gun or automatic rifle" in approximately 15 seconds.

<span class="mw-page-title-main">FP-45 Liberator</span> Single-shot pistol, derringer

The FP-45 Liberator is a pistol manufactured by the United States military during World War II for use by resistance forces in occupied territories. The Liberator was never issued to American or other Allied troops, and there are few documented instances of the weapon being used for its intended purpose; though the intended recipients, irregulars and resistance fighters, rarely kept detailed records due to the inherent risks if the records were captured by the enemy. Few FP-45 pistols were distributed as intended, and most were destroyed by Allied forces after the war.

<span class="mw-page-title-main">Ithaca 37</span> Shotgun

The Ithaca 37 is a pump-action shotgun made in large numbers for the civilian, law enforcement and military markets. Based on a 1915 patent by firearms designer John Browning for a shotgun initially marketed as the Remington Model 17, it utilizes a novel combination ejection/loading port on the bottom of the gun which leaves the sides closed to the elements.

<span class="mw-page-title-main">United Defense M42</span> Submachine gun

The United Defense M42, sometimes known as the Marlin for the company that did the actual manufacturing, was an American submachine gun used during World War II. It was produced from 1942 to 1943 by United Defense Supply Corp. for possible issue as a replacement for the Thompson submachine gun and was used by agents of the Office of Strategic Services (OSS). However, its usage was limited, and the Thompson continued to see service until the end of the war, alongside the M3 submachine gun, which was designed around the same time as the M42.

<span class="mw-page-title-main">David Marshall Williams</span> American murderer and firearms designer

David Marshall Williams was an American firearms designer and convicted murderer who invented the floating chamber and the short-stroke piston. Both designs used the high-pressure gas generated in or near the breech of the firearm to operate the action of semi-automatic firearms like the M1 Carbine.

<span class="mw-page-title-main">Evelyn Owen</span> Inventor of the Owen Gun

Evelyn Ernest Owen was an Australian who developed the Owen gun which was used by the Australian Army in World War II, Korea and Vietnam wars.

<span class="mw-page-title-main">Mendoza RM2</span> Light machine gun

The Mendoza RM2 was a light machine gun similar to the M1918 BAR manufactured in Mexico by Productos Mendoza, S.A. Rafael Mendoza have been producing machine guns for the Mexican Army since 1933 and all have been noted for their lightness, simplicity, ease of maintenance, and economic construction without sacrificing reliability.

<span class="mw-page-title-main">M3 submachine gun</span> Type of Submachine gun

The M3 is an American .45-caliber submachine gun adopted by the U.S. Army on 12 December 1942, as the United States Submachine Gun, Cal. .45, M3. The M3 was chambered for the same .45 ACP round fired by the Thompson submachine gun, but was cheaper to mass produce and lighter, although, contrary to popular belief, it was less accurate. The M3 was commonly referred to as the "Grease Gun" or simply "the Greaser," owing to its visual similarity to the mechanic's tool.

The Model 1940 Light Rifle was a military semi-automatic carbine designed for Great Britain in preparation for World War II. The design was not considered suitable for full-scale production. Most trials rifles sent to Great Britain were destroyed at the end of World War II.

<span class="mw-page-title-main">Auto-Ordnance Company</span>

Auto-Ordnance is a U.S. arms development firm founded by retired Colonel John T. Thompson of the United States Army Ordnance Department in 1916. Auto-Ordnance is best known for the Thompson submachine gun, used as a military weapon by the Allied forces in World War II, and also notorious as a gangster weapon used during the Roaring Twenties.

<span class="mw-page-title-main">PPS submachine gun</span> Submachine gun

The PPS is a family of Soviet submachine guns chambered in 7.62×25mm Tokarev, developed by Alexei Sudayev as a low-cost personal defense weapon for reconnaissance units, vehicle crews and support service personnel.

<span class="mw-page-title-main">Lmg-Pist 41/44</span> Submachine gun

The Lmg.-Pistole Mod. 1941/44 – also known as Furrer MP 41/44, MP41/44 and LMG-Pistole – was the first submachine gun manufactured in Switzerland for the Swiss Army. The weapon used a complicated toggle-operated short recoil mechanism for its operation and it corresponds to that of the Furrer M25, which is why it is also called Lmg.-Pistole.

George J. Hyde Sr. was a German-born American machinist, gunsmith and gun designer best known for his submachine guns. He was born in Apfingen, Germany. Already a skilled machinist, he immigrated to the United States in 1927. His family followed the next year.

References

  1. 1 2 Canfield, Bruce N. American Rifleman (August 2008) p. 52
  2. 1 2 "patent".
  3. 1 2 3 4 5 6 7 Canfield, Bruce N. (2017). "MISSING LINK: The M2 Submachine Gun". American Rifleman . National Rifle Association of America. 165 (5): 92–95.
  4. Frank Iannamico, American Thunder: the Military Thompson Submachine Guns, Moose Lake Publishing, 2000, p. 149.
  5. Hogg, Ian & Weeks, John. "Military Small Arms of the 20th Century". Krause Publications (2000). ISBN   0-87341-824-7