Besa machine gun

Last updated

Besa machine gun
Besa machine gun.JPG
Besa machine gun
TypeTank-mounted medium machine gun
Place of origin Czechoslovakia, United Kingdom
Service history
In service1939–1960s
Used byUnited Kingdom, Ireland, Israel
Wars Second World War
1947–1949 Palestine war [1]
Korean War [2]
Second Arab–Israeli War [3]
Lebanese Civil War
Production history
Designer Václav Holek
Designed1936
Manufacturer The Birmingham Small Arms Company Limited
Produced1939–1945
No. built7.92mm: 39,332 in all variants. 15mm: 3,218 total production
VariantsMark I (1939–1940)
Mark II (1940–1943)
Mark II*(1943)
Mark III (1943–1951)
Mark III* (1943–1952)
Mark III/2 (1952–1966)
Mark III/3 (1954–1966)
15mm Besa Mark I (1939?–1949)
Specifications
Mass47 lb (21 kg) empty
Length43.5 in (1,100 mm)
Barrel  length29 in (740 mm), 4-groove rifling with right-hand twist

Cartridge 7.92×57mm Mauser
Calibre 7.9mm
Action gas automatic
Rate of fire 450–550 round/min (Low)
750–850 rounds/min (High)
Muzzle velocity 2,700 ft/s (823 m/s)
Feed system7.92mm: 225 metal link belt. 15mm: 25-round link belt

The Besa machine gun was a British version of the Czechoslovak ZB-53 air-cooled, belt-fed machine gun (called the TK vz. 37 in the Czechoslovak army [note 1] ).

Contents

The name came from the Birmingham Small Arms Company (BSA), who signed an agreement with Československá zbrojovka to manufacture the gun in the UK. The War Office ordered the weapon in 1938 and production began in 1939, after modifications.

It was used extensively by the armed forces of United Kingdom during the Second World War as a mounted machine gun for tanks and other armoured vehicles as a replacement for the heavier, water-cooled Vickers machine gun. Although it required a rather large opening in the tank's armour, it was reliable.

Development and use

Vickers Light Tank AA Mk I with 4 Besa machine guns IWM-E-16827-light-tank-AA-MkI-19420915.jpg
Vickers Light Tank AA Mk I with 4 Besa machine guns

Although British forces used the .303 in rimmed round for rifles and machine guns, the ZB-53 had been designed for the German 7.92×57mm Mauser round; referred to by the British as the 7.92 mm. The British had intended to move from rimmed to rimless ammunition but with war imminent, wholesale change was not possible. It was falsely believed by BSA and the Ministry of Supply that the industrial, technical and supply difficulty of converting the design to the .303 round would be more onerous than retaining the original calibre, especially given that the chain of supply for the Royal Armoured Corps was already separate from the other fighting arms of the British Army and the round was not changed for British production. Since the Besa used the same ammunition as Germany used in its rifles and machine guns, the British could use stocks of captured enemy ammunition, albeit without the ability to use their ammunition belts as packaged.

The .303 version of the ZB-53 was presented to the British officials in early 1937 and passed field trials in November 1937 with flying colours (0.5% of stoppages), however in September 1937 the Small Arms Committee had already decided it wanted the 7.92 mm version for which BSA was already tooling up because of the urgency. [4]

German 7.92x57mm Mauser ball ammunition dating from 1941. This ammunition could be used in the Besa if necessary. World War 2 German ammunition.JPG
German 7.92×57mm Mauser ball ammunition dating from 1941. This ammunition could be used in the Besa if necessary.

The Mark II version, license-produced by BSA in Birmingham as opposed to ZB's Mk I, entered service in June 1940. The design was modified to be more rapidly and economically produced and three simplified models, the Mark II*, Mark III and Mark III*, entered service in August 1943. The Mark II* was a transitional model designed to use the new simplified parts but was compatible with the Mark II. All those versions had a selector to give a high rate of fire (750–850 rounds per minute) for close combat or focused targets or a low rate of fire (450–550 rounds per minute) for long-range combat or area targets. The Mark III and Mark III* versions did away with this selector and had simplified parts like the Mark II* but were incompatible with the Mark II. The Mark III had a fixed high rate of fire (750–850 rpm) and the Mark III* had a fixed low rate of fire (450–550 rpm) [5] Damaged or malfunctioning Mark IIIs were converted to Mk III* at factories during repair. [6]

The earlier wartime Mark I, Mark II and Mark II* versions of the Besa 7.92 mm were declared obsolete in 1951 and all Mark III versions were converted to Mark III*. The Mark III/2 introduced in 1952 was a conversion of the Mark III* with a new bracket and body cover. The later Mark III/3 introduced in 1954 was a conversion of the Mark III/2 that replaced the barrel and sleeve and made the gas vents larger on the gas cylinder to make it easier to use belts of mixed ammunition. The post-war Mark III/2 and Mark III/3 remained in service until the late 1960s.[ citation needed ]

7.92x57mm Besa ammunition
DesignationIn ServiceMarkings
Cartridge S.A. Ball 7.92 m/m Mark IzMay 1939 – November 1941Purple annulus, Iz on headstamp.
Cartridge S.A. Ball 7.92 m/m Mark IIzSeptember 1941 – 1966Purple annulus, IIz on headstamp
Cartridge S.A. Tracer 7.92 m/m G Mark IzOctober 1939 – November 1941Red annulus, GIZ on headstamp
Cartridge S.A. Tracer 7.92 m/m G Mark IIzSeptember 1941 – 1945Red annulus, GIIZ on headstamp
Cartridge S.A. Tracer 7.92 m/m G Mark 3zApril 1945 – 1966Red annulus, G3Z on headstamp
Cartridge S.A. Armour-Piercing 7.92 m/m W Mark IzMarch 1941 – November 1941Green annulus, WIZ on headstamp
Cartridge S.A. Armour-Piercing 7.92 m/m W Mark IIzSeptember 1941 – 1966Green annulus, WIIZ on Headstamp
Cartridge S.A. Incendiary 7.92 m/m B Mark Iz1942–1966Blue annulus, BIZ on headstamp

15 mm Besa machine gun

Humber Armoured Car Mk 2 with 15 mm Besa HMG IWM-H-17835-Humber-Armoured-Car.jpg
Humber Armoured Car Mk 2 with 15 mm Besa HMG

A larger, heavier (121 lb (55 kg) in total, 50.5 lb (22.9 kg) of complete barrel [7] ) 15 mm version (also belt-fed) was developed by BSA from the Czechoslovak ZB-60 heavy machine gun as vehicle armament. It could be fired in semi-automatic mode as well as fully automatic. It was introduced in British service in June 1940 and was used on the Light Tank Mk VIC and on armoured cars such as the Humber Armoured Car Marks I–III. Over 3,200 15 mm Besa were manufactured until it was declared obsolete in 1949. [8] It fired a 75 grams (1,160 gr) bullet from a 15×104 mm  [ ru ] cartridge with a muzzle velocity of 818.3 m/s (2,685 ft/s) at a rate of 450 rounds per minute. [9] The 15 mm Besa was fed from 25-round metal belts, which limited its practical rate of fire, although the weapon was usually used for single shots as it was difficult to fire accurately in automatic. [10]

See also

Related Research Articles

<span class="mw-page-title-main">Bren light machine gun</span> Light machine gun

The Bren gun was a series of light machine guns (LMG) made by Britain in the 1930s and used in various roles until 1992. While best known for its role as the British and Commonwealth forces' primary infantry LMG in World War II, it was also used in the Korean War and saw service throughout the latter half of the 20th century, including the 1982 Falklands War. Although fitted with a bipod, it could also be mounted on a tripod or be vehicle-mounted.

<span class="mw-page-title-main">Lewis gun</span> Light machine gun

The Lewis gun is a First World War–era light machine gun. Designed privately in the United States though not adopted there, the design was finalised and mass-produced in the United Kingdom, and widely used by troops of the British Empire during the war. It had a distinctive barrel cooling shroud and top-mounted pan magazine. The Lewis served to the end of the Korean War, and was widely used as an aircraft machine gun during both World Wars, almost always with the cooling shroud removed, as air flow during flight offered sufficient cooling.

<span class="mw-page-title-main">Panzer 38(t)</span> Czechoslovak light tank used by Germany during WW2

The Panzerkampfwagen 38(t), originally known as the ČKD LT vz. 38, was a tank designed during the 1930s, which saw extensive service during World War II. Developed in Czechoslovakia by ČKD, the type was adopted by Nazi Germany following the annexation of Czechoslovakia. With the German Army and other Axis forces, the type saw service in the invasions of Poland, France and the USSR. Production ended in 1942, when its main armament was deemed inadequate. In all, over 1,400 Pz. 38(t)s were manufactured. The chassis of the Pz. 38(t) continued to be produced for the Marder III (1942–1944) with some of its components used in the later Jagdpanzer 38 (1944–1945) tank destroyer and its derivative vehicles.

<span class="mw-page-title-main">Anti-tank rifle</span> Anti-materiel rifle designed to penetrate the armor of armored fighting vehicles

An anti-tank rifle is an anti-materiel rifle designed to penetrate the armor of armored fighting vehicles, most commonly tanks, armored personnel carriers, and infantry fighting vehicles. The term is usually used for weapons that can be carried and used by one person, but is sometimes used for larger weapons. The usefulness of rifles for this purpose ran from the introduction of tanks in World War I until the Korean War. While medium and heavy tank armor became too thick to be penetrated by rigid projectiles from rifles that could be carried by a single soldier, anti-tank rifles continued to be used against other "soft" targets, though recoilless rifles and rocket-propelled grenades such as the bazooka were also introduced for infantry close-layer defense against tanks.

<span class="mw-page-title-main">Crusader tank</span> British WWII cruiser tank

Crusader, in full "Tank, Cruiser Mk VI, Crusader", also known by its General Staff number A.15, was one of the primary British cruiser tanks during the early part of the Second World War. Over 5,000 tanks were manufactured and they made important contributions to the British victories during the North African campaign. The Crusader tank would not see active service beyond Africa but the chassis of the tank was modified to create anti-aircraft, fire support, observation, communication, bulldozer and recovery vehicle variants.

<span class="mw-page-title-main">Cruiser Mk II</span> British cruiser tank

The Tank, Cruiser, Mk II (A10), was a cruiser tank developed alongside the A9 cruiser tank, and was intended to be a heavier, infantry tank version of that type. In practice, it was not deemed suitable for the infantry tank role and was classified as a "heavy cruiser". It served briefly in World War II.

<span class="mw-page-title-main">Vickers machine gun</span> Heavy machine gun

The Vickers machine gun or Vickers gun is a water-cooled .303 British (7.7 mm) machine gun produced by Vickers Limited, originally for the British Army. The gun was operated by a three-man crew but typically required more men to move and operate it: one fired, one fed the ammunition, the others helped to carry the weapon, its ammunition, and spare parts. It was in service from before the First World War until the 1960s, with air-cooled versions of it on many Allied World War I fighter aircraft.

<span class="mw-page-title-main">.303 British</span> British military rifle cartridge

The .303 British or 7.7×56mmR, is a .303-inch (7.7 mm) calibre rimmed rifle cartridge. The .303 inch bore diameter is measured between rifling lands as is the common practice in Europe which follows the traditional black powder convention.

<span class="mw-page-title-main">Boys anti-tank rifle</span> British anti-tank rifle of WW2

The Boys anti-tank rifle was a British anti-tank rifle used during the Second World War. It was often nicknamed the "elephant gun" by its users due to its size and large 0.55 in (14 mm) bore.

<span class="mw-page-title-main">Cruiser Mk IV</span> British WWII cruiser tank

The Cruiser Tank Mk IV was a British cruiser tank of the Second World War. It followed directly on from the Tank, Cruiser, Mk III. The first Mk IVs were Mk IIIs with extra armour fitted to the turret. Later Mk IVAs were built with the complete extra armour. The tank was used in France in 1940 and in the early part of the war in North Africa, before being withdrawn from service. A fast vehicle compared to other British tanks of the early part of the war, it was probably the best tank Britain had in 1940. In total, 955 of these tanks were built.

<span class="mw-page-title-main">Humber Armoured Car</span> British armoured car

The Humber Armoured Car was one of the most widely produced British armoured cars of the Second World War. It supplemented the Humber Light Reconnaissance Car and remained in service until the end of the war.

<span class="mw-page-title-main">AEC Armoured Car</span> British heavy armoured car

AEC Armoured Car is the name of a series of British heavy armoured cars built by the Associated Equipment Company (AEC) during the Second World War.

<span class="mw-page-title-main">7.92×57mm Mauser</span> German military rifle cartridge

The 7.92×57mm Mauser is a rimless bottlenecked rifle cartridge. The 7.92×57mm Mauser cartridge was adopted by the German Empire in 1903–1905, and was the German service cartridge in both World Wars. In its prime, the 7.92×57mm Mauser cartridge was one of the world's most popular military cartridges. In the 21st century it is still a popular sport and hunting cartridge that is factory-produced in Europe and the United States.

<span class="mw-page-title-main">Tanks of the interwar period</span>

Tanks were initially deployed in World War I, engineered to overcome the deadlock of trench warfare. Between the two world wars, tanks were further developed. Although they had demonstrated their battlefield effectiveness, only a few nations had the industrial resources to design and build them. During and after World War I, Britain and France pioneered tank technology, with their models generally serving as a blueprint for other countries. However, this initial advantage would slowly diminish during the 1930s, shifting in favor of the Soviet Union and, to a lesser degree, Nazi Germany.

<span class="mw-page-title-main">ZB vz. 26</span> Light machine gun

The ZB vz. 26 was a Czechoslovak light machine gun developed in the 1920s, which went on to enter service with several countries. It saw its major use during World War II, and spawned the related ZB vz. 27, vz. 30, and vz. 33. The ZB vz. 26 influenced many other light machine gun designs including the British Bren light machine gun and the Japanese Type 97 heavy tank machine gun. The ZB-26 is famous for its reliability, simple components, quick-change barrel and ease of manufacturing. This light machine gun in the Czechoslovak army was marked as the LK vz. 26. ZB vz. 26 is incorrect nomenclature because "ZB-26" is a factory designation, while "vzor 26" or "vz. 26" is an army designation.

<span class="mw-page-title-main">Vickers .50 machine gun</span> Machine gun

The Vickers .50 machine gun, also known as the 'Vickers .50' was similar to the .303 inches (7.70 mm) Vickers machine gun but enlarged to use a larger-calibre 0.5-inch (12.7 mm) round. It saw some use in tanks and other fighting vehicles but was more commonly used as a close-in anti-aircraft weapon on Royal Navy and Allied ships, typically in a four-gun mounting (UK) or two-gun mounting (Dutch). The Vickers fired British .50 Vickers (12.7×81mm) ammunition, not the better known American .50 BMG (12.7×99mm).

The British Army made extensive use of a variety of combat vehicles during the Second World War. This article is a summary of those vehicles.

<span class="mw-page-title-main">ZB-53</span> Medium machine gun

The ZB-53 was a Czechoslovak machine gun. A versatile weapon, it was used both as a squad support weapon, as a mounted machine gun for tanks and other armoured vehicles, and on fixed positions inside Czechoslovak border fortifications. Adopted before the World War II by the armies of Czechoslovakia (as Těžký kulomet vz. 37, Heavy machine gun model 37) and Romania, it was also license-built in the United Kingdom as the Besa machine gun. Following the German invasion of Czechoslovakia, large quantities of the weapon were captured by the Wehrmacht and used during the war under the designation of MG 37(t).

<span class="mw-page-title-main">M1919 Browning machine gun</span> American medium machine gun

The M1919 Browning is a .30 caliber medium machine gun that was widely used during the 20th century, especially during World War II, the Korean War, and the Vietnam War. The M1919 saw service as a light infantry, coaxial, mounted, aircraft, and anti-aircraft machine gun by the U.S. and many other countries.

References

Notes
  1. "TK" from těžký kulomet "heavy machine gun"; "vz" from vzor "Model"
Citations
  1. Laffin, John (29 July 1982). The Israeli Army in the Middle East Wars 1948–73. Men-at-Arms 127. Osprey Publishing. p. 8. ISBN   9780850454505.
  2. Tucker, Spencer C.; Pierpaoli, Paul G. Jr., eds. (2010). "Machine guns". The Encyclopedia of the Korean War: A Political, Social, and Military History. Vol. 1. A–L (2nd ed.). ABC-CLIO. p. 535. ISBN   978-1-85109-849-1. Archived from the original on 16 November 2018. Retrieved 15 November 2018.
  3. Katz, Sam (23 June 1988). Israeli Elite Units since 1948. Elite 18. Osprey Publishing. p. 13. ISBN   9780850458374.
  4. Royal Amouries (1 March 2023), Britain's Czech-made WW2 tank machine gun in.. .303? With Curatorial Assistant, Christian Wellard, YouTube, retrieved 16 July 2023
  5. "BESA (Gun, Machine, 7.92mm, BESA)". www.militaryfactory.com. Retrieved 27 December 2007.
  6. Illustrated Identification List p3
  7. The BESA 15 mm Heavy Machine Gun. BSA Guns via Historical Breechloading Smallarms Association. p33
  8. Jane's Infantry Weapons. 1975. p. 453.
  9. "British Tanks Equipment". Archived from the original on 16 September 2011. Retrieved 25 December 2014.
  10. David Fletcher (1989). Universal Tank: British Armour in the Second World War – Part 2. HMSO. ISBN   0-11-290534-X. p.20
Bibliography