Snap cap

Last updated
An assortment of snap caps of varying calibers, from left:
(1st row) .22 LR, 9mm (both), .45 ACP,
(2nd row) 30-06 (both),
(3rd row) 12 Ga. Snap caps.jpg
An assortment of snap caps of varying calibers, from left:
(1st row) .22 LR, 9mm (both), .45 ACP,
(2nd row) 30-06 (both),
(3rd row) 12 Ga.

A snap cap is a firearm accessory device shaped like a standard cartridge/shotshell but contains no functional components, namely the primer, propellant (gunpowder) and projectile (bullet or slug). It serves the same purpose as a dummy round, but different in that a dummy is usually modified from a real cartridge with its propellant and primer removed (but still has the projectile crimped to the casing), while a snap cap has a monolithic outer shell and is specifically designed to be a fake cartridge from the very beginning.

Contents

The term "snap cap" is a generic trademark of the fake cartridge originally introduced by American firearm accessory brand "A-Zoom", and is a word play on percussion cap. It is now used to refer to any accessory product made to perform similar function. [1]

Description

A pair of 12 gauge shotshell snap caps with spring-damped fake primers 100 1090.jpg
A pair of 12 gauge shotshell snap caps with spring-damped fake primers

A snap cap is used to ensure that dry-firing firearms of certain designs does not cause stress and impact damage to the firing pin and/or the barrel breech. Some snap caps contain a false primer that is either spring-buffered, made of rubber or soft polymer, or none at all. The springs or plastic will absorb the impact force from the firing pin during dry-firing, allowing the user to practice trigger pull or safely test the function of the firearm action without damaging its components.[ citation needed ]

Rimfire and a small number of centerfire firearms of older design should not be test-fired with the chamber empty, as this can lead to weakening or breakage of the firing pin and increased wear to other components in those firearms. In the instance of a rimfire firearm, dry firing can also cause deformation of the chamber edge due to the firing pin striking it without the cartridge rim in between. For this reason some shooters use a snap cap in an attempt to cushion the firearm's firing pin as it moves forward. Most commercial snap caps have a polymer/rubber false primer to receive the firing pin strikes, which is usually usable for up to 300 to 400 clicks. After that, due to the impact crater on the false primer becoming deepened from the repeated strikes, the firing pin does not touch and transfer its momentum, and the snap cap loses its cushioning effect. Some higher-end snap caps have a spring-dampened false primer that can last much longer, but are also more expensive to make.[ citation needed ]

Some snap caps are made of a soft aluminum coated with paint. Other snap caps are manufactured using traditional brass shell casings and injecting a polymer material, [2] while others are made from a solid piece of plastic, including via 3D printing.[ citation needed ]

Uses

Function check

Snap caps are used to confirm a firearm is functioning properly without using live ammunition. In the case of some repeating firearms, it can be used to ensure the magazine is feeding ammunition properly up the feed ramp and into the chamber.[ citation needed ]

Dry-fire practice

Snap caps are used for general dry-firing practice. There is some debate as to if dry firing a handgun may cause damage to the firing pin in a modern firearm. Using a snap cap or dummy round eliminates any potential risk of doing so if the snap cap has a solid primer cup. Some snap caps are made without a primer cup, and thus do not address this potential concern.[ citation needed ]

Malfunction training

Snap caps and action-proving dummy cartridges also work as a training tool to simulate firearm malfunctions, the same as a dud would. The shooter loads one or more snap caps into the firearm or magazine along with live rounds; when the trigger is pulled with a snap cap in the chamber, a failure to fire occurs. The shooter can then practice clearing the bad round, which generally requires manually cycling the slide of a semi-automatic pistol.[ citation needed ]

Trigger control training

As with malfunction training, snap caps are loaded along with live rounds, so that when the trigger is pulled with a snap cap in the chamber, the firearm does not fire. Here, the intent is to observe whether the shooter maintained proper trigger control (that is, did not flinch). This is often referred to as a ball and dummy drill. [3] [4]

Related Research Articles

<span class="mw-page-title-main">Firearm</span> Gun for an individual

A firearm is any type of gun designed to be readily carried and used by an individual. The term is legally defined further in different countries.

<span class="mw-page-title-main">Gun safety</span> Study and practice of safe operation of firearms

Gun safety is the study and practice of using, transporting, storing and disposing of firearms and ammunition, including the training of gun users, the design of weapons, and formal and informal regulation of gun production, distribution, and usage, for the purpose of avoiding unintentional injury, illness, or death. This includes mishaps like accidental discharge, negligent discharge, and firearm malfunctions, as well as secondary risks like hearing loss, lead poisoning from bullets, and pollution from other hazardous materials in propellants and cartridges. There were 47,000 unintentional firearm deaths worldwide in 2013.

<span class="mw-page-title-main">Revolver</span> Firearm with a cylinder holding cartridges

A revolver is a repeating handgun that has at least one barrel and uses a revolving cylinder containing multiple chambers for firing. Because most revolver models hold up to six cartridges, before needing to be reloaded, revolvers are commonly called six shooters.

<span class="mw-page-title-main">Cartridge (firearms)</span> Ammunition consisting of a casing, projectile, propellant, and primer

A cartridge, also known as a round, is a type of pre-assembled firearm ammunition packaging a projectile, a propellant substance and an ignition device (primer) within a metallic, paper, or plastic case that is precisely made to fit within the barrel chamber of a breechloading gun, for convenient transportation and handling during shooting. Although in popular usage the term "bullet" is often used to refer to a complete cartridge, the correct usage only refers to the projectile.

<span class="mw-page-title-main">Centerfire ammunition</span> Type of ammunition common in higher-caliber firearms

A centerfire cartridge is a firearm metallic cartridge whose primer is located at the center of the base of its casing. Unlike rimfire cartridges, the centerfire primer is typically a separate component seated into a recessed cavity in the case head and is replaceable by reloading.

<span class="mw-page-title-main">Rimfire ammunition</span> Type of ammunition common in low-caliber firearms

Rimfire ammunition is a type of firearm metallic cartridge whose primer is located within a hollow circumferential rim protruding from the base of its casing. When fired, the gun's firing pin will strike and crush the rim against the edge of the barrel breech, sparking the primer compound within the rim, and in turn ignite the propellant within the case. Invented in 1845, by Louis-Nicolas Flobert, the first rimfire metallic cartridge was the .22 BB Cap cartridge, which consisted of a percussion cap with a bullet attached to the top. While many other different cartridge priming methods have been tried since the mid-19th century onwards, such as pinfire, only small caliber rimfire and centerfire cartridges have survived to the present day with regular usage. The .22 Long Rifle rimfire cartridge, introduced in 1887, is by far the most common ammunition in the world today in terms of units sold.

<span class="mw-page-title-main">Caseless ammunition</span> Type of weapon-cartridge

Caseless ammunition (CL), or rather caseless cartridge, is a configuration of weapon-cartridge that eliminates the cartridge case that typically holds the primer, propellant and projectile together as a unit. Instead, the propellant and primer are fitted to the projectile in another way so that a cartridge case is not needed, for example inside or outside the projectile depending on configuration.

<span class="mw-page-title-main">.22 Long Rifle</span> Common ammunition cartridge

The .22 Long Rifle or simply .22 LR or 22 is a long-established variety of .22 caliber rimfire ammunition originating from the United States. It is used in a wide range of rifles, pistols, revolvers, shotguns, and submachine guns.

<span class="mw-page-title-main">Blank (cartridge)</span> Firearms filler device that produces an explosion but does not fire a projectile

A blank is a firearm cartridge that, when fired, does not shoot a projectile like a bullet or pellet, but generates a muzzle flash and an explosive sound like a normal gunshot would. Firearms may need to be modified to allow a blank to cycle the action, and the shooter experiences less recoil with a blank than with a live round. Blanks are often used in prop guns for shooting simulations that have no need for ballistic results, but still demand light and sound effects, such as in historical reenactments, special effects for theatre, movie and television productions, combat training, for signaling, and cowboy mounted shooting. Specialised blank cartridges are also used for their propellant force in fields as varied as construction, shooting sports, and fishing and general recreation.

<span class="mw-page-title-main">Firing pin</span> Part of the firing mechanism in a firearm

A firing pin or striker is a part of the firing mechanism of a firearm that impacts the primer in the base of a cartridge and causes it to fire. In firearms terminology, a striker is a particular type of firing pin where a compressed spring acts directly on the firing pin to provide the impact force rather than it being struck by a hammer.

<span class="mw-page-title-main">.22 CB</span>

The .22 CB cap is a more powerful version of the .22 BB cap rimfire metallic cartridge, which was invented by Louis-Nicolas Flobert in 1845. The .22 BB cap and .22 CB cap are interchangeable and are relatively quiet, low velocity cartridges, designed for indoor target shooting.

<span class="mw-page-title-main">Caliber conversion sleeve</span> Device used to allow a firearm to fire a different cartridge

A caliber conversion sleeve or adapter sleeve is a device which can be used to non-permanently alter a firearm to allow it to fire a different cartridge than the one it was originally designed to fire. The different cartridge must be smaller in some dimensions than the original design cartridge, and since smaller cartridges are usually cheaper, the device allows less expensive fire practice.

<span class="mw-page-title-main">Slamfire</span> Discharge of a firearm as a cartridge is being loaded into the chamber

A slamfire is a discharge of a firearm occurring as a cartridge is being loaded into the chamber. Some firearms are designed to slamfire, but the term also describes a malfunction of self-loading firearms. Shooters accustomed to firearms requiring trigger activation for discharge may be unprepared for a slamfire discharge.

The Voere VEC-91 is a rifle made by Voere and was the first commercial sporting rifle to combine caseless ammunition and electronic firing. Depending upon its chambering, it fired a 5.56 (0.223"), 5.7 mm or 6 mm projectile at muzzle velocities of up to 930 metres per second. The rifle was first exported to the United States in 1993, but was not a commercial success.

<span class="mw-page-title-main">Dry fire</span> "Firing" of a firearm without loaded ammunition

Dry firing is the practice of simulating the discharge of a firearm without any live ammunition, or practicing with an inert laser/infrared training platform and may also include the use of a target/feedback system. The terms also commonly refers to simply "firing" a gun that has no ammunition in it. Concern is commonly expressed that doing so might damage the gun.

The following are terms related to firearms and ammunition topics.

A firearm malfunction is the failure of a firearm to operate as intended for causes other than user error. Malfunctions range from temporary and relatively safe situations, such as a casing that did not eject, to potentially dangerous occurrences that may permanently damage the gun and cause injury or death. Improper handling of certain types of malfunctions can be very dangerous. Following gun safety rules can prevent firearm malfunctions, and limit the damage inflicted by them if they do occur. Proper cleaning and maintenance of a firearm play a big role in preventing malfunctions.

<span class="mw-page-title-main">Safety (firearms)</span> Feature on firearms to prevent accidental discharge

In firearms, a safety or safety catch is a mechanism used to help prevent the accidental discharge of a firearm, helping to ensure safer handling.

In firearms and artillery, the primer is the chemical and/or device responsible for initiating the propellant combustion that will propel the projectiles out of the gun barrel.

<span class="mw-page-title-main">Louis-Nicolas Flobert</span>

Louis-Nicolas Flobert (1819–1894) was a French inventor. He invented the first rimfire metallic cartridge in 1845. It was a major innovation in firearms ammunition, previously delivered as separate bullets and powder. The rimfire cartridge combined both elements in a single metallic cartridge containing a percussion cap, powder and a bullet, in one weatherproof package. Before that, a "cartridge" was simply a pre-measured quantity of gunpowder together with a ball (bullet), in a small cloth bag which also acted as wadding for the charge and ball.

References

  1. "Simple and Effective: Why You Need Dummy Rounds". ConcealedCarry.com. 1 May 2018.
  2. "Comparing Dummy Ammunition". ConcealedCarry.com. 23 July 2018.
  3. Kee, Tyler (December 2, 2011). "Snap Caps Just Changed My Life". thetruthaboutguns.com. Retrieved December 5, 2019.
  4. Roberts, Patrick (April 19, 2018). "How To Stop Flinching: Ball & Dummy Drill". Archived from the original on 2021-12-22. Retrieved December 5, 2019 via YouTube.