Kawasaki KDX200

Last updated
Kawasaki KDX200
Manufacturer Kawasaki
Production1983-2006
Engine 198 cc single-cylinder, air cooled (83-87), liquid-cooled (88-06), 2-stroke
Compression ratio 7.7 : 1 high speed / 9.2 : 1 low speed
Power 37 bhp (28 kW)('95-'06 models)[ citation needed ]
Suspension Telescoping fork, Uni-Trak swingarm
Fuel capacity3.2 gallons / 12 litres
Oil capacity0.75 litres / 0.80 quarts

The Kawasaki KDX200 is an intermediate enduro motorcycle intended predominantly for off-road use. It was introduced in 1983 after revisions to the preceding KDX175. It has been a long-standing model in Kawasaki's lineup, having been introduced in the early 1980s, seeing several revisions along the way up to the end of its production in 2006. The KDX200 had Kawasaki's KIPS (Kawasaki Integrated Powervalve System), assisting to maximize mid-range to top end power.

Contents

Generational revisions

While performance specs remain consistent for all specific models, some differences may apply to non-American models such as frame and plastic color, metal fuel tank, oil injection, features such as blinker lights, high output coil/stator, battery rack, luggage rack, etc.

KDX200 "A" (1983-1985)

KDX200 "B" (1984-1985) runs concurrently with A model variations unconfirmed - possibly local market changes.

First KDX200. 198cc engine upped from the preceding 173cc.

-Gain in displacement volume is through longer stroke; Bore diameter remains the same as the 175.

-New gear ratios in six-speed transmission, one more clutch plate added(7 from 6)

-Chassis based on 1983 KX125; steel tubing, box-section aluminum swingarm,

-Adjustable damping aluminum shock, 38mm Kayaba forks,

-Electronic odometer

-1984(A2) available in green, or black frame with red plastic

-1985 - new 34mm Mikuni “R” slide carburetor

Specifications for 1983-1985 U.S. Model
Engine TypeSingle-cylinder, air-cooled, two-stroke
Carburetion34mm Mikuni carb
Displacement198cc
Bore × Stroke66.0 x 58.0 mm
Compression Ratio7.7 : 1
Fuel Capacity12.5 Litres
Oil Capacity0.7L / (0.74 US qt)
Seat Height1984-1985: 37" per Kawasaki specs
Dry Weight101 kg[ citation needed ]
TiresFront: 80/100-21 Back: 110/100-18
BrakesFront: Single 221mm disc Back: 110mm drum
Final drive6 Speed / chain

KDX200 "C" (1986-1988)

1987 KDX200 1987 KDX200 C.jpg
1987 KDX200

New KIPS powervalve system, new 43mm conventional forks, new rear shock, front disc brake

Specifications for 1986-1988 U.S. Model
Engine TypeSingle-cylinder, air-cooled, two-stroke piston and reed valve
CarburetionMikuni VM34SS
Displacement198 mL (12.08 cu in)
Bore × Stroke66.0x58.0 mm (2.60 X 2.28 in)
Compression Ratio7.7:1
Fuel Capacity12.5L (3.3 US gal)
Oil Capacity700 mL (0.74 US qt)
Seat Height36.2" to 37" ?
Dry Weight101 kg (223 lb)[ citation needed ]
Tires80/100 - 21 51M (front), 100/100 -18 59M (rear)
BrakesFront: Disk brake diameter 220 mm (8.7 in) Rear: Internal expanding, leading trailing 110X30 mm (4.3X1.2 in)
Final drive3.692 (48X13)

KDX200 "E" (1989-1994)

1993 KDX200-E Kawasaki 1992 KDX200.jpg
1993 KDX200-E
KDX200 SR model Kawasaki KDX 200 SR.jpg
KDX200 SR model

Many key upgrades came to the KDX200 in 1989. It received liquid cooling, a modified powervalve system with larger expansion bottle and valves, a heavier crank, dual disc brakes, heavier clutch springs and more plates, a newly modeled frame with a modern style linkage, KX125-based shock with 16 compression and 16 rebound adjustments, quick release access for rear wheel, large airbox, and a 12.0 litres (2.6 imp gal; 3.2 US gal) fuel tank.

-41 mm upside down forks came standard in 93 and 94 models

Specifications for 1989-1994 U.S. Model
Engine TypeSingle-cylinder, liquid-cooled, two-stroke piston reed valve
CarburetionKeihin PWK-35
Displacement198cc
Bore × Stroke66.0 x 58.0 mm
Compression Ratio7.7:1 (high speed) 9.2:1 (low speed)
Fuel Capacity12.0L
Oil CapacitySAE 10w30 or 10w40 0.75L
Seat Height910mm
Dry Weight102 kg[ citation needed ]
Tires(tube)Front: 80/100-21 51mm Back: 100/100-18 59mm
BrakesFront and rear: single piston; disc
Final driveChain drive; 3.625 (47/13)

KDX200 "H" (1995-2006)

2005 KDX200-H Kawasaki 2005 KDX200.jpg
2005 KDX200-H

Notes: 1995 brought a modern new look and a redesigned KIPS powervalve system including larger valves and a central powervalve in the exhaust manifold.

-First perimeter frame

-43mm Kayaba cartridge type forks

-higher compression

-Larger radiators

-Larger clutch

-Taller seat

Specifications for 1995-2006 U.S. Model [1]
Engine TypeSingle-cylinder, liquid cooled, two-stroke
CarburetionKeihin PWK35
Displacement198cc
Bore × Stroke66 x 58 mm (oversquare - shortstroke)
Compression Ratio7.9:1
Fuel Capacity11 L
Oil Capacity0.7 L
Seat Height920mm
Width890mm
Dry weight101 kg
TiresFront:80/100-21 Back: 100/100-18
BrakesFront: Single 250mm disc 2 piston caliper Back: Single 230mm disc 1 piston caliper
Final drive6 Speed / chain

The KDX200 saw its last production run in 2006, with left over models being sold through 2007 and into mid 2008 in some areas.

Related Research Articles

Kawasaki KLR650

The Kawasaki KLR650 is a dual-sport motorcycle intended for both on-road and off-road riding. It was a long-standing model in Kawasaki's lineup, having been introduced in 1987 and remaining almost unchanged through the 2007 model. The 2008 model was the first significant redesign of the KLR650 since its inception. It was built with a 651 cc four-stroke, DOHC, dual-counterbalanced, single-cylinder, water-cooled engine.

Kawasaki Ninja ZX-7R motorcycle

The Kawasaki Ninja ZX-7R was a motorcycle in the Ninja sport bike series from the Japanese manufacturer Kawasaki produced from 1989 until 2003. It remained largely unchanged through its production. Kawasaki used inverted forks starting in 1991, added ram air using a single tube, and in 1996, twin tube ram air and Tokico six piston brakes and fully adjustable suspension. From 1989 through 1995 in the US market, Kawasaki called the ZXR-750 and ZXR-750R the ZX-7 and ZX-7R respectively. Starting from 1996 Kawasaki dropped the ZXR name worldwide and the former ZXR-750 was now ZX-7R and the limited edition homologation special ZXR-750R/ZX-7R started in 1991 was now ZX-7RR.

The Honda XR series is a range of four-stroke off-road motorcycles that were designed in Japan but assembled all over the world.

Yamaha XS 650 Yamaha motorcycle

The Yamaha XS650 is a mid-size motorcycle made by Yamaha Motor Company. The standard model was introduced in October 1969,and produced through 1979. The "Special" cruiser model was introduced in 1978 and produced through 1985. The XS650 began with the 1955 Hosk SOHC 500 twin. After about 10 years of producing 500 twin, Hosk engineers designed a 650 cc twin. Later the Hosk company was acquired by Showa Corporation, and in 1960 Yamaha had bought Showa with Hosk's early design of 650 cc twin.

Suzuki RGV250

The Suzuki RGV250 (Gamma) was a Suzuki high performance sport bike which had a great number of its features and design cues based on Grand Prix technologies and ideas. It is a race-replica based on Suzuki's 250 cc (15 cu in) GP bikes from 1987 to 1998, the RGV Gamma V-2 racer. This motorcycle replaced the RG250 Gamma, which employed an alloy frame with a two-stroke parallel twin engine. The bike produced over 50 bhp in a narrow power band between 8,000 and 11,000 rpm. The dry weight ranged between 128 kg (282 lb) (1989) to 140 kg (309 lb) dry weight.

Suzuki GSX-R750 750 cc class sport bike motorcycle from Suzukis GSX-R series of motorcycles - JAPONESA

Suzuki GSX-R750 is a family of 750 cc sports motorcycles from Suzuki's GSX-R series of motorcycles. Looking like a Suzuki Endurance racer, it can be considered to be the first affordable, modern racer-replica suitable for road use. It was introduced at the Cologne Motorcycle Show in October 1984.

The Kawasaki KX 250F is a liquid-cooled DOHC 249 cc (15.2 cu in) four-valve four-stroke single motocross motorcycle made by Kawasaki.

A motorcycle's suspension serves a dual purpose: contributing to the vehicle's handling and braking, and providing safety and comfort by keeping the vehicle's passengers comfortably isolated from road noise, bumps and vibrations.

The Ducati Hypermotard is a supermotard Ducati motorcycle designed by Pierre Terblanche and was first seen at the November 2005 EICMA trade show in Milan. The Hypermotard was awarded "Best of Show" at EICMA and has since won other show awards. The Hypermotard has a 1,078 cc (65.8 cu in) dual spark 'Desmo' or 'Desmodromic' aired-cooled two-valve 90° V-twin engine with fuel injection and weighs under 180 kg (396 lb). The Hypermotard is capable of speeds in the region of 125 mph (201 km/h).

BMW R60/2

The R60 and R60/2 are 600 cc boxer-twin that were manufactured from 1956 to 1969 in Munich, Germany, by BMW.

Kawasaki Ninja ZX-9R

The Kawasaki Ninja ZX-9R was a motorcycle in the Ninja sport bike series from the Japanese manufacturer Kawasaki produced from 1994 until 2003. There were five model incarnations across two basic designs.

The Suzuki LT250R was a sport ATV manufactured between 1985 and 1992. It combined a lightweight frame and good handling, with a liquid cooled 250cc two-stroke engine.

Suzuki GT550

The Suzuki GT550 is a two-stroke, air-cooled, three cylinder 1970s-era motorcycle in Suzuki's "Grand Touring" GT series. Three Grand Touring models including the GT380 and GT750 and were originally offered for sale with the beginning of the 1972 model year (MY) with the 550 called "Indy" for the North American market. In Suzuki's numbering scheme, automobile race tracks identify each of its 3-cylinder GT bikes for the North America market: Sebring for the 380, Indy for the 550 and Le Mans for the 750.

Ducati ST series

The Ducati ST series is a set of Italian sport touring motorcycles manufactured by Ducati from 1997 through 2007. In order of release, the series comprised five distinct models: the ST2, ST4, ST4S, ST3, and ST3S. Intended to compete with other sport-tourers such as the Honda VFR, the ST Ducatis had a full fairing, a large dual seat and a relaxed riding position for both rider and pillion. The ST bikes had a centre-stand, and could be fitted with optional matching luggage.

Kawasaki KR-1/KR-1S motorcycle series

The Kawasaki KR-1 and KR-1S are road-orientated 249 cc (15.2 cu in) two-stroke sports bikes introduced between 1988 and 1992 by Kawasaki Heavy Industries.

The Kawasaki KLX 450R is an off-road motorcycle made by Kawasaki Heavy Industries of Japan. It was first made available in 2007 and is still being produced today, relatively unchanged except for color schemes and graphics. The KLX 450R is essentially a KX450F open-class motocross bike with added convenience features that make it more suitable for trail riding, green laning, enduro events and lower speed riding in general. This is due to the larger gas tank, 18 inch rear wheel, headlamp and even electric start. The KLX also features a motor retuned for easier low speed running, offering more torque and smoother throttle response at low engine speeds. Some of this is achieved by less aggressive engine internals and the "low boy" exhaust header pipe.

Kawasaki A1 Samurai motorcycle

The Kawasaki A1 Samurai is a 250 cc (15 cu in) standard class Kawasaki motorcycle which was sold from 1967 through 1971.

Kawasaki GPZ1100

The Kawasaki GPZ1100 is a motorcycle that was manufactured by Kawasaki from 1981 to 1985. All four models featured fuel injection and 1,089 cc engines. All were short lived and were an attempt to fill a market segment that was rapidly changing.

The Kawasaki KX 500 is a 499 cc (30.5 cu in) two-stroke single motocross motorcycle made by Kawasaki from 1983 until 2004.

Honda C92, CB92, C95 Benly Parallel-twin motorcycle

The Honda C92 Benly is a 125 cc (7.6 cu in) parallel-twin motorcycle made by Honda from 1959 through 1965. Running concurrently were the CB92 Sports and the slightly larger C95 150 cc (9.2 cu in), called the CA92 and CA95 in the US. These twins took their styling and design cues from the larger-displacement Honda C71, C76, C72, C77 Dream series.

References

  1. Kawasaki Heavy Industries. KDX200 Motorcycle Service Manual.