Kimber Custom

Last updated
Kimber Custom
Kimberstainlesscustomii.jpg
Kimber Custom Stainless II
Type Semi-automatic pistol
Place of originUnited States
Service history
In service1997 – present
Used by LAPD SWAT
OCSD SWAT
USMC Force Recon
Production history
Manufacturer Kimber
VariantsCustom
Custom II
Specifications
Mass38 ounces
Length8.7 inches
Barrel  length5 inches
Width1.3 inches
Height5.3 inches

Caliber .45 ACP
9×19mm
Action semi-automatic, single action
Feed system7-, 8- or 10-round magazine

The Kimber Custom is an M1911 style semi-automatic pistol. It is designed, manufactured, and distributed by Kimber Manufacturing, Inc. in Yonkers, New York.

Contents

Overview

The Custom is made in a variety of styles with different features and finishes. As an M1911 style pistol, it is usually chambered in .45 ACP.

It also has been produced in other calibers, including .40 S&W, 10mm Auto, 9mm Luger, and .38 Super.

The individual gun's caliber is stamped on top of the barrel and is visible with the slide in battery (fully forward).

Features

The Custom is a full-sized model 1911, with a five-inch barrel.

The frame and slide are made of steel. The Custom utilizes a single full-length guide rod, necessitating the serrations on the front of the slide for press checks.

Although the Custom is considered Kimber's base model, it has a number of features that were formerly found only on customized model 1911s, such as a lowered ejection port, custom trigger, beveled magazine well, extended thumb safety, and beavertail grip safety. [1]

The original Custom model has been superseded by the Custom II. The Custom II has an internal firing pin safety.

This feature is designed to provide additional assurance that the gun will not fire if dropped, as the firing pin is blocked from striking the chambered cartridge unless the grip safety is depressed.

Variants

Custom TLE II

The Kimber Custom TLE II is a model of Kimber Custom; the designation "TLE" stands for "Tactical Law Enforcement".

The TLE is identical, except for the markings, to a special model that was designed for use by the LAPD SWAT team. [2]

Unlike the standard Custom, it comes with tritium bar-dot night sights and 30 lines per inch frontstrap checkering. [3]

The TLE has been manufactured in the following variations:

Warrior series

The Kimber Warrior and Desert Warrior are models that are based on a special version of the Custom that was built for the United States Marine Corps Forces Special Operations Command. [4]

The Warrior and Desert Warrior have a frame-integrated M1913 light rail, Kimber Meprolight tritium night sights, and Kimber's own special grips that are very similar to the Gunner grips in coyote brown. They are delivered with Kimber factory magazines. They are otherwise the same as the ICQB pistols.

The Warrior has a matte black KimPro finish and a standard Custom trigger. The Desert Warrior comes in a green-tan KimPro finish that would blend in with desert camouflage, and has a solid trigger. [5]

ICQB

The MARSOC pistol, known as the Kimber ICQB (Interim Close Quarter Battle) pistol, does not have an internal firing pin block as seen on the rest of the current Kimber Custom models, hence a "II" does not follow the Warrior or Desert Warrior's names.

These pistols have an ambidextrous thumb safety, a lanyard loop, an internal extractor, and, in contrast to other Custom models, a standard length recoil spring guide rod to allow easier field stripping without tools. [6] [7]

The final units as issued to MCSOCOM Det-1 are the Kimber ICQBs with SureFire Integrated Military Pistol Light (IMPL), Dawson Precision rail, Gemtech TRL Tactical Retention Lanyards based upon the jury-rigged telephone cord versions, modified Safariland 6004 holsters, Simonich G-10 Gunner Grips manufactured by Simonich Knives (Strider Knives had previously replaced the original Pachmayr rubber grips), and Wilson Combat's '47D' 8-round magazines. [8] [9]

Tritium Novak LoMount sights replaced the originals which were made in-house by the Marines. [8] [9]

Other Custom models

Other models of Kimber Custom include the following:

Kimber has also produced several higher-end full-sized model 1911 pistols that are closely based on the Custom, but are not considered part of the Custom line due to their additional features and higher price. These include the following:

See also

References

  1. Johnston, Gary Paul. Shooting Times review of the Kimber Custom LAPD SWAT model Archived 2007-04-27 at the Wayback Machine
  2. "Holton, Christopher. "The .45 makes a comeback during the war on terrorism", WorldTechTribune, April 5, 2004". Archived from the original on December 24, 2013. Retrieved March 21, 2007.
  3. Arnold, David W. Handguns review of the Kimber Custom LAPD SWAT model Archived 2007-02-25 at the Wayback Machine
  4. Johnston, Gary Paul. "One Good Pistol: The Kimber MCSOCOM ICQB", Military.com
  5. Johnston, Gary Paul. "Kimber's Custom Covert", Soldier of Fortune, December 3, 2007 Archived December 13, 2007, at the Wayback Machine
  6. ""Desert Warrior, Kimber's Newest .45 ACP", Kimber press release, May 17, 2005". Archived from the original on March 7, 2008. Retrieved March 26, 2008.
  7. Johnston, Gary Paul. "Kimber's Warriors", Soldier of Fortune, September 5, 2006 Archived January 20, 2008, at the Wayback Machine
  8. 1 2 Rogers, Patrick A (1 May 2001). "Strong Men Armed: The Marine Corps 1st Force Reconnaissance Company Part III Section 2". The Accurate Rifle. 4 (4): 47. Archived from the original on 22 December 2017. Retrieved 4 March 2007.
  9. 1 2 Rogers, Patrick A.(2003)"Marines New SOCOM Pistol", SWAT Magazine, December 2003, 52-57
  10. Wilson, Jim. "Kimber Stainless Target II .38 Super", Shooting Times Archived 2008-02-09 at the Wayback Machine