Related Research Articles
Corning Incorporated is an American multinational technology company that specializes in specialty glass, ceramics, and related materials and technologies including advanced optics, primarily for industrial and scientific applications. The company was named Corning Glass Works until 1989. Corning divested its consumer product lines in 1998 by selling the Corning Consumer Products Company subsidiary to Borden.
LOMO is a manufacturer of medical and motion-picture lenses and equipment based in St. Petersburg, Russia. The company was awarded three Order of Lenin decorations by the Soviet Union.
Keyence Corporation is a direct sales organization that develops and manufactures automation sensors, vision systems, barcode readers, laser markers, measuring instruments, and digital microscopes.
An optical fiber connector joins optical fibers, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all, about 100 different types of fiber optic connectors have been introduced to the market.
Multi-mode optical fiber is a type of optical fiber mostly used for communication over short distances, such as within a building or on a campus. Multi-mode links can be used for data rates up to 100 Gbit/s. Multi-mode fiber has a fairly large core diameter that enables multiple light modes to be propagated and limits the maximum length of a transmission link because of modal dispersion. The standard G.651.1 defines the most widely used forms of multi-mode optical fiber.
An optical fiber, or optical fibre in Commonwealth English, is a flexible, transparent fiber made by drawing glass (silica) or plastic to a diameter slightly thicker than that of a human hair. Optical fibers are used most often as a means to transmit light between the two ends of the fiber and find wide usage in fiber-optic communications, where they permit transmission over longer distances and at higher bandwidths than electrical cables. Fibers are used instead of metal wires because signals travel along them with less loss; in addition, fibers are immune to electromagnetic interference, a problem from which metal wires suffer. Fibers are also used for illumination and imaging, and are often wrapped in bundles so they may be used to carry light into, or images out of confined spaces, as in the case of a fiberscope. Specially designed fibers are also used for a variety of other applications, some of them being fiber optic sensors and fiber lasers.
Light tubes are structures that transmit or distribute natural or artificial light for the purpose of illumination and are examples of optical waveguides.
Sumitomo Electric Industries, Ltd. is a manufacturer of electric wire and optical fiber cables. Its headquarters are in Chūō-ku, Osaka, Japan. The company's shares are listed in the first section of the Tokyo, Nagoya Stock Exchanges, and the Fukuoka Stock Exchange. In the period ending March 2021, the company reported consolidated sales of US$26,5 billion.
A fiber-optic cable, also known as an optical-fiber cable, is an assembly similar to an electrical cable but containing one or more optical fibers that are used to carry light. The optical fiber elements are typically individually coated with plastic layers and contained in a protective tube suitable for the environment where the cable is used. Different types of cable are used for optical communication in different applications, for example long-distance telecommunication or providing a high-speed data connection between different parts of a building.
Peter C. Schultz, Ph.D., is co-inventor of the fiber optics now used worldwide for telecommunications. He is retired President of Heraeus Tenevo Inc., a $200 million technical glass manufacturer specializing in fiber optics and semiconductor markets, and retired Chief Technical Officer North America for Heraeus Holding GmbH.
An optical power meter (OPM) is a device used to measure the power in an optical signal. The term usually refers to a device for testing average power in fiber optic systems. Other general purpose light power measuring devices are usually called radiometers, photometers, laser power meters, light meters or lux meters.
Megger Group Limited is a British manufacturing company that manufactures electronic test equipment and measuring instruments for electrical power applications.
Future Fibre Technologies (FFT) is a fiber optic sensing technologies company based in Melbourne, Australia, with its US head office in Mountain View, California, Middle East head office in Dubai, Indian head office in New Delhi and European head office in London. Founded in 1994, Future Fibre Technologies product line provides optical fiber intrusion detection systems for perimeters, buried oil and gas pipelines and data communication networks.
Qualitrol is a condition monitoring technology company headquartered in Fairport, New York. Qualitrol manufacturers and distributes partial discharge monitoring, asset protection equipment and information products for the electrical generation, transmission and distribution industries.
Keysight Technologies, or Keysight, is an American company that manufactures electronics test and measurement equipment and software. The name is a blend of key and insight. The company was formed as a spin-off of Agilent Technologies, which inherited and rebranded the test and measurement product lines developed and produced from the late 1960s to the turn of the millennium by Hewlett-Packard's Test & Measurement division.
Thomas O. Mensah is a Ghanaian-American chemical engineer and inventor who contributed to the development of fiber optic manufacturing and nanotechnology. He has 14 patents, and was inducted into the US National Academy of Inventors in 2015. In 2017, Dr. Mensah served as Editor-in-Chief of the textbook Nanotechnology Commercialization, published by John Wiley & Sons.
OFS is an American technology company known for designing and manufacturing fiber optic solutions. Since the mid-2010s, the company's headquarters in Norcross, Georgia was used as a film studio.
Anwar Chitayat is the founder and former CEO and chairman of Anorad Corp., which was acquired in 1998 by Rockwell Automation. Mr. Chitayat holds over 95 patents in Electronics, Semiconductors and Automation including Nanotechnology, Interferometry and Linear motors. His achievements in High technology were honored by SEMI at their highest honor for Lifetime Achievement, reserved for individuals who repeatedly enable and lead the technology industry throughout their professional career. In the year 1997, Anwar was awarded the Entrepreneur of the year award by Ernst and Young, and in the year 2009, Anwar was inducted to Long Island Hall of Fame for his impacts on science and technology on Long Island.
HFCL Limited is an Indian technology company, based in Gurugram, India. It designs, develops, manufactures Telecommunications equipment, Fiber-optic cables and other related electronics.
BWD Electronics was an Australian manufacturer of electronics test equipment, based in Melbourne, Victoria, best known for their range of oscilloscopes.
References
- 1 2 3 Ministry for manufacturing and export (12 May 2005). "Media release: Two Scoresby manufacturers enter hall of fame". Department of Premier and Cabinet, Victoria, Australia. Archived from the original on 27 November 2012. Retrieved 9 June 2012.
- ↑ "Kingfisher. Fiber optic instrument manufacturers". Kingfisher International. Archived from the original on 7 September 2013. Retrieved 10 June 2012.
Our...factory is located in Scoresby, about 1 hour from Tullamarine airport.
- ↑ World Optical Light Source (OLS) Market Report, Frost & Sullivan 2007
- ↑ World Optical Loss Test Set (OLTS) Market Report, Frost & Sullivan 2007
- ↑ World Optical Power Meter (OPM) Market Report, Frost & Sullivan 2007
- 1 2 3 Garry Barker (28 July 2007). "Kingfisher's vision finds global results. Business". The Age . Retrieved 10 June 2012.
- 1 2 3 "Kingfisher International world's first achievements". Kingfisher International. Archived from the original on 7 September 2013. Retrieved 10 June 2012.
1991. Moved out of garage, into a small factory based in Rowville.
- 1 2 3 4 "Biography: Rosmin Robertson. Managing director, Kingfisher International" (PDF). NICTA. May 2007. Retrieved 24 June 2012.
- ↑ http://www.exportawards.gov.au/Home-Awards/default.aspx%7C Export Awards[ dead link ]
- ↑ "Business Victoria - Manufacturing - Previous Inductees". www.business.vic.gov.au. Archived from the original on 9 March 2011.
- ↑ "Media Release: Victorian ICT company wins international achievement". Minister for Information and Communication Technology, Victoria. 10 March 2005. Archived from the original on 27 November 2012. Retrieved 24 June 2012.