LSAT rifle

Last updated
LSAT Rifle
LSAT Carbine.jpg
Type Assault rifle
Place of originUnited States
Production history
Designer AAI Corporation and ARES, Inc.
Designed2008 onwards [1]
Manufacturer TBD
ProducedEarliest: 2011 [2]
Variants2 Polymer-cased ammunition firing variants
2 Caseless ammunition firing variants
Specifications
Cartridge LSAT polymer-cased ammunition
LSAT caseless ammunition
Caliber 5.56 mm (At present) [2]
Action Gas-piston; push-through feed-and-ejection [2]
Feed systemSpring-fed magazines [1]
Weapon-powered, spring-less magazines [1]
Sightsoptical, involving advanced tracking and acquisition [3]

The LSAT rifle, of the LSAT (Lightweight Small Arms Technologies) program, is a developmental assault rifle. Design began in 2008, [1] four years after the beginning of the LSAT program. Like the LSAT LMG, the rifle is designed to be significantly lighter than existing designs, and is designed to fire lighter ammunition. [1] Like the rest of the program, the weapon extensively uses parallel development. [1] It has designs for polymer-cased ammunition and caseless ammunition, and designs using spring-loading magazines and weapon-powered magazines. [1] This parallel development reduces the risk of the program failing. [1] Computer simulation and modelling, particularly of the LMG, is being used for all components of the program, including the rifle. [1] This reduces both time and expenditure for prototyping and testing. The other program components use a 'spiral development' approach, [1] whereby the product is rolled out in stages or 'spirals', each stage producing a new version that is an improvement on those from previous spirals; the rifle shall likely use the same approach. The weapon and the program are closely connected to the Future Force Warrior concept, [4] with aims to integrate electronics and computerized optics, [3] and aims to increase the mobility of soldiers. The weapon is also intended to improve on reliability and ease of maintenance. [1]

Contents

Design Requirements

Various new designs for infantry drove the requirement for the standard rifle to be lighter. New uses of information technology and future concepts (such as the Future Force Warrior) require lighter equipment. Notably, when extra weight from advanced, computerized optical sights is introduced, the weapon needs to be made lighter to compensate. New strategic concepts require greater infantry mobility to be fully realized. Making the LSAT rifle lighter is the most essential innovation of development. Other improvements are also important. The weapon is being designed with the integration of electronics and advanced optics in mind. [1] The reliability of the current M16 and M4 compared with rifles using gas pistons has led many to call for the former weapons to be replaced. A highly reliable gas-system is important for the LSAT rifle. Improved reliability of the rifle in general is a likely requirement, similar to the improved reliability objective for the LSAT LMG.

Design Progress

The rifle design began with seventeen concepts; however, after the concepts were investigated and trade-offs were analysed, only two remained for the cased round, and two for the caseless round. [1] The two designs for each ammunition type revolve around two magazine approaches. One uses the standard mechanism, with springs inside the magazine feeding rounds into the weapon; [1] the other uses a 'weapon powered' approach, [1] presumably to reduce the extra weight and space that springs create in magazines. Both magazine designs are focused around high capacity. The rifle designs are undergoing the same simulated, structural, and kinematic analyses as the LMG. [1] Both a working rifle and accompanying ammunition prototypes have been made, but it uncertain if or when the program will result in a new rifle for the US military.

On 14 May 2014, Textron Systems was awarded a two-year $5.7 million contract for work that included development of a carbine firing cased-telescoped ammunition. [5]

See also

Related Research Articles

<span class="mw-page-title-main">Squad automatic weapon</span> Portable light machine gun

A squad automatic weapon (SAW), also known as a section automatic weapon or light support weapon (LSW), is a man-portable automatic firearm attached to infantry squads or sections as a source of rapid direct firepower. Weapons fulfilling this role can be light machine guns, or modified selective-fire rifles fitted with a heavier barrel, bipod and a belt/drum-fed design.

<span class="mw-page-title-main">XM29 OICW</span> Assault rifle with bullpup grenade launcher module

The XM29 OICW was a series of prototypes of a new type of assault rifle that fired 20 mm HE airbursting projectiles. The prototypes were developed as part of the Objective Individual Combat Weapon program in the 1990s. The term SABR was also used at certain points, but is less common.

<span class="mw-page-title-main">Objective Individual Combat Weapon</span> US Army rifle development competition

The Objective Individual Combat Weapon or OICW was the next-generation service rifle competition that was under development as part of the United States Army OICW program; the program was eventually discontinued without bringing the weapon out of the prototype phase. The acronym OICW is often used to refer to the entire weapons program.

<span class="mw-page-title-main">Light machine gun</span> Machine gun for an individual soldier

A light machine gun (LMG) is a light-weight machine gun designed to be operated by a single infantryman, with or without an assistant, as an infantry support weapon. LMGs firing cartridges of the same caliber as the other riflemen of the same combat unit are often referred to as squad automatic weapons.

<span class="mw-page-title-main">Heckler & Koch G11</span> Caseless ammunition assault rifle prototype

The Heckler & Koch G11 is a non-production prototype assault rifle developed from the late 1960s–1980s by Gesellschaft für Hülsenlose Gewehrsysteme (GSHG), a conglomeration of companies headed by firearm manufacturer Heckler & Koch, Dynamit Nobel, and Hensoldt Wetzlar. The rifle is noted for its use of caseless ammunition.

<span class="mw-page-title-main">Caseless ammunition</span> Type of weapon-cartridge

Caseless ammunition (CL), or caseless cartridge, is a configuration of weapon-cartridge that eliminates the cartridge case that typically holds the primer, propellant and projectile together as a unit. Instead, the propellant and primer are fitted to the projectile in another way so that a cartridge case is not needed, for example inside or outside the projectile depending on configuration.

The Special Purpose Individual Weapon (SPIW) was a long-running United States Army program to develop, in part, a flechette-firing "rifle", though other concepts were also involved. The concepts continued to be tested under the Future Rifle Program and again in the 1980s under the Advanced Combat Rifle program, but neither program resulted in a system useful enough to warrant replacing the M16.

<span class="mw-page-title-main">Medium machine gun</span> Usually refers to a belt-fed automatic firearm firing a full-power rifle cartridge

A medium machine gun (MMG), in modern terms, usually refers to a belt-fed machine gun firing a full-powered rifle cartridge, and is considered "medium" in weight. Medium machine guns are light enough to be infantry-portable, but still cumbersome enough to require a crew for optimal operational efficiency.

The Advanced Combat Rifle (ACR) was a United States Army program, started in 1986, to find a replacement for the M16 assault rifle. Under the stress of battle the average soldier with an M16 may shoot a target at 45 meters, but hit probability is reduced to one out of ten shots on target by 220 meters. Because of this, the ACR program was initiated in the late 1980s to create a weapon that could double the hit probability. The ACR program was preceded by older programs such as the Special Purpose Individual Weapon. The program ended in 1990 after an expenditure of approximately US$300 million.

The Advanced Individual Combat Weapon (AICW) was an Australian prototype combination assault rifle and grenade launcher developed as a technology demonstrator. The AICW combined a standard 5.56 mm assault rifle based on the successful F88 Austeyr with a superposed load grenade launcher developed by Metal Storm.

The Colt Automatic Rifle or Colt Light Machine Gun is a 5.56 mm NATO, open-bolt, full-automatic-only firearm developed by Colt Defense. It is based on the M16A2/A4, and has a distinctive squared-off handguard, vertical grip, carrying handle and integrated bipod.

Ares Incorporated is an American weapons manufacturer and firearms engineering company co-founded by the American weapons inventor and developer Eugene Stoner in 1971. The company is based in Port Clinton, Ohio, and produces fire control systems, turret systems, small arms, automatic cannons and industrial machinery. Mr. Stoner left the company in 1989, joining Knight's Armament Company in 1990, where his designs included the Stoner 96, a further refinement of the Ares LMG/Stoner 63.

The Lightweight Small Arms Technologies (LSAT) program is funded by the U.S. Joint Service Small Arms Program, with the goal of significantly reducing the weight of small arms and their ammunition. Following a series of military programs to investigate advances in small arms, the LSAT program is the US military's latest project to replace existing US small arms. Tactical concepts and the research from the previous small arms programs indicates that lightening small arms is the first significant step towards increasing soldiers' lethality and survivability.

<span class="mw-page-title-main">LSAT light machine gun</span> American light machine gun

The LSAT light machine gun is a component of the Lightweight Small Arms Technologies (LSAT) program. The purpose of the program was to develop a lighter, yet highly reliable light machine gun (LMG). The program was initiated in 2004, when the Joint Service Small Arms Program (JSSAP) challenged the American defence industry to develop a lighter small arms and also design lighter ammunition.

LSAT may refer to:

<span class="mw-page-title-main">LSAT caseless ammunition</span> Type of caseless ammunition

LSAT caseless ammunition is caseless ammunition produced as part of the U.S. Army’s Lightweight Small Arms Technologies (LSAT) program.

<span class="mw-page-title-main">M249 light machine gun</span> Light machine gun

The M249 SAW, formally the Light Machine Gun, 5.56 mm, M249, is the United States Armed Forces adaptation of the Belgian FN Minimi, a light machine gun manufactured by FN Herstal (FN).

<span class="mw-page-title-main">Telescoped ammunition</span> Type of Ammunition

Telescoped ammunition is an ammunition design in which the projectile is partially or completely enveloped by the propellant. Examples include ammunition for both hand weapons and artillery. Caseless ammunition is often telescoped.

<span class="mw-page-title-main">Polymer-cased ammunition</span>

Polymer-cased ammunition (PCA) is firearm ammunition (cartridge) with casings made from synthetic polymer instead of the typical metallic casing. PCA is considered a new alternative that potentially reduces production cost and weight for long guns and handguns.

<span class="mw-page-title-main">Next Generation Squad Weapon</span> U.S. military program to develop small arms

The Next Generation Squad Weapon (NGSW) program is a United States military program created in 2017 by the U.S. Army to replace the 5.56mm M4 carbine, the M249 SAW light machine gun, and the 7.62mm M240 machine gun, with a common system of 6.8mm cartridges and to develop small arms fire-control systems for the new weapons.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Spiegel, Kori; Paul Shipley (21 May 2008). "Lightweight Small Arms Technologies" (PDF). International Infantry & Joint Services Small Arms Systems Symposium. National Defense Industrial Association. Archived from the original (PDF) on 1 May 2017.
  2. 1 2 3 Bruce, Robert. "LSAT The Future of Small Arms Now?". American Rifleman . National Rifle Association of America. Archived from the original on 24 January 2009.
  3. 1 2 "Descriptive Summaries of the Research, Development, Test and Evaluation Army Appropriation, Budget Activities 1, 2 and 3". Office of the Secretary of the Army. February 2007. Archived from the original on 21 April 2009. Retrieved 9 September 2017.
  4. Spiegel, Kori; Paul Shipley. "Lightweight Small Arms Technologies" (PDF). Army Science Conference. Archived from the original (PDF) on 24 April 2009. Retrieved 9 November 2008.
  5. Textron Systems' Light Armaments Team to Develop Lightweight, Cased-Telescoped Small Arms for U.S. Army Archived 28 October 2017 at the Wayback Machine - Marketwatch.com, 14 May 2014