Law of multiple proportions

Last updated

John Dalton John Dalton.jpeg
John Dalton

In chemistry, the law of multiple proportions states that in compounds which contain two particular chemical elements, the amount of Element A per measure of Element B will differ across these compounds by ratios of small whole numbers. For instance, the ratio of the hydrogen content in methane and ethane per measure of carbon is 2:3. This law is also known as Dalton's Law, named after John Dalton, the chemist who first expressed it. The discovery of this pattern led Dalton to develop the modern theory of atoms, as it suggested that the elements combine with each other in multiples of a basic quantity.

Contents

The law of multiple proportions often does not apply when comparing very large molecules. For example, if one tried to demonstrate it using the hydrocarbons decane (chemical formula C10H22) and undecane (C11H24), one would find that 100 grams of carbon could react with 18.46 grams of hydrogen to produce decane or with 18.31 grams of hydrogen to produce undecane, for a ratio of hydrogen masses of 121:120, which is hardly a ratio of "small" whole numbers.

History

In 1804, Dalton explained his atomic theory to his friend and fellow chemist Thomas Thomson, who published an explanation of Dalton's theory in his book A System of Chemistry in 1807. According to Thomson, Dalton's idea first occurred to him when experimenting with "olefiant gas" (ethylene) and "carburetted hydrogen gas" (methane). Dalton found that "carburetted hydrogen gas" contains twice as much hydrogen per measure of carbon as "olefiant gas", and concluded that a molecule of "olefiant gas" is one carbon atom and one hydrogen atom, and a molecule of "carburetted hydrogen gas" is one carbon atom and two hydrogen atoms. [1] In reality, an ethylene molecule has two carbon atoms and four hydrogen atoms (C2H4), and a methane molecule has one carbon atom and four hydrogen atoms (CH4). In this particular case, Dalton was mistaken about the formulas of these compounds, and it wasn't his only mistake. But in other cases, he got their formulas right. The following examples come from Dalton's own books A New System of Chemical Philosophy (in two volumes, 1808 and 1817):

Example 1 — tin oxides: Dalton identified two types of tin oxide. One is a grey powder that Dalton referred to as "the protoxide of tin", which is 88.1% tin and 11.9% oxygen. The other is a white powder which Dalton referred to as "the deutoxide of tin", which is 78.7% tin and 21.3% oxygen. Adjusting these figures, in the grey powder there is about 13.5 g of oxygen for every 100 g of tin, and in the white powder there is about 27 g of oxygen for every 100 g of tin. 13.5 and 27 form a ratio of 1:2. These compounds are known today tin(II) oxide (SnO) and tin(IV) oxide (SnO2). In Dalton's terminology, a "protoxide" is a molecule containing a single oxygen atom, and a "deutoxide" molecule has two. [2] [3] Tin oxides are actually crystals, they don't exist in molecular form.

Example 2 — iron oxides: Dalton identified two oxides of iron. There is one type of iron oxide that is a black powder which Dalton referred to as "the protoxide of iron", which is 78.1% iron and 21.9% oxygen. The other iron oxide is a red powder, which Dalton referred to as "the intermediate or red oxide of iron" which is 70.4% iron and 29.6% oxygen. Adjusting these figures, in the black powder there is about 28 g of oxygen for every 100 g of iron, and in the red powder there is about 42 g of oxygen for every 100 g of iron. 28 and 42 form a ratio of 2:3. These compounds are iron(II) oxide (Fe2O2) [lower-alpha 1] and iron(III) oxide (Fe2O3). [4] [5] Dalton described the "intermediate oxide" as being "2 atoms protoxide and 1 of oxygen", which adds up to two atoms of iron and three of oxygen. That averages to one and a half atoms of oxygen for every iron atom, putting it midway between a "protoxide" and a "deutoxide". [6] As with tin oxides, iron oxides are crystals.

Example 3 — nitrogen oxides: Dalton was aware of three oxides of nitrogen: "nitrous oxide", "nitrous gas", and "nitric acid". [7] These compounds are known today as nitrous oxide, nitric oxide, and nitrogen dioxide respectively. "Nitrous oxide" is 63.3% nitrogen and 36.7% oxygen, which means it has 80 g of oxygen for every 140 g of nitrogen. "Nitrous gas" is 44.05% nitrogen and 55.95% oxygen, which means there are 160 g of oxygen for every 140 g of nitrogen. "Nitric acid" is 29.5% nitrogen and 70.5% oxygen, which means it has 320 g of oxygen for every 140 g of nitrogen. 80 g, 160 g, and 320 g form a ratio of 1:2:4. The formulas for these compounds are N2O, NO, and NO2. [8] [9]

The earliest definition of Dalton's observation appears in an 1807 chemistry encyclopedia:

...where two bodies combine in different proportions, if the quantity of one of them be assumed as a fixed number, the proportions of the other body that unite to it are in the simplest possible ratio to each other, being produced by multiplying the lowest proportion by a simple integral number as 2, 3, 4, &c. [...] in all cases the simple elements of bodies are disposed to unite atom to atom singly; or if either is in excess, it exceeds by a ratio to be expressed by some simple multiple of the number of its atoms. [10]

Dalton's atomic theory garnered widespread interest but not universal acceptance shortly after he published it because the law of multiple proportions by itself was not complete proof of the existence of atoms. Over the course of the 19th century, other discoveries in the fields of chemistry and physics would give atomic theory more credence, such that by the end of the 19th century it had found universal acceptance.

Footnotes

  1. Iron(II) oxide's formula is written here as "Fe2O2" rather than the more conventional "FeO" because this better illustrates the explanation.
  1. Thomas Thomson (1831). A History of Chemistry, Volume 2. p. 291
  2. Dalton (1817). A New System of Chemical Philosophy vol. 2, p. 36
  3. Melsen (1952). From Atomos to Atom. p. 137
  4. Dalton (1817). A New System of Chemical Philosophy vol. 2, p. 28-34: "the intermediate or red oxide is 2 atoms protoxide and 1 of oxygen"
  5. Millington (1906). John Dalton, p. 113
  6. Dalton (1817). A New System of Chemical Philosophy vol. 2. pp. 2, 34, 39, 72, 79
  7. Dalton (1808). A New System of Chemical Philosophy vol. 1, pp. 316–319
  8. Dalton (1808). A New System of Chemical Philosophy vol. 1. pp. 316–319
  9. Holbrow et al. (2010). Modern Introductory Physics, pp. 65–66
  10. Arthur & Charles Rochemont Aikin (1807). A Dictionary of Chemistry and Mineralogy. volume 2, pages 11-12

Bibliography

Related Research Articles

<span class="mw-page-title-main">Atom</span> Smallest unit of a chemical element

Atoms are the basic particles of the chemical elements. An atom consists of a nucleus of protons and generally neutrons, surrounded by an electromagnetically bound swarm of electrons. The chemical elements are distinguished from each other by the number of protons that are in their atoms. For example, any atom that contains 11 protons is sodium, and any atom that contains 29 protons is copper. Atoms with the same number of protons but a different number of neutrons are called isotopes of the same element.

<span class="mw-page-title-main">History of atomic theory</span> History of atomic physics

Atomic theory is the scientific theory that matter is composed of particles called atoms. The concept that matter is ultimately composed of discrete particles is an ancient idea, but the concept gained scientific credence from the beginning of the 19th century when scientists found it could explain how the chemical elements reacted with each other. In more specific terms, the atom was defined as the basic particle of a chemical element. By the end of the 19th century, the atomic theory had gained full acceptance in the scientific community. It is one of the most important scientific discoveries in history.

In chemistry, a chemical formula is a way of presenting information about the chemical proportions of atoms that constitute a particular chemical compound or molecule, using chemical element symbols, numbers, and sometimes also other symbols, such as parentheses, dashes, brackets, commas and plus (+) and minus (−) signs. These are limited to a single typographic line of symbols, which may include subscripts and superscripts. A chemical formula is not a chemical name since it does not contain any words. Although a chemical formula may imply certain simple chemical structures, it is not the same as a full chemical structural formula. Chemical formulae can fully specify the structure of only the simplest of molecules and chemical substances, and are generally more limited in power than chemical names and structural formulae.

<span class="mw-page-title-main">Diatomic molecule</span> Molecule composed of any two atoms

Diatomic molecules are molecules composed of only two atoms, of the same or different chemical elements. If a diatomic molecule consists of two atoms of the same element, such as hydrogen or oxygen, then it is said to be homonuclear. Otherwise, if a diatomic molecule consists of two different atoms, such as carbon monoxide or nitric oxide, the molecule is said to be heteronuclear. The bond in a homonuclear diatomic molecule is non-polar.

<span class="mw-page-title-main">Haber process</span> Main process of ammonia production

The Haber process, also called the Haber–Bosch process, is the main industrial procedure for the production of ammonia. The German chemists Fritz Haber and Carl Bosch developed it in the first decade of the 20th century. The process converts atmospheric nitrogen (N2) to ammonia (NH3) by a reaction with hydrogen (H2) using an iron metal catalyst under high temperatures and pressures. This reaction is slightly exothermic (i.e. it releases energy), meaning that the reaction is favoured at lower temperatures and higher pressures. It decreases entropy, complicating the process. Hydrogen is produced via steam reforming, followed by an iterative closed cycle to react hydrogen with nitrogen to produce ammonia.

In chemistry, the law of definite proportions, sometimes called Proust's law or the law of constant composition, states that a given chemical compound always contains its component elements in fixed ratio and does not depend on its source and method of preparation. For example, oxygen makes up about 8/9 of the mass of any sample of pure water, while hydrogen makes up the remaining 1/9 of the mass: the mass of two elements in a compound are always in the same ratio. Along with the law of multiple proportions, the law of definite proportions forms the basis of stoichiometry.

<span class="mw-page-title-main">Molecule</span> Electrically neutral group of two or more atoms

A molecule is a group of two or more atoms held together by attractive forces known as chemical bonds; depending on context, the term may or may not include ions which satisfy this criterion. In quantum physics, organic chemistry, and biochemistry, the distinction from ions is dropped and molecule is often used when referring to polyatomic ions.

<span class="mw-page-title-main">Nitrogen</span> Chemical element, symbol N and atomic number 7

Nitrogen is a chemical element; it has symbol N and atomic number 7. Nitrogen is a nonmetal and the lightest member of group 15 of the periodic table, often called the pnictogens. It is a common element in the universe, estimated at seventh in total abundance in the Milky Way and the Solar System. At standard temperature and pressure, two atoms of the element bond to form N2, a colorless and odorless diatomic gas. N2 forms about 78% of Earth's atmosphere, making it the most abundant uncombined element in air. Because of the volatility of nitrogen compounds, nitrogen is relatively rare in the solid parts of the Earth.

<span class="mw-page-title-main">Oxide</span> Chemical compound where oxygen atoms are combined with atoms of other elements

An oxide is a chemical compound containing at least one oxygen atom and one other element in its chemical formula. "Oxide" itself is the dianion of oxygen, an O2– ion with oxygen in the oxidation state of −2. Most of the Earth's crust consists of oxides. Even materials considered pure elements often develop an oxide coating. For example, aluminium foil develops a thin skin of Al2O3 that protects the foil from further oxidation.

<span class="mw-page-title-main">Stoichiometry</span> Calculation of relative weights of reactants and products in chemical reactions

Stoichiometry is the relationship between the weights of reactants and products before, during, and following chemical reactions.

<span class="mw-page-title-main">John Dalton</span> British chemist and physicist (1766–1844)

John Dalton was an English chemist, physicist and meteorologist. He introduced the atomic theory into chemistry. He also researched colour blindness, which he had; as a result, colour blindness is known as Daltonism in several languages.

A period 2 element is one of the chemical elements in the second row of the periodic table of the chemical elements. The periodic table is laid out in rows to illustrate recurring (periodic) trends in the chemical behavior of the elements as their atomic number increases; a new row is started when chemical behavior begins to repeat, creating columns of elements with similar properties.

<span class="mw-page-title-main">Nitric oxide</span> Colorless gas with the formula NO

Nitric oxide is a colorless gas with the formula NO. It is one of the principal oxides of nitrogen. Nitric oxide is a free radical: it has an unpaired electron, which is sometimes denoted by a dot in its chemical formula. Nitric oxide is also a heteronuclear diatomic molecule, a class of molecules whose study spawned early modern theories of chemical bonding.

<span class="mw-page-title-main">Amount of substance</span> Extensive physical property

In chemistry, the amount of substance (symbol n) in a given sample of matter is defined as a ratio (n = N/NA) between the number of elementary entities (N) and the Avogadro constant (NA). The entities are usually molecules, atoms, or ions of a specified kind. The particular substance sampled may be specified using a subscript, e.g., the amount of sodium chloride (NaCl) would be denoted as nNaCl. The unit of amount of substance in the International System of Units is the mole (symbol: mol), a base unit. Since 2019, the value of the Avogadro constant NA is defined to be exactly 6.02214076×1023 mol−1. Sometimes, the amount of substance is referred to as the chemical amount or, informally, as the "number of moles" in a given sample of matter.

In chemistry, the valence or valency of an atom is a measure of its combining capacity with other atoms when it forms chemical compounds or molecules. Valence is generally understood to be the number of chemical bonds that each atom of a given chemical element typically forms. Double bonds are considered to be two bonds, triple bonds to be three, quadruple bonds to be four, quintuple bonds to be five and sextuple bonds to be six. In most compounds, the valence of hydrogen is 1, of oxygen is 2, of nitrogen is 3, and of carbon is 4. Valence is not to be confused with the related concepts of the coordination number, the oxidation state, or the number of valence electrons for a given atom.

In chemistry, isotopologues are molecules that differ only in their isotopic composition. They have the same chemical formula and bonding arrangement of atoms, but at least one atom has a different number of neutrons than the parent.

<span class="mw-page-title-main">Non-stoichiometric compound</span> Chemical compounds that cannot be represented by an empirical formula

Non-stoichiometric compounds are chemical compounds, almost always solid inorganic compounds, having elemental composition whose proportions cannot be represented by a ratio of small natural numbers ; most often, in such materials, some small percentage of atoms are missing or too many atoms are packed into an otherwise perfect lattice work.

<span class="mw-page-title-main">Chemical substance</span> Matter of constant chemical composition and properties

A chemical substance is a unique form of matter with constant chemical composition and characteristic properties. Chemical substances may take the form of a single element or chemical compounds. If two or more chemical substances can be combined without reacting, they may form a chemical mixture. If a mixture is separated to isolate one chemical substance to a desired degree, the resulting substance is said to be chemically pure.

Factitious airs was a term used for synthetic gases which emerged around 1670 when Robert Boyle coined the term upon isolating what is now understood to be hydrogen. Factitious means "artificial, not natural", so the term means "man-made gases".

Pauling's principle of electroneutrality states that each atom in a stable substance has a charge close to zero. It was formulated by Linus Pauling in 1948 and later revised. The principle has been used to predict which of a set of molecular resonance structures would be the most significant, to explain the stability of inorganic complexes and to explain the existence of π-bonding in compounds and polyatomic anions containing silicon, phosphorus or sulfur bonded to oxygen; it is still invoked in the context of coordination complexes. However, modern computational techniques indicate many stable compounds have a greater charge distribution than the principle predicts.