Calvin Forrest Quate was one of the inventors of the atomic force microscope. He was a professor emeritus of Applied Physics and Electrical Engineering at Stanford University.
David J. Smith is a Regents' Professor of physics at Arizona State University. He is an Australian experimental physicist and his research is focussed on using the electron microscope to study the microstructure of different materials. He is a pioneer in high-resolution relectron microscopy technique and is very well known in his field. His interests are focused on thin films, nanostructures, novel materials and magnetism.
Inspec is a major indexing database of scientific and technical literature, published by the Institution of Engineering and Technology (IET), and formerly by the Institution of Electrical Engineers (IEE), one of the IET's forerunners.
Spinmechatronics is neologism referring to an emerging field of research concerned with the exploitation of spin-dependent phenomena and established spintronic methodologies and technologies in conjunction with electro-mechanical, magno-mechanical, acousto-mechanical and opto-mechanical systems. Most especially, spinmechatronics concerns the integration of micro- and nano- mechatronic systems with spin physics and spintronics.
In microscopy, conductive atomic force microscopy (C-AFM) or current sensing atomic force microscopy (CS-AFM) is a mode in atomic force microscopy (AFM) that simultaneously measures the topography of a material and the electric current flow at the contact point of the tip with the surface of the sample. The topography is measured by detecting the deflection of the cantilever using an optical system, while the current is detected using a current-to-voltage preamplifier. The fact that the CAFM uses two different detection systems is a strong advantage compared to scanning tunneling microscopy (STM). Basically, in STM the topography picture is constructed based on the current flowing between the tip and the sample. Therefore, when a portion of a sample is scanned with an STM, it is not possible to discern if the current fluctuations are related to a change in the topography or to a change in the sample conductivity.
Amit Goyal is a SUNY Distinguished Professor and a SUNY Empire Innovation Professor at SUNY-Buffalo. He leads the Laboratory for Heteroepitaxial Growth of Functional Materials & Devices. He is also Director of the New York State Center of Excellence in Plastics Recycling Research & Innovation, an externally funded center with initial funding of $4.5M for three years at SUNY-Buffalo. He is the founding director of the multidisciplinary and transdisciplinary RENEW Institute at SUNY-Buffalo in Buffalo, New York and served as director from 2015-2021. RENEW is an internally funded research institute at SUNY-Buffalo. For his contributions to UB, in 2019, he was awarded the University at Buffalo or SUNY-Buffalo President's Medal, which recognizes “outstanding scholarly or artistic achievements, humanitarian acts, contributions of time or treasure, exemplary leadership or any other major contribution to the development of the University at Buffalo and the quality of life in the UB community.” This is one of the highest recognitions given at the university.
Satish K. Tripathi is an Indian-American academic, a computer scientist and academic administrator. He is the first foreign-born president of the University at Buffalo (UB), the flagship of the State University of New York (SUNY) system. Previously, he served as provost of University at Buffalo from 2004 to 2011. From 1997-2004, Tripathi served as dean of the Bourns College of Engineering at University of California, Riverside.
The University at Buffalo School of Engineering and Applied Sciences, or UB Engineering, is the largest public engineering school in the state of New York and is home to eight departments. Established in 1946, UB Engineering is ranked 59th by U.S. News & World Report and has an annual research expenditure of $72 million.
Bruce Alvin Gurney was an American physicist responsible for pioneering advances in magnetic recording. In particular, he was central to the development of the giant magnetoresistance (GMR) sensors first used in hard disk drives in 1997.
Lina J. Karam is a Lebanese-American electrical and computer engineer and inventor. She is an IEEE Fellow. Her areas of work span digital signal processing, image/video processing, compression/coding and transmission, computer vision, machine learning/deep learning, perceptual-based visual processing, and automated mobility. She served as an expert delegate of the ISO/IEC JTC1/SC29 Committee and participated in JPEG/MPEG standardization activities. She served as expert consultant in matters related to Intellectual Property (IP)/Patent Litigation, Image/Video Compression and Streaming, Image/Video Processing, Computer Vision, Machine Learning, and Autonomous Driving.
Kannan M. Krishnan is an Indian-American academic, author and entrepreneur. He is a Professor of Materials Science and Engineering, an Adjunct Professor of Physics, and an Associate Faculty of the South Asia Centre, at the University of Washington, Seattle (UW).
Alexandra Boltasseva is Ron And Dotty Garvin Tonjes Distinguished Professor of electrical and computer engineering at Purdue University, and editor-in-chief for The Optical Society's Optical Materials Express journal. Her research focuses on plasmonic metamaterials, manmade composites of metals that use surface plasmons to achieve optical properties not seen in nature.
Leslie Ying is an American biomedical engineering scientist in the field of medical imaging. She is the Clifford C. Furnas Professor of Biomedical Engineering and Electrical Engineering at University at Buffalo, The State University of New York. Ying is the Editor-in-Chief of IEEE Transactions on Medical Imaging and is also an American Institute for Medical and Biological Engineering (AIMBE) Fellow.
Shamima Karim Choudhury is a Bangladeshi physicist, academician, researcher, and women-in-science advocate. She retired as a Professor from the Department of Physics, University of Dhaka on 30 June 2016 after 44 years of teaching and research. She supervised more than 70 Masters and MPhil students in Physics. She is a Fellow of Bangladesh Physical Society. She is a member of OWSD, IOP and many national science societies. She is the team Leader of WIP in Bangladesh. She worked as the Provost of Rokeya Hall and as Director of the Bose Centre for Advanced Study and Research in Natural Sciences at Dhaka University.
Sara A. Majetich is an American physicist and Professor of Physics at Carnegie Mellon University. Her work considers magnetic nanoparticles and nanostructures for application in spintronic devices. She is a Fellow of the American Physical Society and the Institute of Electrical and Electronics Engineers.
Paras Nath Prasad is an Indian chemist. He is the SUNY Distinguished Professor at the University at Buffalo and holds a tenured faculty appointment in the department of Chemistry. In addition, he also holds non-tenured appointments in Physics, Medicine, and Electrical Engineering at the University at Buffalo and serves as the Executive Director of the Institute for Lasers, Photonics and Biophotonics.
Supriyo Bandyopadhyay is an Indian-born American electrical engineer, academic and researcher. He is Commonwealth Professor of Electrical and Computer Engineering at Virginia Commonwealth University, where he directs the Quantum Device Laboratory.
Xiuling Li is a distinguished electrical and computer engineering professor in the field of nanostructured semiconductor devices. She is currently the Temple Foundation Endowed Professorship No. 3 in Electrical and Computer Engineering and Fellow of the Dow Professor in Chemistry at the University of Texas at Austin. Previously, she was a Donald Biggar Willet Professor in Electrical and Computer Engineering and Interim Director of the Nick Holonyak Jr. Micro and Nanotechnology Laboratory at the University of Illinois at Urbana-Champaign.
Thomas George Thundat is an Indian-American scientist. He is currently the SUNY Distinguished Professor and a SUNY Empire Innovation Professor of Chemical & Biological Engineering at the University at Buffalo. Thundat conducts research in the field of nanosensors and microcantilevers.
