LifeStraw is a brand of water filtration and purification devices. The original LifeStraw was designed as a portable water filter "straw". It filters a maximum of 4,000 litres of water, enough for one person for three years. It removes almost all waterborne bacteria, microplastics and parasites. [1] A bottle was later developed which incorporated a LifeStraw cartridge into a 650-millilitre (22 US fl oz) BPA-free plastic sports water bottle. [2] In addition to these portable filters, the manufacturer produces high-volume purifiers powered by gravity that also remove viruses. These are designed for family and community use. [3]
The water filters are designed by the Swiss-based Vestergaard Frandsen. While originally developed for people living in developing nations and for distribution in humanitarian crisis, the filters have gained popularity as consumer products. The device is now used as a tool for survivalists and outdoor enthusiasts in addition to being used to help combat clean water scarcity worldwide. The filters can provide clean water without the need for batteries or chemical treatment. They are made using hollow fiber membrane technology. Some of them also incorporate an activated carbon component.
Contrary to popular belief, the original device does not incorporate a reverse-osmosis membrane nor is it able to filter out salts or minerals. [4]
The devices were distributed in the 2010 Haiti earthquake, 2010 Pakistan floods, 2011 Thailand floods, and 2016 Ecuador earthquake, among other crises and initiatives. In the Mutomo District in Kenya which has suffered from long term drought, the Kenya Red Cross supplied filters to 3,750 school children and 6,750 households. [5] In 2015, they were deployed in Rwanda. [6] The company funds a retail give back program that as of 2018 has provided safe water to more than 1 million school children in rural Kenya. [7]
The original LifeStraw is a plastic tube 22 centimetres (8+5⁄8 in) long and 3 centimetres (1+1⁄8 in) in diameter. [8] Water that is drawn up through the straw first passes through hollow fibres that filter water particles down to 0.2 µm across, using only physical filtration methods and no chemicals. The entire process is powered by suction, similar to using a conventional drinking straw, and filters up to 4,000 litres (1,100 US gal) of water. [9]
While the initial model of the filter did not remove Giardia lamblia , [10] current models remove a minimum of 99.999% of waterborne protozoan parasites including Giardia and Cryptosporidium . [11] The original device does not filter viruses, chemicals, salt water, and heavy metals, [12] but newer versions of the product, (like LifeStraw Flex or LifeStraw Home) [13] are capable of removing chemicals and heavy metals including lead.
LifeStraw has been generally praised for its effective and quick method of bacteria and protozoa removal and consumer acceptability. [14]
Although the devices are available for retail sale in the developed world, the majority are distributed as part of public health campaigns or in response to complex emergencies by NGOs and organizations that give them away for free in the developing world. [15]
LifeStraw has been praised in the international media and won several awards including the 2008 Saatchi & Saatchi Award for World Changing Ideas, the 'INDEX: 2005' International Design Award and "Best Invention of 2005" by Time Magazine . [16] It was featured in the Museum of Modern Art in New York. [17] In 2019, the Lifestraw Home water filter pitcher was launched and won the IDEA design award [18] and the Red Dot design award. [19]
Filtration is a physical separation process that separates solid matter and fluid from a mixture using a filter medium that has a complex structure through which only the fluid can pass. Solid particles that cannot pass through the filter medium are described as oversize and the fluid that passes through is called the filtrate. Oversize particles may form a filter cake on top of the filter and may also block the filter lattice, preventing the fluid phase from crossing the filter, known as blinding. The size of the largest particles that can successfully pass through a filter is called the effective pore size of that filter. The separation of solid and fluid is imperfect; solids will be contaminated with some fluid and filtrate will contain fine particles. Filtration occurs both in nature and in engineered systems; there are biological, geological, and industrial forms.
Water purification is the process of removing undesirable chemicals, biological contaminants, suspended solids, and gases from water. The goal is to produce water that is fit for specific purposes. Most water is purified and disinfected for human consumption, but water purification may also be carried out for a variety of other purposes, including medical, pharmacological, chemical, and industrial applications. The history of water purification includes a wide variety of methods. The methods used include physical processes such as filtration, sedimentation, and distillation; biological processes such as slow sand filters or biologically active carbon; chemical processes such as flocculation and chlorination; and the use of electromagnetic radiation such as ultraviolet light.
Water treatment is any process that improves the quality of water to make it appropriate for a specific end-use. The end use may be drinking, industrial water supply, irrigation, river flow maintenance, water recreation or many other uses, including being safely returned to the environment. Water treatment removes contaminants and undesirable components, or reduces their concentration so that the water becomes fit for its desired end-use. This treatment is crucial to human health and allows humans to benefit from both drinking and irrigation use.
A water filter removes impurities by lowering contamination of water using a fine physical barrier, a chemical process, or a biological process. Filters cleanse water to different extents, for purposes such as: providing agricultural irrigation, accessible drinking water, public and private aquariums, and the safe use of ponds and swimming pools.
Sand filters are used as a step in the water treatment process of water purification.
Wilderness-acquired diarrhea is a variety of traveler's diarrhea in which backpackers and other outdoor enthusiasts are affected. Potential sources are contaminated food or water, or "hand-to-mouth", directly from another person who is infected. Cases generally resolve spontaneously, with or without treatment, and the cause is typically unknown. The National Outdoor Leadership School has recorded about one incident per 5,000 person-field days by following strict protocols on hygiene and water treatment. More limited, separate studies have presented highly varied estimated rates of affliction that range from 3 percent to 74 percent of wilderness visitors. One survey found that long-distance Appalachian Trail hikers reported diarrhea as their most common illness. Based on reviews of epidemiologic data and literature, some researchers believe that the risks have been over-stated and are poorly understood by the public.
CamelBak Products, LLC is an American outdoor equipment company based in Petaluma, California, best known for its hydration products, such as hydration packs and water bottles. CamelBak is also a supplier of protective gear and other products to the U.S. military.
Portable water purification devices are self-contained, easily transported units used to purify water from untreated sources for drinking purposes. Their main function is to eliminate pathogens, and often also of suspended solids and some unpalatable or toxic compounds.
Swimming pool sanitation is the process of ensuring healthy conditions in swimming pools. Proper sanitation is needed to maintain the visual clarity of water and to prevent the transmission of infectious waterborne diseases.
An industrial filter press is a tool used in separation processes, specifically to separate solids and liquids. The machine stacks many filter elements and allows the filter to be easily opened to remove the filtered solids, and allows easy cleaning or replacement of the filter media.
ClimateCare is a profit for purpose environmental and social impact company known for its role providing carbon offset services, with a particular focus on using carbon and other results based finance to support its 'Climate+Care Projects'. It also provides businesses and governments with sustainable development programmes, environmental and social impact measurement and project development.
The LifeSaver bottle is a portable water purification device. The bottle filters out objects larger than 15 nanometres.
Slingshot is a water purification device created by inventor Dean Kamen. Powered by a Stirling engine running on a combustible fuel source, it claims to be able to produce drinking water from almost any source by means of vapor compression distillation, requires no filters, and can operate using cow dung as fuel.
A vacuum ceramic filter is designed to separate liquids from solids for dewatering of ore concentrates purposes. The device consists of a rotator, slurry tank, ceramic filter plate, distributor, discharge scraper, cleaning device, frame, agitating device, pipe system, vacuum system, automatic acid dosing system, automatic lubricating system, valve and discharge chute. The operation and construction principle of vacuum ceramic filter resemble those of a conventional disc filter, but the filter medium is replaced by a finely porous ceramic disc. The disc material is inert, has a long operational life and is resistant to almost all chemicals. Performance can be optimized by taking into account all those factors which affect the overall efficiency of the separation process. Some of the variables affecting the performance of a vacuum ceramic filter include the solid concentration, speed rotation of the disc, slurry level in the feed basin, temperature of the feed slurry, and the pressure during dewatering stages and filter cake formation.
Copper zinc water filtration is a high-purity brass water filtration process that relies on the redox potential of dissolved oxygen in water in the presence of a zinc anode and copper cathode. It uses dissolved impurities within water as constituent substrate, which are reduced to more physiologically inert compounds.
Raw water is water found in the environment that has not been treated and does not have any of its minerals, ions, particles, bacteria, or parasites removed. Raw water includes rainwater, ground water, water from infiltration wells, and water from bodies like lakes and rivers.
The history of water filters can be traced to the earliest civilisations with written records. Water filters have been used throughout history to improve the safety and aesthetics of water intended to be used for drinking or bathing. In modern times, they are also widely used in industry and commerce. The history of water filtration is closely linked with the broader history of improvements in public health.
Vestergaard is a company headquartered in Lausanne, Switzerland that manufactures public health tools for people in developing countries. Founded as Vestergaard Frandsen in 1957 as a uniform maker, the company evolved into a social enterprise making products for humanitarian aid in the 1990s. It is now best known for inventing the LifeStraw water filter and the PermaNet mosquito net.
Mutomo District was a former district in the Eastern Province of Kenya. Its population is 180,000. The administrative center of the district is Mutomo. In 2010, it was merged into Kitui County.
Diatomaceous earth (DE) filtration is a special filtration process that removes particles from liquids as it passes through a layer of fossilized remains of microscopic water organism called diatoms. These diatoms are mined from diatomite deposits which are located along the Earth's surface as they have accumulated in sediment of open and moving bodies of water. Obtained diatomaceous earth is then purified using acid leaching or liquid-liquid extraction in order for it to be used in any form of application. The process of D.E. filtration is composed of three main stages: pre-coating, body feed, and cleaning.