Rooster | |
---|---|
Role | Experimental, optionally powered biplane glider |
National origin | United Kingdom |
Designer | John M. Lee |
First flight | 1983 |
Retired | 1990 |
Number built | 1 |
The Lightwing Type 4 Rooster is an experimental biplane glider, capable of powered or unpowered flight, built in the UK in the 1980s to explore the properties of this unusual glider configuration.
The Rooster was not intended for production but to explore the soaring performance of a biplane. It is an unequal span biplane, not technically a sesquiplane but with a lower wing with 2/3 the span of the upper one. The aspect ratio of the latter is 10, that of the lower about 6.7 and both planes are unswept with constant chord. The wings are wood framed and fabric covered, with the lower ones mounted on the lower fuselage longerons and the upper on a short, thin pedestal from the fuselage top. There are two short, faired wing struts one each side, one from mid-fuselage to the upper wing another, crossing just ahead of the first, from the top of the pedestal to the lower wing. [1]
The fuselage of the Rooster is a simple, fabric covered rectangular structure, with a simple, straight edged, cruciform tail unit, the tailplane mounted just above the upper fuselage. The region around the upper wing pylon is faired in, just ahead of a mounting frame for the pusher engine. The fairing extends forwards to the back of the cockpit; originally, this was open but the surviving sole example currently has a single piece canopy. The Rooster has a fixed, conventional undercarriage with small, wing mounted mainwheels, assisted by a small tailskid and a sprung nose skid, reaching back under most of the cockpit. [1]
Following the first flight in 1983 John Lee tested the soaring capabilities of the Rooster with flights from 180 m (600 ft). By the Spring of 1984 he had made some 200 circuits and was going forwards with tests the aircraft's semi-aerobatic abilities. [1] He later turned to the development of his Type 6 monoplane [1] and the Rooster's registration was cancelled in 1990. [2]
Data from Jane's All The World's Aircraft 1984-85 [1]
General characteristics
Performance
The SZD-45 Ogar (Hound) is a T-tailed cantilever high-wing monoplane of wooden, aluminium and fibreglass construction designed and manufactured in Poland.
The Bartel BM 2, originally Bartel M.2 was a Polish biplane primary trainer aircraft prototype of 1926.
The PZL M-17 "Duduś Kudłacz" was a Polish twin-boom pusher general aviation and trainer aircraft of 1977, which remained a prototype.
The Custer CCW-5 was a twin-engined, 5-seat aircraft of pusher configuration, which used a channel wing claimed to enable low speed flight and short take-offs. Two CCW-5s flew, eleven years apart, but the type never entered production.
The Larson D-1 was an agricultural biplane that was purpose-built to replace Boeing Stearman cropdusters.
The ProFe D-8 Moby Dick is a family of Czech pusher configuration, parasol wing, strut-braced, V-tailed, motor gliders that was designed and produced by ProFe. The aircraft is named for the great white whale of Herman Melville's novel of the same name and was supplied as a kit for amateur construction.
The Air Est Goeland, sometimes called the Clavé Goéland, after the designer, is a French parasol-wing, T-tailed, single-seat motor glider that was designed by Robert Clavé and produced by Air Est Services of Marly, Moselle in kit form for amateur construction.
The Aeromarine AM-1 was a biplane built to pursue a US Air Mail Service requirement for a nighttime transport.
The EDRA Aeronautica Super Pétrel is an amphibious pusher configuration biplane, seating two side-by-side, brought into production in Brazil in 2002 though with French parentage. It remained in production in 2011, in kit and flyaway forms.
The Tisserand Hydroplum is a small amphibious aircraft with a single, pusher engine, built in France in the 1980s. Originally a single-seat, high-wing monoplane, it was developed into a two-seat biplane for production in kit form as the SMAN Pétrel.
The Aérostructure Lutin 80, earlier known as the PLM 80, is a small, single seat motor glider with a low power pusher configuration engine, designed and built in France in the 1980s. Only two were completed.
The Corcoran 65-1 was a motor glider of very unusual configuration, a twin engine biplane. It was designed and built in the United States in the 1960s; only two were completed.
The Albatros L.71 was a two-seat, single pusher engined biplane built in Germany in the 1920s.
The ViS Sprint is a pusher configuration, pod-and-boom two-seat ultralight, designed and built in the Ukraine in the mid-2000s. It can serve as an agricultural spraying aircraft.
The Kortenbach & Rauh Kora 1 was an unusual twin boom, pusher configuration motor glider, designed and built in Germany in the 1970s and intended as a training aircraft.
The Aviad Zigolo MG12 is an Italian kitbuilt introductory motor-glider first flown in 2012. It has a small engine and limited gliding performance but is inexpensive to buy and run and simple to build and fly. Kit production began in 2013 and by the following year twenty had been sold.
The Rubik R-03 Szittya I was a Hungarian single-seat sailplane flown in the late 1930s. The design was developed through three improving variants. though only one of each was built.
The LAK-14 Strazdas (Thrush) was a 1980s primary glider designed and built by the Lithuanian Aircraft Construction factory. Like other LAK designs it developed the aeronautical use of glass fibre, foams and other novel materials. It was in production from 1981 to 1985.
The Politechnika Warszawska PW-4 Pelikan was a motor-glider variant of the two seat Polish PW-3 Bakcyl glider. Only one flew.
The 1929 Curtiss Model 53 Condor, also known as the Curtiss Model 53 Condor 18 or the Curtiss CO Condor, was a civil passenger version of the Model 52 Condor bomber. A twin-engined biplane, it carried 18 passengers.