Lockwood Aircam | |
---|---|
Role | Kit aircraft |
National origin | United States |
Manufacturer | Lockwood Aircraft |
Designer | Phil Lockwood |
First flight | 1995 |
Introduction | 1995 |
Status | In production |
Produced | 1995-present |
Number built | 250 (2019) [1] |
Developed from | Lockwood Drifter |
The Lockwood Aircam (also called the Air Cam and AirCam) is a high-wing, twin engine pusher configuration aircraft with conventional landing gear, based on the single engine Lockwood Drifter and sold in kit form by Lockwood Aircraft. The open-cockpit aircraft seats two in tandem. As of 2019, 250 Aircams were licensed and flying. [1] In 2019, a complete kit with Rotax 912ULS engines, less instruments, paint, shipping and crating was priced at US$128,990. [2] [3] [4] [5]
The first prototype Aircam was built in 1995. Designed by Phil Lockwood, founder of Lockwood Aircraft, it was built for the National Geographic Society for research and photography in the Ndoki Rain Forest in the northern Congo Basin. It was built to fly low and slow and to provide a wide, unobstructed view, with the additional security of a second engine. The design has since been improved while retaining the same layout. [4] [5] [6] [7]
The initial version, produced by Leza-Lockwood Corporation, was powered by twin Rotax 582 powerplants of 64 hp (48 kW) each. Twin 80 hp (60 kW) Rotax 912 and 115 hp (86 kW) 914 engines were optional. Later, the 582 was eliminated, the 912 engine became standard and Leza-Lockwood's name was changed to Lockwood. [4] [7] [8] In 2015, an optional bubble canopy kit was introduced. [9] The aircraft can also be configured with floats to become amphibious. [10]
The Aircam was designed to be able to take off on one engine if needed, and the positioning of the engines close to the centerline contributes to this capability as well as its benign single engine handling. [7] [8]
The Aircam has a landing roll of 300 feet and a takeoff roll of under 200 feet. [11]
The United States National Transportation Safety Board (NTSB) lists eight accidents involving Aircams between 1993 and February 2010. In these eight accidents, there was one fatality, one serious injury, one minor injury and seven people uninjured. [12]
Jack Roush of NASCAR team Roush Fenway Racing nearly lost his life after the Aircam he was flying struck a power line and sank in a lake near Troy, Alabama in April 2002. He was saved in a dramatic rescue by retired U.S. Marine Larry Hicks. [13]
Data from Lockwood Aircraft website [11]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.
The Blue Yonder Twin Engine EZ Flyer is a Canadian designed and built, pusher configuration twin-engined, tandem two-seat, open cockpit aircraft provided as a completed aircraft or in kit form by Blue Yonder Aviation.
The Rans S-6 Coyote II is an American single-engined, tractor configuration, two-seat, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Coyote is available in kit form for amateur construction or as a completed light-sport aircraft.
The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.
The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.
The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.
The Fisher Dakota Hawk is a Canadian side-by-side two-seat, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders.
The Kolb Mark III is a family of American side-by-side two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky, and intended for amateur construction.
The Circa Reproductions Nieuports are a family of Canadian 7/8 scale World War I sesquiplane aircraft replicas designed by Graham Lee of Lamont, Alberta for amateur construction from plans sold by Lee's company Circa Reproductions. Leading Edge Air Foils of Peyton, Colorado at one time also made construction kits available. Lee's Nieuports were among the earliest First World War replicas available and paved the way for later companies to produce plans and kits for a great variety of warbirds.
The Loehle Sport Parasol is an American single-seat, parasol winged, single engine, ultralight aircraft produced in kit form by Loehle Aircraft for amateur construction. The aircraft meets the requirements of the US FAR 103 Ultralight Vehicles regulations.
The Rans S-7 Courier is an American single-engined, tractor configuration, two-seats in tandem, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Courier is available in kit form for amateur construction or as a completed light-sport aircraft.
The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The Quicksilver GT500 is a family of American strut-braced, high-wing, pusher configuration, tricycle gear aircraft built by Quicksilver Aeronautics of Temecula, California. The aircraft is available as a kit for amateur construction or as a completed ready-to-fly aircraft.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The US Aviation Cumulus is an American low-wing, single-seat, open cockpit motor glider that was designed by Dave Ekstrom and produced by US Aviation, supplied in kit form for amateur construction.
The Slepcev Storch is a Serbian type-certified, kit and ultralight STOL aircraft, designed by Yugoslavian-Australian Nestor Slepcev and currently produced by Storch Aircraft Serbia in several different versions. The ultralight version is a 3/4 scale replica of the Fieseler Fi 156 Storch of the Second World War and is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.