M-Squared Breese

Last updated
M-Squared Breese
BreeseFlight.jpg
Breese 2
Role Kit aircraft
National origin United States
Manufacturer M-Squared Aircraft
DesignerPaul Mather
First flight1996
Introduction1996
StatusIn production
Developed from Eipper Quicksilver

The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction. [1] [2] [3] [4] [5] [6] [7] [8]

Contents

Design and development

The M-Squared line of aircraft was started in 1996 when a former Quicksilver Manufacturing employee, Paul Mather, decided to offer retrofit kits to convert the Quicksilver II from cable-braced wings to a strut-braced configuration with jury struts. The kits proved popular and Mather expanded to market complete aircraft based on the basic Quicksilver layout. The first two aircraft in the series were the two-seat double surface wing Sport 1000 and the two-seat single surface wing Sprint 1000. [1] [2]

The series all share similar construction featuring a bolted aluminium tube structure with the flying surfaces covered in pre-sewn Dacron sailcloth envelopes. All models are open-cockpit, but some have optional streamlined pods available. All models use tricycle landing gear and steerable nosewheels. [1]

The Breese 2 DS and SS have been accepted by the US Federal Aviation Administration as approved special light-sport aircraft. [9] [10]

Variants

Sport 1000
Two seats in side-by-side configuration, double surface sailcloth wing, based on the Quicksilver MX Sport II. The construction time from the assembly kit is reported as 75 hours. Standard engine is the 64 hp (48 kW) Rotax 582, with the 80 hp (60 kW) Rotax 912 optional. The now out-of-production 74 hp (55 kW) Rotax 618 was at one time an optional engine, as well. Other options include streamlined cockpit pod, wheel pants and extra fuel tankage. In production. [1] [3] [4] [5] [6] [7] [8]
Sprint 1000
Two seats in side-by-side configuration, designed for the US experimental amateur-built category, 64 hp (48 kW) Rotax 582 two-stroke powerplant, 1,400 lb (635 kg) gross weight, single surface sailcloth wing. In production. [1] [4] [5] [7] [8] [11]
Sprint 1000 FP
Two-seat amphibious floatplane designed for the US experimental amateur-built category, 100 hp (75 kW) Rotax 912ULS four-stroke powerplant, 1,400 lb (635 kg) gross weight, single surface sailcloth wing, 1650 Full Lotus floats. In production. [12]
Breese XL
Single-seat aircraft designed for the US FAR 103 Ultralight Vehicles category, 28 hp (21 kW) Hirth F33 two-stroke or the 35 hp (26 kW) Revolution Rotary 301 powerplant, 550 lb (249 kg) gross weight, single surface sailcloth wing. In production. [13]
Breese 2 SS, with single surface wing M-Squared Breese 2.jpg
Breese 2 SS, with single surface wing
Breese 2 SS
Two-seat aircraft designed for the US light-sport aircraft category, 64 hp (48 kW) Rotax 582 two-stroke powerplant, 1,320 lb (599 kg) gross weight, single surface sailcloth wing. In production. [7] [8] [14]
M-Squared Breese 2 DS M-Squared Breese II.JPG
M-Squared Breese 2 DS
Breese 2 DS
Two-seat aircraft designed for the US light-sport aircraft category, 64 hp (48 kW) Rotax 582 two-stroke powerplant, 1,320 lb (599 kg) gross weight, double surface sailcloth wing. In production. [7] [14]
Breese DS
Single-seat aircraft designed for the US experimental amateur-built aircraft category, 40 hp (30 kW) Rotax 447 or 50 hp (37 kW) Rotax 503 two-stroke powerplant, 650 lb (295 kg) gross weight, double surface sailcloth wing. In production. [4] [5] [6] [7] [8] [11] [15]
Breese SS
Single-seat aircraft designed for the US experimental amateur-built aircraft category, 40 hp (30 kW) Rotax 447 or 50 hp (37 kW) Rotax 503 two-stroke powerplant, 650 lb (295 kg) gross weight, double surface sailcloth wing. In production. [4] [5] [7] [8] [11]
Ultra-X
Single-seat aircraft designed for the US experimental amateur-built aircraft category, 80 hp (60 kW) Rotax 680 two-stroke powerplant, 900 lb (408 kg) gross weight, double surface sailcloth wing, with a symmetrical airfoil. In production. [11]
American Tugz
Single-seat aircraft designed for the US experimental amateur-built aircraft category, 80 hp (60 kW) Rotax 680 two-stroke powerplant, 900 lb (408 kg) gross weight, single surface sailcloth wing, designed for towing hang gliders aloft. In production. [11]

Specifications (Sport 1000)

Data from Cliche [1] and M-Squared [16]

General characteristics

Performance

Avionics

Related Research Articles

Lockwood Drifter

The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.

CGS Hawk

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

Team Mini-Max Hi-MAX

The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.

Kolb Firestar

The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

Carlson Sparrow

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

Titan Tornado

The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio for amateur construction.

SlipStream Genesis

The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.

The J & J Ultralights Tukan is an American ultralight trike that was marketed by J & J Ultralights, Leading Edge Air Foils and Kemmeries Aviation. The aircraft was supplied as a kit, as parts and as plans for amateur construction.

Antares MA-32

The Antares MA-32 is the first model in a large family of Ukrainian ultralight trikes that is designed and produced by Antares Aircraft and at one time marketed by Leading Edge Air Foils as the LEAF Antares. The aircraft are supplied as kits for amateur construction.

The Apex Eco 6 is the first of a family of Czech single and two seat flying wing ultralight trikes that were designed and produced by To-Mi Aviation and later by Apex Aviation. The aircraft were supplied as kits for amateur construction.

Airborne Edge

The Airborne Edge is a line of Australian two-seat ultralight trikes designed and produced by Airborne Windsports of Redhead, New South Wales. The aircraft are supplied as a completed aircraft and not as a kit.

The LiteWing Aircraft LiteTrike, also called The Lite Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied fully assembled.

The LiteWing Aircraft LiteWing, also called the Lite Wing Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied as a kit for amateur construction.

Mainair Blade

The Mainair Blade is a British ultralight trike that was designed and produced by Mainair Sports and later P&M Aviation. The aircraft was supplied as a completed aircraft.

The Mainair Rapier is a British flying wing ultralight trike that was designed and produced by Mainair Sports and later P&M Aviation. The aircraft was supplied as a completed aircraft or as a kit for amateur construction, followed by a factory inspection prior to flight.

North Wing Maverick

The North Wing Maverick is an American single-seat flying wing ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

The North Wing Apache is an American two-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.

Sabre Wildcat

The Sabre Wildcat is one of a series of American two-seat ultralight trikes that was designed by Richard Helm and produced by Sabre Aircraft. The aircraft were all supplied complete and ready-to-fly.

The J & J Ultralights Seawing is an American amphibious ultralight trike that was designed and produced by J & J Ultralights of Live Oak, Florida. The aircraft was supplied as a kit for amateur construction or as a complete aircraft.

References

  1. 1 2 3 4 5 6 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-104. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. 1 2 M-Squared Aircraft (n.d.). "About Us" . Retrieved 15 February 2011.
  3. 1 2 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 206. BAI Communications. ISBN   0-9636409-4-1
  4. 1 2 3 4 5 Downey, Julia: 2001 Kit Aircraft Directory, Kitplanes, Volume 17, Number 12, December 2000, page 61-62. Kitplanes Acquisition Company. ISSN 0891-1851
  5. 1 2 3 4 5 Downey, Julia: 2002 Kit Aircraft Directory, Kitplanes, Volume 18, Number 12, December 2001, page 53-54. Kitplanes Acquisition Company. ISSN 0891-1851
  6. 1 2 3 Downey, Julia: 2005 Kit Aircraft Directory, Kitplanes, Volume 21, Number 12, December 2004, page 70. Belvoir Publications. ISSN 0891-1851
  7. 1 2 3 4 5 6 7 Downey, Julia: 2008 Kit Aircraft Directory, Kitplanes, Volume 24, Number 12, December 2007, page 61-62. Primedia Publications. ISSN 0891-1851
  8. 1 2 3 4 5 6 Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 60-61. Belvoir Publications. ISSN 0891-1851
  9. ↑ Federal Aviation Administration (26 September 2016). "SLSA Make/Model Directory" . Retrieved 6 March 2017.
  10. ↑ Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, page 67. Flying Pages Europe SARL, 2015. ISSN   1368-485X
  11. 1 2 3 4 5 M-Squared Aircraft (n.d.). "Experimental Aircraft". Archived from the original on 30 October 2010. Retrieved 15 February 2011.
  12. ↑ M-Squared Aircraft (n.d.). "Floatplanes". Archived from the original on 10 June 2011. Retrieved 15 February 2011.
  13. ↑ M-Squared Aircraft (n.d.). "Breese XL". Archived from the original on 14 July 2011. Retrieved 15 February 2011.
  14. 1 2 M-Squared Aircraft (n.d.). "LSA". Archived from the original on 14 July 2011. Retrieved 15 February 2011.
  15. ↑ Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 64. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  16. ↑ M-Squared Aircraft (n.d.). "Sport 1000 Specifications". Archived from the original on 14 July 2011. Retrieved 15 February 2011.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.