Eipper Quicksilver | |
---|---|
General information | |
Type | Ultralight aircraft |
National origin | United States |
Manufacturer | Eipper Formance Eipper Aircraft Quicksilver Aircraft |
Designer | Bob Lovejoy |
Status | In production (2018) |
History | |
Developed from | Quicksilver hang glider |
Variants | M-Squared Breese Ultralight Engineering Astra Ultralite Soaring Wizard |
Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.
The earliest powered version, the Quicksilver C, was created as a self-launching hang glider, designed to allow pilots who lived in the flatlands to be able to self-launch without a hill. The design later evolved into an ultralight aircraft for powered cross-country flying. [1]
The aircraft line has been in production since the late 1970s and remains in production in 2018 by Quicksilver Aircraft of Temecula, California. [2] [3]
Founded by Dick Eipper, Eipper Formance began manufacturing the early Bob Lovejoy-designed Quicksilver ultralights in the late 1970s when hang gliding was very popular. The Quicksilver hang gliders differed from most hang gliders of that time period in that the Quicksilver had a rigid rectangular wing and a tail with a horizontal stabilizer and a rudder. At that time, the majority of hang gliders were simple Rogallo wing-type hang gliders. [1]
Eipper added a seat, wheels, and a small engine behind the wing of the hang glider, and the Quicksilver ultralight was born. This aircraft was controlled by pushing a bar forwards and backwards, and side to side, in the same way that hang gliders are controlled. This shifted the center of gravity of the aircraft and allowed the pilot to control the plane. Many pilots wanted an aircraft that was controlled with a stick and rudder, similar to the way "typical" light airplanes are controlled, so Eipper added rudder and elevator control surfaces to the Quicksilver ultralight, giving it two axes of control. This aircraft was called the Quicksilver MX. The high dihedral of the wings caused the plane to bank when the aircraft was turned with the rudder, but there was no direct means of controlling the roll axis of the airplane—the aircraft only rolled in response to the yaw axis. Pilots still wanted a true three-axis control ultralight, so Eipper added spoilerons. The spoilerons were only minimally effective, providing only a minimal amount of control over the roll axis. The next generation of MX had true ailerons which gave the aircraft full roll authority.[ citation needed ]
The single-seat Quicksilver MX not only complies with the US FAR 103 Ultralight Vehicles rules, but was in fact the aircraft around which the rules were developed. The Quicksilver was the most popular ultralight aircraft design when the regulations were first drafted in the early 1980s. [4]
The Quicksilver MX evolved over the years. A two-seat model was added for training purposes, although the two-seater was not legally an ultralight. Eipper Formance changed their name to Eipper Aircraft and then Quicksilver Aircraft, and they are still in business, although they are not producing aircraft in the quantity that they were at the height of the ultralight craze in the mid-1980s.[ citation needed ]
The current production MX Sports and Sprints are built from anodized aluminum tubing that is fastened together with bolts. The wings and tail are covered with pre-sewn Dacron envelopes. Reported construction times from the kit are 30–40 hours. [4]
In the summer of 1982, Peter Burgher modified a Quicksilver MX-1 with longer wings, larger fuel tanks, and modified carburetor jets flew from Utica, Michigan to St. Petersburg, Florida on an endurance flight setting 56 world and national records. [5]
Data from Quicksilver Ultralight.com [14]
General characteristics
Performance
Avionics
The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.
The Birdman Atlas is a single-seat, high wing, single engine in pusher configuration, ultralight aircraft that was based upon the Eipper Quicksilver design.
The InterPlane Skyboy is a two-seat, side-by-side, high wing, single engine, pusher configuration ultralight aircraft that was manufactured as a completed aircraft by InterPlane Aircraft of Zbraslavice, Czech Republic.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The UFM Easy Riser is an American swept wing biplane hang glider that was first powered in 1975, becoming the first modern ultralight aircraft. The Easy Riser was still in production as an unpowered glider in 2002 by Ultralight Flying Machines.
The Rotec Rally is a family of American ultralight aircraft that was designed by Bill Adaska in 1977 and produced by Rotec Engineering of Duncanville, Texas. Adaska had been an aeronautical engineer at Bell Helicopter and the French helicopter manufacturer, Aerospatiale, prior to starting Rotec. The aircraft was supplied as a kit for amateur construction.
The Ultralite Soaring Wizard is an American ultralight aircraft that was designed and produced by Ultralite Soaring Inc. The aircraft was supplied as a kit for amateur construction.
The Cosmos Phase II and Phase III are a series of French two-seat flying wing ultralight trikes that were produced by Cosmos ULM of Fontaine-lès-Dijon and now by Cosmos Ultralight of Puente de Ixtla, Mexico. The aircraft are supplied as factory completed aircraft and are not available as kits.
The Airborne Edge is a line of Australian two-seat ultralight trikes designed and produced by Airborne Windsports of Redhead, New South Wales. The aircraft are supplied as a completed aircraft and not as a kit.
The North Wing Apache is an American two-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.
The Aviate Raptor is a South African two-seat ultralight trike that was designed by Manfred Springer and produced by Aviate Products of Booysens. The aircraft was introduced in 1992 and supplied as a kit for amateur construction.
The Personal Flight Sky-Tender is an American ultralight trike flying boat that was designed and produced by Personal Flight of Chelan, Washington. Production is complete and the aircraft is no longer available.
The Para-Ski XS is a Canadian powered parachute that was designed and produced by Para-Ski of Mascouche, Quebec. The aircraft was supplied as a completed aircraft or as component kits for amateur construction.
The Para-Ski VX is a Canadian powered parachute that was designed and produced by Para-Ski of Mascouche, Quebec. The aircraft was supplied as a completed aircraft or as component kits for amateur construction.
The Apollo Delta Jet is a Hungarian ultralight trike, designed and produced by Apollo Ultralight Aircraft of Eger. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Apollo Jet Star is a Hungarian ultralight trike, designed and produced by Apollo Ultralight Aircraft of Eger. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Apollo Racer GT is a Hungarian ultralight trike, designed and produced by Apollo Ultralight Aircraft of Eger. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Krasniye Kryl'ya Deltacraft MD-50C is a Russian ultralight trike, designed and produced by Krasniye Kryl'ya of Taganrog. The aircraft is supplied as a complete ready-to-fly-aircraft.
The North Wing Sport X2 is an American ultralight trike, designed and produced by North Wing Design of Chelan, Washington. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
{{cite web}}
: CS1 maint: year (link){{cite web}}
: CS1 maint: year (link){{cite web}}
: CS1 maint: year (link)