Ultralight Engineering Astra

Last updated

Astra
Role Ultralight aircraft
National originUnited States
ManufacturerUltralight Engineering
StatusProduction completed
Developed from Eipper Quicksilver

The Ultralight Engineering Astra (English: Star) is an American high-wing, tricycle landing gear, cable-braced, single-seat, open cockpit, single engine in pusher configuration, ultralight aircraft that was designed and produced by Ultralight Engineering in the 1980s. The aircraft was supplied as a kit for amateur construction. [1]

Contents

Design and development

The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The Astra's standard empty weight is 248 lb (112 kg). Like many ultralights of the early 1980s, it was derived from the Eipper Quicksilver and generally resembles that aircraft. The Astra primarily improved upon the Quicksilver in its main landing gear design, which is suspended by coil springs to reduce the chances of damage during rough landings. [1]

The airframe is made from bolted-together aluminium tubing and covered in Dacron sailcloth. The 33 ft (10.1 m) span wing is braced by cables from a kingpost. The controls are three-axis, with roll controlled by three small spoilers mounted on each wing. The standard factory supplied engine was the Rotax 377 of 35 hp (26 kW) and it is mounted on the trailing edge of the wing, with the propeller in between the four tailboom tubes. The aircraft can be assembled or disassembled for storage or ground transportation by two people in fifteen minutes. [1]

Ultralight Engineering went out of business after the fatal crash of a prototype of another design and production of the Astra ended at the same time. [1]

Specifications (Astra)

Data from Cliche [1]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Eipper Quicksilver</span> American ultralight aircraft

Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.

<span class="mw-page-title-main">Fisher Avenger</span> Canadian ultralight aircraft

The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.

The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.

<span class="mw-page-title-main">M-Squared Breese</span> Type of aircraft

The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.

The Brock Avion is an American ultralight aircraft that was designed and produced by Ken Brock Manufacturing, a company usually noted for its gyroplanes. The Avion was supplied as a kit for amateur construction.

The Aircore Cadet is an American ultralight aircraft that was designed by Jim Scott and produced by Aircore Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Advanced Aviation Husky, Hi-Nuski and Coyote are a family of American ultralight aircraft that was designed and produced by Advanced Aviation. The aircraft was supplied as a kit for amateur construction and introduced in 1978.

<span class="mw-page-title-main">Rotec Rally</span> Type of aircraft

The Rotec Rally is a family of American ultralight aircraft that was designed by Bill Adaska in 1977 and produced by Rotec Engineering of Duncanville, Texas. Adaska had been an aeronautical engineer at Bell Helicopter and the French helicopter manufacturer, Aerospatiale, prior to starting Rotec. The aircraft was supplied as a kit for amateur construction.

The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.

The Skye Treck Skyseeker is a Canadian ultralight aircraft that was designed and produced by Skye Treck of Manitoba. The aircraft was supplied as a kit for amateur construction.

The Eastern Ultralights Snoop is a family of American ultralight aircraft that was designed by Bob Able and produced by Eastern Ultralights, starting in 1981. The aircraft was supplied as a kit for amateur construction.

The V-STOL Solution is an American ultralight aircraft that was designed by Dick Turner in 1998 and produced by V-STOL Aircraft. The aircraft was supplied as a kit for amateur construction.

The Star Flight Starfire is the first aircraft in a large family of American ultralight aircraft that was designed by Dick Turner and produced by Star Flight Manufacturing, introduced in 1979. The aircraft were all supplied as kits for amateur construction.

The Ultra-Fab Sundowner, also called the Sundowner Convertible, is an American ultralight aircraft that was designed by Bob Leinen and produced by Ultra-Fab. The aircraft was supplied as a kit for amateur construction.

The Teratorn T/A is an American ultralight aircraft that was designed and produced by Teratorn Aircraft. The aircraft was supplied as a kit for amateur construction.

The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Aerodyne Systems Vector</span> American ultralight aircraft

The Aerodyne Systems Vector is a family of American ultralight aircraft that was designed by Berndt Petterson, Mike McCarron and Paul Yarnell and produced by Aerodyne Systems, introduced in 1982. The aircraft was supplied as a kit for amateur construction.

The Mountaineer Trikes Mite-Lite is a family of American flying wing ultralight trikes that was designed and produced by Mountaineer Trikes. The aircraft were supplied as a kit for amateur construction.

The Concept Prowler is an American ultralight trike that was designed and produced by Concept Aviation of Knoxville, Tennessee.

The Sunward STB is a Chinese amphibious ultralight trike, designed and produced by Sunward Tech of Zhuzhou. The aircraft is supplied complete and ready-to-fly.

References

  1. 1 2 3 4 5 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-2. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.