Avid Champion | |
---|---|
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Avid Aircraft |
Designer | Dean Wilson |
First flight | 1998 |
Introduction | 1998 |
Status | Kits no longer available after November 2003 |
Developed from | Avid Mark IV |
The Avid Champion is an American single-seat, high-wing ultralight aircraft that was produced starting in 1998 as a kit by Avid Aircraft of Caldwell, Idaho, later Ennis, Montana. [1] [2] [3]
Avid Aircraft went out of business in November 2003 and the aircraft kits are no longer available. [4]
The Champion was created by scaling down the Avid Mark IV and narrowing the wider fuselage into a single-seat design intended to comply with the US FAR 103 Ultralight Vehicles category. [1] [5]
The design is a conventional tractor configuration, featuring tube and aircraft fabric construction. The factory-welded fuselage uses 4130 chromoly steel tubing. The aluminum wing spars are predrilled and die-drawn, to support prebuilt birch plywood ribs, covered with doped Dacron fabric. The cockpit is usually left uncovered. [1] [3] [5]
The main landing gear is bungee-suspended and includes a steerable tailwheel. Like other Avid designs, the wing has an under-cambered airfoil, Junkers style ailerons and scalloped trailing edges. The wing can be folded for storage and the aircraft can be towed on its wheels behind a car. The wing folding mechanism does not include automatic connecting ailerons. The cockpit will accommodate a pilot up to 6.5 ft (2.0 m) in height and 300 lb (136 kg) in weight. Two door options were originally available, a Piper J-3 Cub-style horizontally split door or an overhead-hinged door. [1] [3] [5]
The Champion only meets the US FAR 103 ultralight vehicle category maximum empty weight limit of 254 lb (115 kg), with the lightest of single cylinder, two-stroke engines installed, such as the 28 hp (21 kW) Rotax 277 and the removal of the cowling, brakes, doors and most of the instruments. When the kit was available, the company did not provide an engine for it, leaving the choice of engines and compliance with FAR 103 restrictions up to the owner. The standard empty weight with the 40 hp (30 kW) Rotax 447 powerplant was 284 lb (129 kg). The aircraft qualifies as an amateur-built in many countries including the US and Canada. [1] [5]
Building time to complete the kit was reported by the company to be 160 hours. When the aircraft was introduced in 1998, the kit cost was US$8995, without an engine. Complete airframes, also without an engine, were available for US$12,995. [2]
Andre Cliche's flight review of the Champion describes it as "light and responsive" and "agile", but cautions that the Junkers full-span ailerons produce high roll rates and high adverse yaw. He also indicated that "the overall responsiveness and taildragger reactions might tax beginners' capabilities." [1] Ultralight reviewer Dan Johnson concurred. [5]
Jim Bethea of UltraFlight magazine said: "The Champion is arguably the best fixed-wing ultralight available and perhaps the most overlooked." [3]
With the Rotax 447 engine, the aircraft can take-off in under 100 ft (30 m), as one owner explained: "You'd better be ready when you advance the throttle because the plane will jump off the ground within the next three seconds!" Landings in crosswinds have been described as "easy with a forward slip and touchdown on one main wheel". A full rudder slip will produce a descent rate of 2000 feet per minute (10 m/s). [3]
Because the choice of engine installed was left up to the builder, a variety of engines has been used, including the Rotax 277, 447 and the 50 hp (37 kW) Rotax 503. [3]
Data from Cliche & KitPlanes [1] [2]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Weedhopper is an American high-wing, tractor configuration, tricycle gear, two-axis control ultralight aircraft originally developed by John Chotia during the height of the 1970s ultralight boom and introduced in 1977. When it was in production the aircraft was sold as a kit for amateur construction and could be assembled in 25-30 man-hours.
The Aero-Works Aerolite 103 is an American single seat, high-wing, pusher configuration ultralight aircraft, designed by Terry Raber and introduced by Aero-Works, Inc, of Millersburg, Ohio, in 1997. The aircraft's model number indicates that it was designed to comply with the Federal Aviation Administration FAR 103 ultralight rules.
The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996.
The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.
The Beaujon Enduro is a single-seat, American high-wing, pusher configuration ultralight aircraft. The Enduro was introduced in 1978 and remains available as plans from Beaujon Aircraft of Ardmore, Oklahoma.
The Beaujon Mach .07 is a single-seat, American high-wing, tractor configuration ultralight aircraft. The aircraft is available as plans from Beaujon Aircraft of Ardmore, Oklahoma.
The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.
The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.
The Chotia Gypsy is an American single engine, high-wing, conventional landing gear-equipped ultralight aircraft that was designed by John Chotia in 1980.
The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.
The Wings of Freedom Flitplane is an American single-seat, high-wing, single-engine ultralight aircraft that is available as a kit aircraft or as plans for amateur construction from Wings of Freedom of Hubbard, Ohio.
The Fisher FP-202 Koala is a Canadian single-seat high wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and outwardly resembles that design.
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States, but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-101 is an American single-seat, high-wing, conventional landing gear, tractor configuration single engine ultralight aircraft that was available in kit form from Lite Flite of South Webster, Ohio and later Fisher Flying Products of Edgeley, North Dakota.
The Freebird I is an American single-seat, high wing, tricycle gear, single engined pusher configuration ultralight kit aircraft designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina and later also produced by Pro Sport Aviation of Wingate, North Carolina.
The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.
The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.