Wood Sky Pup

Last updated

Wood Sky Pup
Role Ultralight aircraft
National origin United States
DesignerStephen K. Wood
First flight1980
Introduction1982
StatusPlans available
Produced1982-present
Number built350

The Wood Sky Pup is an American single-seat, high wing, cantilever, single engine, conventional landing gear ultralight aircraft that was designed by Stephen K. Wood [1] of Whitewater, Colorado for amateur construction. [2] [3] [4] [5] [6] [7]

Contents

Design and development

Introduced in 1982, the Sky Pup is a single seater designed as an FAR 103 Ultralight Vehicles compliant aircraft with an empty weight within that category's 254 lb (115 kg) empty weight limit. The aircraft was intended to require the minimum financial investment and the designer intended that the airframe would be able to be completed for US$1000 using locally available materials. Cliche reported in 2001 that Sky Pups had been completed for US$2000, including the engine. [2] [3] Its shape has been described as imitating the 1930s Aeronca C-2 "flying bathtub".

The airframe is constructed from Douglas fir and styrofoam, all covered in Dacron or polyester fabric. The wing is a three-piece design, allowing quick disassembly for transport or storage. The landing gear suspension is made from maple wood. The Sky Pup can be built with an open cockpit or fully enclosed, allowing flying in cooler weather. The Sky Pup is available as plans only. The power range specified is 18 to 28 hp (13 to 21 kW), with the largest engine specified the 28 hp (21 kW) Rotax 277. The 20 hp (15 kW) 2si 215, 28 hp (21 kW) Hirth F-33 and 22 hp (16 kW) Zenoah G-25 have also been used. [2] [3] [4] [8]

The design was professionally engineered and incorporates a very clean cantilever wing that results in a 12:1 glide ratio. The control system is two-axis, using only elevator and rudder controls, roll being introduced by rudder via a generous dihedral angle. The elevator is stick-controlled, while the rudder is controlled via conventional aircraft pedals. The aircraft is stall and spin proof. Reported construction times are 450–600 hours. [2] [3]

Plans were initially sold direct by the designer and, in the early 2000s, by the Vintage Ultra and Lightplane Association. Later the designer's son marketed the plans and this is the current source. [2] [3] [5] [6] [7]

Specifications (Sky Pup)

Data from Brochure, Cliche, and Kitplanes [1] [2] [5] [6] [7]

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related Research Articles

The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.

The Ameri-Cana Eureka is a Canadian designed and built low-wing, single seat, conventional landing gear-equipped ultralight aircraft that was produced as a kit by Ameri-Cana Ultralights of Irricana, Alberta between 1997 and 2003.

<span class="mw-page-title-main">Fisher FP-202 Koala</span> Canadian ultralight aircraft

The Fisher FP-202 Koala is a Canadian single-seat high wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and outwardly resembles that design.

<span class="mw-page-title-main">Team Mini-Max Hi-MAX</span> American kit aircraft

The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.

<span class="mw-page-title-main">Preceptor N3 Pup</span> American kit aircraft

The Preceptor N3 Pup is a family of ultralight, tube-and-fabric, high-wing, homebuilt aircraft. Kits were produced and marketed by Preceptor Aircraft, of Rutherfordton, North Carolina. The company was operating on a limited basis, actively selling plans online, but seems to have gone out of business in 2016.

<span class="mw-page-title-main">Hipp's Superbirds J-3 Kitten</span> Type of aircraft

The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.

<span class="mw-page-title-main">Ultravia Pelican</span> Type of aircraft

The Ultravia Pelican is the name given to two series of high-wing, single-engine, tractor configuration ultralight aircraft that were designed by Jean Rene Lepage and produced in kit form for amateur construction by Ultravia Aero International of Mascouche, Quebec and later Gatineau, Quebec.

The Light Miniature Aircraft LM-1, LM-2 and LM-3 are a family of American high wing, conventional landing gear, strut-braced, single engine ultralight aircraft that are scale reproductions of famous general aviation aircraft. The designs were all available as plans from Light Miniature Aircraft of Okeechobee, Florida for amateur construction.

The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.

<span class="mw-page-title-main">Flying K Sky Raider</span> Family of ultralight aircraft

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Falconar Golden Hawk</span> Canadian homebuilt light aircraft

The Falconar Golden Hawk is a Canadian tandem seat, pusher configuration, tricycle gear, canard-equipped ultralight aircraft that is offered in kit form by Falconar Avia of Edmonton, Alberta.

<span class="mw-page-title-main">Buzzman L'il Buzzard</span> Type of aircraft

The Buzzman L'il Buzzard is a Canadian, two seat side-by-side configuration, high wing, strut-braced, conventional landing gear, tractor configuration, ultralight aircraft, originally manufactured by Buzzman ARVS and later by L'il Hustler Ultralight Aviation of Holland Landing, Ontario. The aircraft is sold mostly assembled, less only paint, engine and instruments.

The St Croix Excelsior is an American ultralight aircraft that was designed by Chad Wille and Charles Wille, produced by St Croix Aircraft of Corning, Iowa and first flown in 1980. The aircraft was supplied in the form of plans for amateur construction with some hard-to-make parts available as well as partial kits.

The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.

The LiteWing Aircraft LiteTrike, also called The Lite Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied fully assembled.

The Lookout Mountain SkyCycle, also marketed as The Freedom Machine, is an American ultralight trike that was designed by Matt Taber, produced by Lookout Mountain Flight Park of Rising Fawn, Georgia and introduced in 1997. The aircraft was supplied as a kit for amateur construction and also as plans.

<span class="mw-page-title-main">Belite Ultra Cub</span> American ultralight aircfraft

The Belite Ultra Cub is an ultralight aircraft built by Belite Aircraft and intended as a tribute to the Piper Cub on the occasion of its 75th anniversary. The UltraCub was introduced at AirVenture 2012.

<span class="mw-page-title-main">Norman Aviation J6 Karatoo</span> Canadian ultraight aircraft

The Norman Aviation J6 Karatoo is a Canadian advanced ultralight aircraft, that was designed by Jesse Anglin, and produced by Norman Aviation of Saint-Anselme, Quebec. The aircraft was supplied as a kit for amateur construction, or as a complete ready-to-fly-aircraft.

The Anglin J6 Karatoo is an Australian ultralight and light-sport aircraft that was designed by Jesse Anglin and introduced in 1982. Over the years the J6 Karatoo has been produced by several different manufacturers, including Amax Engineering of Donvale, Victoria, Skyway Aircraft and is currently built by Serenity Aviation of Australia. The aircraft is supplied as plans or as a kit for amateur construction.

References

  1. 1 2 Wood, Stephen: At Last - Sky Pup (Original Color Brochure), page 1. Sport Flight Engineering, Inc., 1983.
  2. 1 2 3 4 5 6 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-54. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  3. 1 2 3 4 5 Build Your Own Ultralight (n.d.). "The Sky Pup". Archived from the original on 5 September 2013. Retrieved 13 January 2011.{{cite web}}: CS1 maint: year (link)
  4. 1 2 skypup.wikispaces (January 2009). "Sky Pup". Archived from the original on 9 January 2011. Retrieved 13 January 2011.
  5. 1 2 3 Downey, Julia: 2001 Plans Aircraft Directory, Kitplanes, Volume 18, Number 1, January 2001, page 31. Kitplanes Acquisition Company. ISSN   0891-1851
  6. 1 2 3 Downey, Julia: 2002 Plans Aircraft Directory, Kitplanes, Volume 19, Number 1, January 2002, page 31. Kitplanes Acquisition Company. ISSN   0891-1851
  7. 1 2 3 Downey, Julia: 2003 Plans Aircraft Directory, Kitplanes, Volume 20, Number 1, January 2003, page 30. Primedia Publications. ISSN   0891-1851
  8. skypup.wikispaces (July 2008). "Sky Pup Specifications". Archived from the original on 11 January 2011. Retrieved 13 January 2011.