Pelican | |
---|---|
Ultravia Pelican Club | |
Role | Ultralight aircraft |
National origin | Canada |
Manufacturer | Ultravia New Kolb Aircraft Aerodesign Flyer Indústria Aeronáutica Ballard Sport Aircraft |
Designer | Jean Rene Lepage |
Status | In production as the Ballard Pelican (2012) |
Produced | Le Pelican 1983-85 Pelican and subsequent two seat models 1985-2006 Aerodesign Pegasus 1997-2004 Pelican 500BR circa2001-2009 Flyer Kolb SS circa2008-2016 Flyer F600NG 2016-present Pelican PL and Sport 600 2009-present |
The Ultravia Pelican is the name given to two series of high-wing, single-engine, tractor configuration ultralight aircraft that were designed by Jean Rene Lepage and produced in kit form for amateur construction by Ultravia Aero International of Mascouche, Quebec and later Gatineau, Quebec. [1] [2] [3] [4]
The first Le Pelican was designed as a single-seat aircraft powered by a two-cylinder 18 hp (13 kW) Briggs & Stratton four-stroke lawnmower engine. It was designed in the early 1980s and greatly resembles the Aeronca C-2 of 1929. [1]
The original Le Pelican airframe is constructed from aluminum tubing, using gussets and pop rivets. The wing consists of a "D" cell with foam and aluminum ribs. All flying surfaces are covered in doped aircraft fabric. The very first Pelicans had wire-bracing for the wing and spoilers for roll control. These were replaced with strut-bracing and one-third span ailerons. The enclosed cabin, designed for Quebec winters included Lexan doors. The Pelican's conventional landing gear consists of a fibreglass rod for the main gear, with a tailskid, replaced on later models by a steerable tailwheel. [1]
The original Le Pelican was replaced in production by the single-seat Super Pelican which has taller landing gear and a Half VW engine of 35 hp (26 kW). [1]
The single-seat Le Pelican production ran from 1983 to 1985, with about 100 kits delivered. Due to demand for two-seaters Lepage designed a new "clean-sheet" aircraft in 1984, which retained the same name as the earlier single-seater. The two-seat Pelican Club and its derivatives were built in large numbers, with more than 700 flying by 2003. The original Pelican Club has a fibreglass fuselage and aluminum frame wings with aircraft fabric covering. The wings were later made all-metal and this model became the Pelican PL. The PL was available from the factory equipped with a 100 hp (75 kW) Rotax 912ULS or a 115 hp (86 kW) Rotax 914 turbocharged engine. Options included tricycle or conventional landing gear. [2] [3] [5]
The Pelican was initially produced in kit form by Ultravia of Mascouche, Quebec. The company later relocated to Gatineau, Quebec. The single-seat Le Pelican series was produced from 1983–85 and the two-seat Pelican series was built from 1985 until Ultravia went out of business in 2006. [1] [2] [3] [4]
In 1994, the Brazilian company Aerodesign certified and produced a new version of the Pelican PL and the Pelican Club, designated the Aerodesign AD2000 Pegasus under the National Civil Aviation Agency of Brazil H.03 program, although the approval is currently listed as "cancelled". [6] [7] In 1997 the company marketed this model as the Aerodesign Pegasus. [8] In 1999 this model was listed as eligible to be sold as a kit in Australia by the Australian Ultralight Federation. [9]
Since 2001 the Brazilian company Flyer Indústria Aeronáutica has assembled and produced several other aircraft designs based on the Pelican, as the Pelican 500BR, Kolb SS and the F600NG. [10] [11] [12]
Ultravia signed The New Kolb Aircraft Company as US distributor for the Pelican Sport 600 model in 2003. Kolb displayed the aircraft at Sun 'n Fun and AirVenture between 2003 and 2005. Ultravia pursued certification of the Pelican Tutor model under CAR 523 VLA, with the National Research Council conducting the test flying under contract, but Ultravia went out of business before completing certification. In 2006 Kolb purchased the assets of the bankrupt Ultravia and developed the aircraft, in partnership with Flyer Indústria Aeronáutica of Brazil into the Kolb Flyer Super Sport, based on pilot feedback gathered. The two-seat Kolb Flyer SS design was put into production in 2008. [3] [4] [13]
The Flyer SS's fuselage is built from carbon fibre and weighs 77 lb (35 kg), while the wing is made from 6061-T6 and 2024-T3 aluminum. Power is provided by a 100 hp (75 kW) Rotax 912ULS aircraft engine, giving a cruise speed of 117 kn (217 km/h). [3]
In about 2007 Kolb sold the rights to produce the Pelican line to Ballard Sport Aircraft of Sherbrooke, Quebec, who presently manufacturer kits and ready-to-fly advanced ultralight aircraft. [14] [15]
Data from Cliche [1]
General characteristics
Performance
Avionics
Aircraft of comparable role, configuration, and era
The Aero Adventure Aventura is a family of ultralight amphibians marketed as a kit aircraft by Aero Adventure of DeLand, Florida. The aircraft was designed by Bob Bailey in 1995.
Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.
The Freebird I is an American single-seat, high wing, tricycle gear, single engined pusher configuration ultralight kit aircraft designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina and later also produced by Pro Sport Aviation of Wingate, North Carolina.
The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.
The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.
The Kolb Mark III is a family of American side-by-side two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky, and intended for amateur construction.
The Kolb Slingshot is an American tandem two seat, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft, that was produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.
The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Buzzman L'il Buzzard is a Canadian, two seat side-by-side configuration, high wing, strut-braced, conventional landing gear, tractor configuration, ultralight aircraft, originally manufactured by Buzzman ARVS and later by L'il Hustler Ultralight Aviation of Holland Landing, Ontario. The aircraft is sold mostly assembled, less only paint, engine and instruments.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Antares MA-32 is the first model in a large family of Ukrainian ultralight trikes that is designed and produced by Antares Aircraft and at one time marketed by Leading Edge Air Foils as the LEAF Antares. The aircraft are supplied as kits for amateur construction.
The Apex Eco 6 is the first of a family of Czech single and two seat flying wing ultralight trikes that were designed and produced by To-Mi Aviation and later by Apex Aviation. The aircraft were supplied as kits for amateur construction.
The Harmening High Flyer is an American powered parachute that was designed and produced by Harmening's High Flyers of Genoa, Illinois.