Bushcaddy R-80

Last updated

R-80
CLASS R-80 Bush Caddy C-IGSU 32.JPG
CLASS R-80 BushCaddy
Role Ultralight aircraft and Light-sport aircraft
National origin Canada
Manufacturer Club Aeronautique Delisle Incorporated (1994-98)
Canadian Light Aircraft Sales and Service (1998-2011)
Bushcaddy (2011-present)
DesignerJean Eudes Potvin
Introduction1994
StatusIn production
Produced1994-present
Number built80 (December 2011)

The Bushcaddy R-80 is a Canadian ultralight and light-sport aircraft that was designed by Jean Eudes Potvin of Lac Saint-Jean, Quebec in 1994 and produced by his company Club Aeronautique Delisle Incorporated (CADI). It was later built by Canadian Light Aircraft Sales and Service (CLASS) of St. Lazare, Quebec and later Les Cedres, Quebec and now Bushcaddy of Lachute, Quebec. [1] [2] [3] [4] [5]

Contents

The R-80 designation indicates that the aircraft was originally designed for a Rotax engine of 80 hp (60 kW). [4]

The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft. [1] [2] [3] [4]

Design and development

A CLASS R-80 Bush Caddy under construction at the CLASS factory in Les Cedres, Quebec, Canada. CLASS R-80 Bush Caddy under construction 01.JPG
A CLASS R-80 Bush Caddy under construction at the CLASS factory in Les Cedres, Quebec, Canada.

The aircraft was designed to comply with the Canadian advanced ultralight rules and is also an approved US light-sport aircraft. It features a strut-braced high-wing, a two-seats-in-side-by-side configuration enclosed cockpit, fixed tricycle landing gear or conventional landing gear and a single engine in tractor configuration. [1] [3] [6]

The aircraft is made from 6061-T6 aluminum sheet over a cage of welded aluminum square 6061-T6 aluminum tube. The tail boom is conventional semi-monocoque construction. The non-tapered planform wings have 6061-T6 ribs and spars and employ a NACA 4413 (mod) airfoil. The airfoil modification removes the undercamber on the bottom of the wing, which makes construction easier, without giving up low speed performance. The aircraft's structure uses 2024-T3 aluminium for critical parts where extra strength is required, such as the spar, float and strut attachments as well as other critical components like the rudder horns. The R-80's structure is covered with 6061-T6 sheet of varying thicknesses; wing bottom skins are 0.016 in (0.41 mm) inches thick while the top is 0.020 in (0.51 mm) inches. The wings are supported by conventional "V" struts. 6061-T6 is predominantly used for its lower cost and also its better corrosion resistance, since many R-80s are flown on floats. Its 32 ft (9.8 m) span wing has an area of 168 sq ft (15.6 m2) and does not fit flaps. [1] [2] [3] [4]

Standard engines used on the R-80 include the 80 hp (60 kW) Rotax 912UL and the 100 hp (75 kW) Rotax 912ULS four-stroke powerplants. The 115 hp (86 kW) turbocharged Rotax 914 has also been fitted. The aircraft can also be mounted on floats and skis. Controls include a central "Y" control stick. [1] [2] [3] [4]

Construction time for the R-80 from the factory kit is 1,200 hours. [4]

Variants

CLASS R-80 BushCaddy on floats CLASS R-80 Bush Caddy C-IGSU 03.JPG
CLASS R-80 BushCaddy on floats
CLASS R-80 BushCaddy on wheels CLASS Bush Caddy R80 C-IFGM 01.JPG
CLASS R-80 BushCaddy on wheels
CADI R-80
Original production version built by CADI, about 60 produced. [4]
CLASS R-80 BushCaddy
Version produced by CLASS of Saint-Lazare, Quebec, after buying the rights from Potvin in 1998. Production was later moved to Les Cedres, Quebec. To acknowledge the CADI name the aircraft was named the Bushcaddy as it is capable of carrying "a load of people and freight into the Canadian bush". [4]
Bushcaddy R-80
Current production version produced by Bushcaddy of Lachute, Quebec and later of Cornwall Regional Airport in Summerstown, Ontario, after buying the rights from CLASS in 2011. [3] [7]

Specifications (R-80)

CLASS R-80 BushCaddy instrument panel CLASS R-80 Bush Caddy C-IGSU 16.JPG
CLASS R-80 BushCaddy instrument panel

Data from Bayerl and Bushcaddy [1] [7]

General characteristics

Performance

Related Research Articles

Aeroprakt A-24 Viking

The Aeroprakt A-24 Viking is a Ukrainian three-seat light-sport amphibian designed for home building and marketed in kit form by Aeroprakt.

Aeropilot Legend 540

The Aeropilot Legend 540 is a Czech ultralight aircraft, designed and produced by Aeropilot, introduced at the Aero show held in Friedrichshafen in 2011. The aircraft is supplied complete and ready-to-fly-aircraft.

The Airo 1 is a United Arab Emirates ultralight and light-sport aircraft produced by Airo Aviation of the Ras Al Khaimah Free Trade Zone. The aircraft is supplied as a complete ready-to-fly-aircraft.

Apollo Fox

The Apollo Fox is a Hungarian ultralight and light-sport aircraft produced by Apollo Ultralight Aircraft, of Eger. The aircraft is supplied complete ready-to-fly.

The Australian Lightwing SP-2000 Speed is an Australian light-sport aircraft, designed and produced by Australian Lightwing of Ballina, New South Wales. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The Avama Stylus is a Slovak light-sport aircraft, designed and produced by Avama of Poprad and introduced at AERO Friedrichshafen in 2010. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

BRM Land Africa Portuguese ultralight aircraft

The BRM Land Africa is a Portuguese ultralight aircraft, designed and produced by BRM Costruções Aeronáuticas. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

Bushcaddy R-120 Canadian homebuilt light aircraft

The Bushcaddy R-120 is a Canadian kit aircraft produced by Canadian Light Aircraft Sales and Service (CLASS) of St. Lazare, Quebec and later Les Cedres, Quebec and now Bushcaddy of Lachute, Quebec and more recently Cornwall Regional Airport in Summerstown, Ontario.

Bushcaddy L-160 Canadian homebuilt light aircraft

The Bushcaddy L-160 is a Canadian kit aircraft that was designed by Jean Eudes Potvin and produced by Club Aeronautique Delisle Incorporated, Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

The Bushcaddy L-164 is a Canadian kit aircraft that was designed by Sean Gilmore and produced by Canadian Light Aircraft Sales and Service and most recently by Bushcaddy. The aircraft is supplied as a kit for amateur construction.

Bushcaddy Canadian homebuilt light aircraft manufacturer

Bushcaddy Aircraft Canada, usually just called Bushcaddy or BushCaddy, was a Canadian aircraft manufacturer based at the Cornwall Regional Airport in Summerstown, Ontario. The company specialized in the design and manufacture of kit aircraft.

Ibis GS-700 Magic

The Ibis GS-700 Magic is a Colombian ultralight and light-sport aircraft, designed and produced by Ibis Aircraft of Cali, introduced in 2003. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

The MSL Aero H80 is a French ultralight aircraft that was designed by Massimo Tedesco and Sebastian Lefebre and produced by MSL Aero of Limoges-Fourches.

The Norman Aviation Nordic 8 Mini Explorer is a Canadian ultralight aircraft, designed and produced by Norman Aviation of Saint-Anselme, Quebec. The aircraft is supplied as a kit for amateur construction.

Tapanee Pegazair-100

The Pegazair-100 STOL is a two-seat STOL homebuilt aircraft developed in Canada by Tapanee Aviation, Inc. of Mont-Saint-Michel, Quebec.

Zlin Savage

The Zlin Savage is a series of light sport aircraft similar in construction to the Piper Cub.

The APEV Scoutchel is a French amateur-built aircraft, designed by Daniel Dalby and produced by APEV of Peynier. The aircraft is supplied as plans or as a kit for amateur construction.

The Taiwan Dancer TD-3 is a Taiwanese amateur-built aircraft produced by Taiwan Dancer Technology Co. of Nangang Village, Dayuan District, Taoyuan City. Designed by Chin Lien Wei, the aircraft is supplied as a kit for amateur construction.

BDC Aero Puma Canadian homebuilt light aircraft

The BDC Aero Puma is a Canadian ultralight and light-sport aircraft, originally designed by the Italian aircraft designer Antonio Bortolanza and built by Aeroplast of Sale, Piedmont, Italy. It is currently produced by BDC Aero Industrie of Lachute, Quebec. At one time available as a kit for amateur construction, now the aircraft is supplied only as a complete ready-to-fly-aircraft.

Aero East Europe Sila Family of Serbian light aircraft

The Aero East Europe Sila is a family of Serbian ultralight and light aircraft, designed and produced by Aero East Europe of Kraljevo and later of Jagodina, introduced at the AERO Friedrichshafen show in 2013. The design is supplied complete and ready-to-fly.

References

  1. 1 2 3 4 5 6 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011-12, page 35. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  2. 1 2 3 4 Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003-04, page 132. Pagefast Ltd, Lancaster UK, 2003. ISSN 1368-485X
  3. 1 2 3 4 5 6 Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, page 36. Flying Pages Europe SARL, 2015. ISSN   1368-485X
  4. 1 2 3 4 5 6 7 8 Hunt, Adam: Elegant Utility - Flying the CLASS R-80 BushCaddy, Canadian Flight July 2005, page B-1. Canadian Owners and Pilots Association.
  5. Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 47. Belvoir Publications. ISSN 0891-1851
  6. Experimental Aircraft Association (2012). "EAA's Listing of Special Light-Sport Aircraft". Archived from the original on 28 February 2014. Retrieved 19 May 2012.
  7. 1 2 Bushcaddy (2012). "R-80 Two place". Archived from the original on 8 February 2012. Retrieved 19 May 2012.