Nordic 8 Mini Explorer | |
---|---|
Role | Ultralight aircraft |
National origin | Canada |
Manufacturer | Norman Aviation |
Status | In production (2012) |
Number built | 4 (2011) |
The Norman Aviation Nordic 8 Mini Explorer is a Canadian ultralight aircraft, designed and produced by Norman Aviation of Saint-Anselme, Quebec. The aircraft is supplied as a kit for amateur construction. [1] [2] [3] [4]
The Mini Explorer was derived from the larger Hubert de Chevigny designed Personal Explorer, adapted to Canadian Advanced Ultralight rules. It features a strut-braced high-wing, a two-seats-in-side-by-side configuration enclosed cockpit, fixed tricycle landing gear and a single engine in tractor configuration. The Mini Explorer is intended as a flying camper and so includes sufficient cabin space with couches for two adults to sleep and a kitchen. Due to the emphasis on fuselage volume the Mini Explorer is not a fast aircraft for its fitted power, with a cruise speed of about 85 mph (137 km/h). [1] [2] [5]
The aircraft fuselage is made from welded steel tubing, with wooden structure wings and all surfaces covered in doped aircraft fabric. Its 36.1 ft (11.0 m) span wing has an area of 180.3 sq ft (16.75 m2) and no flaps. The cabin width is 48 in (122 cm). Standard engines fitted are the 80 hp (60 kW) Rotax 912UL, the 100 hp (75 kW) Rotax 912ULS and the 115 hp (86 kW) Rotax 914 four-stroke turbocharged powerplant. Construction time from the supplied kit is estimated as 500 hours. [1] [2] [3] [4]
In December 2011 the company reported four examples had been completed. In February 2018 there were three Mini-Explorers on the Transport Canada Canadian Civil Aircraft Register, including the prototype. [6]
Data from Bayerl, Pilot Mix and Kitplanes [1] [3] [4]
General characteristics
Performance
The Aero Adventure Aventura is a family of ultralight amphibians marketed as a kit aircraft by Aero Adventure of DeLand, Florida. The aircraft was designed by Bob Bailey in 1995.
The Fisher Dakota Hawk is a Canadian side-by-side two-seat, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders.
The Normand Dube Aerocruiser is a Canadian single-engined, two-seat bushplane designed by Normand Dube and supplied as a kit for homebuilding by Aviation Normand Dube of Sainte-Anne-des-Plaines, Quebec.
The Kolb Mark III is a family of American side-by-side two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky, and intended for amateur construction.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The Aero Synergie Jodel D20 is a French ultralight aircraft that was designed by Jean Délémontez and produced by Aero Synergie of Villefranche-de-Rouergue. The aircraft was supplied as a kit for amateur construction or as a completed aircraft.
The Alisport Yuma is an Italian ultralight aircraft, produced by Alisport of Cremella. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Alpi Pioneer 200 is an Italian ultralight and light-sport aircraft, designed and produced by Alpi Aviation, of Pordenone. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Alpi Pioneer 300 is an Italian ultralight and light-sport aircraft, designed produced by Alpi Aviation, of Pordenone. The aircraft is supplied as a kit for amateur construction.
The Australian Aircraft Kits Hornet STOL is an Australian ultralight aircraft, designed and produced by Australian Aircraft Kits and introduced in 2004. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Australian Aircraft Kits Wasp is an Australian ultralight aircraft, designed and produced by Australian Aircraft Kits. The aircraft is supplied as a kit for amateur construction.
The BRM Land Africa is a Portuguese ultralight aircraft, designed and produced by BRM Costruções Aeronáuticas. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Bushcaddy R-80 is a Canadian ultralight and light-sport aircraft that was designed by Jean Eudes Potvin of Lac Saint-Jean, Quebec in 1994 and produced by his company Club Aeronautique Delisle Incorporated (CADI). It was later built by Canadian Light Aircraft Sales and Service (CLASS) of St. Lazare, Quebec and later Les Cedres, Quebec and now Bushcaddy of Lachute, Quebec.
The HB-Flugtechnik HB-208 Amigo is an Austrian ultralight aircraft that was designed by Heino Brditschka and produced by HB-Flugtechnik of Ansfelden. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Humbert La Moto Du Ciel is a French ultralight aircraft, designed and produced by Humbert Aviation of Ramonchamp, introduced in the mid-1980s. The aircraft is supplied as a complete ready-to-fly-aircraft.
The Icarus F99 Rambo is a Romanian ultralight aircraft, designed by Mr Fendrihan and produced by Romaero S.A of Bucharest under subcontract to the Icarus Foundation, also of Bucharest. The foundation is a sporting and cultural institution that promotes aviation in Romania. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Pro.Mecc Sparviero is an Italian ultralight aircraft, designed and produced by Pro.Mecc of Corigliano d'Otranto. The Sparviero is supplied as a kit for amateur construction or a complete ready-to-fly-aircraft.
The Rainbow Cheetah a South African ultralight and light-sport aircraft, designed by Vladimir Chechin and produced by Rainbow Aircraft. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Slepcev Storch is a Serbian type-certified, kit and ultralight STOL aircraft, designed by Yugoslavian-Australian Nestor Slepcev and currently produced by Storch Aircraft Serbia in several different versions. The ultralight version is a 3/4 scale replica of the Fieseler Fi 156 Storch of the Second World War and is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Falconar AMF-14H Maranda is a Canadian amateur-built aircraft, designed and originally produced by Falconar Avia for the Canadian basic ultralight class and US light-sport aircraft category. The aircraft is supplied as a kit or as plans for amateur construction.