Yukon | |
---|---|
Murphy Yukon with amphibious floats. | |
Role | Amateur-built aircraft |
National origin | Canada |
Manufacturer | Murphy Aircraft |
First flight | 2007 |
Introduction | 2007 |
Status | In production (2019) |
Produced | 2007-present |
Number built | at least three |
Developed from | Murphy SR2500 Super Rebel and Murphy Moose |
The Murphy Yukon is a Canadian amateur-built aircraft, produced by Murphy Aircraft of Chilliwack, British Columbia, introduced at the AirVenture show in 2007. The aircraft is supplied as a kit for amateur construction. [1] [2] [3]
The design is derived from the Murphy SR2500 Super Rebel and Murphy Moose. [1] [2] [3]
The Yukon was designed as a bush aircraft for fishing and camping flights, but with lower power and thus lower fuel consumption over the radial engine-powered Murphy Moose, making it more economical to operate. Design goals included simple jig-less construction, good cruise speed and docile low speed handling characteristics. [1] [2] [3]
The aircraft features a strut-braced high-wing, a four-seats-in-side-by-side configuration enclosed cabin accessed by doors, fixed tricycle landing gear or conventional landing gear and a single engine in tractor configuration. The design features a large cargo compartment with a separate door for access. [1] [2] [3]
The aircraft is made from semi-monocoque 6061-T6 aluminum sheet construction, with pre-punched holes from a numerical control design. The Yukon's wing employs a modified NACA 4415 airfoil, has an area of 190 sq ft (18 m2) and mounts flaps. The standard engines used are the 180 hp (134 kW) Lycoming O-360 and the 210 hp (157 kW) Lycoming IO-390 four-stroke powerplants. [1] [2] [3]
The aircraft is available as a complete kit, a fast build kit, or as three component sub-kits that can be purchased separately over time. These consist of a tail kit, wing kit and fuselage kit. [2] [3]
The kit is available in both nosewheel or taildragger configurations. The aircraft can also be mounted on straight or amphibious floats and skis. [1] [2] [3]
In a 2008 review, Aero-News Network stated, "It's an adaptable bird, none-the-less, due to a "larger than life" passenger cabin and flexible seating arrangements. With all four seats in place, there is still sufficient room for two tents, coolers, chairs and camping gear for four. Removing the rear seat opens a HUGE area within which you can load items from stretchers to bicycles, or even use as sleeping accommodations!" [2]
By January 2019, one example had been registered in the United States with the Federal Aviation Administration and two with Transport Canada. [4] [5]
Data from Manufacturer [3]
General characteristics
Performance
The Barrows Bearhawk, now also called the Barrows 4-Place Bearhawk, is an American amateur-built aircraft, designed by Bob Barrows and produced by R&B Aircraft of Fincastle, Virginia, AviPro Aircraft and now Bearhawk Aircraft of Austin, Texas. The aircraft is supplied as a kit or as plans for amateur construction.
The Murphy SR2500 Super Rebel is a Canadian four-seat monoplane designed by Murphy Aircraft of British Columbia. The type was sold as a kit for home construction, but production ended by 2008.
The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.
The Partenair Mystere is a Canadian two-seat, pusher configuration monoplane that was designed by Partenair Design of Saint-Jean-sur-Richelieu, Quebec and intended for amateur construction from kits.
The Stoddard-Hamilton Glasair II is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation as a kit for amateur construction. It was first flown in 1989, and remained in production in 2012.
The Peña Dahu, named for the legendary French mountain animal, is a French amateur-built aircraft that was designed by Louis Peña of Dax, Landes and made available in the form of plans for amateur construction.
The AeroCad AeroCanard is a family of American amateur-built aircraft, designed and produced by AeroCad of Florissant, Missouri. The aircraft is supplied as a kit for amateur construction.
The Custom Flight North Star is a Canadian amateur-built aircraft, designed by Morgan Williams and produced by Custom Flight of Tiny, Ontario. The aircraft is based on the Piper PA-18 Super Cub and is supplied as a kit for amateur construction.
The Falconar F12A Cruiser is a Canadian amateur-built aircraft, designed by Chris Falconar and originally produced as a kit by Falconar Avia. The aircraft is now supplied as plans for amateur construction by Manna Aviation.
national
The Aircraft Technologies Acro 1 is an American aerobatic homebuilt aircraft that was designed by Fred Meyer and produced by Aircraft Technologies of Lilburn, Georgia. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. Neither plans nor kits are available anymore and the aircraft is out of production.
The Express Series 90 is an American homebuilt aircraft that was designed and produced by the Express Aircraft Company of Olympia, Washington, introduced in the late 1980s. When it was available the aircraft was supplied as a kit for amateur construction.
The Lucas L-6B is a French homebuilt aircraft that was designed by Émile Lucas. When it was available the aircraft was supplied in the form of plans for amateur construction.
The Sea Storm is an Italian homebuilt amphibious flying boat that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.
The St Croix Sopwith Triplane is an American homebuilt aircraft that was designed and produced by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction. The aircraft is a full-size replica of the 1916 Sopwith Triplane fighter aircraft.
The SkyDancer SD-260 was an American aerobatic homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.
The Aero Designs Pulsar is an American two-seat, low wing, ultralight and homebuilt aircraft that was designed by Mark Brown and first produced by Aero Designs of San Antonio, Texas, introduced in 1985. When it was available the Pulsar was supplied as a ready-to-fly aircraft and as a kitplane for amateur construction.
The Ultimate 10-200 is a Canadian homebuilt aerobatic biplane that was designed produced by Streamline Welding of Hamilton, Ontario, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The Tech Aero TR 200 is a French homebuilt aerobatic aircraft that was designed and produced by Tech Aero of Glisolles, first flown in August 1988. When it was available the aircraft was supplied as a kit for amateur construction.
The Washington T-411 Wolverine is an American homebuilt aircraft that was produced by Washington Aeroprogress of Seattle, Washington, introduced in the 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.