FP-404 | |
---|---|
Role | Kit aircraft |
National origin | Canada |
Manufacturer | Fisher Flying Products |
First flight | 1984 |
Introduction | 1984 |
Number built | 355 (2011) [1] |
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada. [1] [2] [3] [4] [5] [6]
The FP-404 was designed by Fisher Aircraft in the United States in 1984 and was the company's first design that was too heavy for the US FAR 103 Ultralight Vehicles category, with the category's maximum 254 lb (115 kg) empty weight. The 404's standard empty weight is 275 lb (125 kg) when equipped with a two-stroke 50 hp (37 kW) Rotax 503 engine, putting it into the US experimental-amateur-built category, although it qualifies as an ultralight in other countries, such as Canada. The design goal was to provide a nostalgic aircraft reminiscent of the biplanes of the 1930s, as the company explains "The FP-404 represents a reborn era in airborne adventure. This bi-plane aircraft is a throw-back to seat-of-the-pants flying, complete with minimal instruments and bare-necessity controls." [3] [5] [6]
The construction of the FP-404 is similar to the Fisher FP-202 Koala. The aircraft's structure is entirely made from wood, with the wooden fuselage built from wood strips arranged in a geodesic form, resulting in a very strong and light aircraft with redundant load paths. Both the wings and fuselage are covered with doped aircraft fabric. The wings are strut-braced with both interplane struts and cabane struts. The aircraft has no flaps. The company claims it takes an amateur builder 500 hours to build the FP-404, "using normal household tools". [3] [5] [6]
Early versions of the FP-404 were equipped with the 28 hp (21 kW) Rotax 277 in an attempt to keep the aircraft under the US FAR 103 Ultralight Vehicles weight limit but the aircraft was found to be under-powered due to its short wing span and high-drag configuration. Heavier engines, like the 40 hp (30 kW) Rotax 447 and 50 hp (37 kW) Rotax 503 engines provided adequate power but put the 404 over the category weight limit. These models were designated as the Fisher 404 EXP to show that they would not qualify for the FAR 103 weight limit. [3] [5]
By late 2004 over 350 FP-404s were flying. [2]
Reviewer Andre Cliche said about the design:
The forward view from the cockpit is not the best as it is restricted by the wings and cabane struts. The wing span is very short at 18’. This translates into superb maneuverability and almost non—existent adverse yaw. On the other hand, the short span means that the FP-404 needs more power to sustain altitude and has a relatively high stall speed. [5]
Data from Company website, Kitplanes and Cliche [2] [3] [4] [5] [6]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.
The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.
The Fisher FP-202 Koala is a Canadian single-seat high wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and outwardly resembles that design.
The Fisher Super Koala is a two-seat, high wing, conventional landing gear, single-engined, light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.
The Fisher FP-303 is a Canadian single-seat, low wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States, but the company is now located in Woodbridge, Ontario, Canada.
The Fisher Celebrity is a Canadian two-seat, conventional landing gear, single engined, biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States but the company is now located in Dorchester, Ontario, Canada.
The Fisher Classic is a Canadian two-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft is a two-seat derivation of the Fisher FP-404. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.
The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.
The Team Mini-MAX is a large family of single-seat, mid-wing, strut-braced, single engine aircraft, available in kit form for amateur construction. The first Mini-MAX had its first flight in 1984. Its name indicates its original design goals: a minimum-cost aircraft that requires a minimum of building space, time and skill, but which provides a maximum of enjoyment and performance.
The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.
The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction.
The Pop's Props Cloudster is a single seat, open-cockpit, parasol wing, single-engine monoplane, that was first flown in 1995. The aircraft was produced by Pop's Props of Cooksville, Illinois and made available as plans or in kit form. The company is no longer in business and kit production has been transferred to Simplex Aeroplanes of Old Saybrook, Connecticut.
The Pop's Props Zing is a single seat, open-cockpit, parasol wing, single-engine monoplane, first flown in 1996. The aircraft was designed by Scott Land and produced by Pop's Props of Cooksville, Illinois in the form of plans and an aircraft kit. The company is no longer in business and the aircraft kit is now available from Simplex Aeroplanes of Old Saybrook, Connecticut.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Air Creation Racer is a French single-seat, weight-shift control ultralight trike that was built by Air Creation of Aubenas between 1986 and 2010. It was available in kit form for amateur construction or as a completed aircraft.
The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.
{{cite web}}
: CS1 maint: year (link)