Zenair CH 601 HDS ZodiacZenair CH 601XL with tailwheel undercarriage, Rotax 912ULS engine and three blade propellerZenair CH601XL
The Zodiac is a family of Canadian all-metal, two-seat, fixed landing gear airplanes that first flew in 1984. The aircraft have been produced as kits and completed aircraft by Zenair in Canada and Zenith Aircraft Company in the US.[1][2]
The Zodiac was developed by Avions Pierre Robin engineer Chris Heintz in the early 1970s. The Zenair CH 200 kit plane was developed as a Homebuilt aircraft, meaning that consumers can purchase the plane as components to assemble it themselves.[3][4] Variants of the Zodiac have since been manufactured in Canada, Europe, the United States and South America as a factory-assembled, ready-to-fly aircraft.[3]
The original Zodiac model was designed for a load factor of +/-6g at the maximum gross weight of 1200 pounds; +/- 6.9g at 1050 pounds and 8.3g at 875 pounds. The empty weight of the prototype was 590 pounds.[5]
Heintz drafted the regulations for light-sport aircraft in Canada around the time he designed the Zodiac. He also played an important role in drafting the current light-sport aircraft (LSA) rules for the United States.
Zenith Aircraft Company still produces kits and quick-build kits for the Zodiac kit for the homebuilt-market.[6] The company also provides engine mounts and instructions for mounting the Stratus EA 81 engine in the CH 601 series.[7]Chevrolet Corvair engines have also been employed.[8]
There are over 1000 Zodiac aircraft flying worldwide.[3]
Operational history
Safety incidents and grounding
Wing-related incidents
In the Netherlands, the Dutch government grounded the 12 Dutch-registered CH 601 XLs on 24 October 2008. The planes were banned from flying pending an investigation into their structural strength, following the crash of a European variant of the design (Rotax powered and 450kg (992lb) maximum take-off weight) that killed two people. According to the Dutch government, since 2005 "at least seven accidents with Zenith CH601 XLs have happened in which one or both wings have failed".[9] Zenair Europe investigated these accidents,[10] concluded that none are due to a design defect and, after a first-hand review of the wreckage, also rejected suggestions that the aircraft in the Dutch accident experienced a structural failure.[11]
On 14 April 2009, the NTSB wrote an urgent letter to the FAA recommending that they ground all Zodiac CH 601 XLs, saying, "It appears that aerodynamic flutter is the likely source of four of the U.S. accidents and of at least two foreign accidents".[12] The NTSB also wrote to ASTM International, the body responsible for developing standards for light sport aircraft, recommending that those standards be changed in light of the investigation. The NTSB said that the type had been involved "in six in-flight structural breakups since 2006".[12][13][14][15][16]
Zenith Aircraft disputed the NTSB's conclusions and stated in a response on their website that "[w]e continue to believe wing flutter will not occur if the control cables are adjusted properly."[17] They also cited Zenair Europe's disagreement with the Dutch government's conclusion that that accident was caused by flutter. AMD issued a safety alert in October 2008 mandating inspections of aileron control cable tensions.[18] The company hired an independent consultant, Dr. Uwe Weltin, an internationally recognized flutter and vibrations specialist and head of the Institut für Zuverlaessigkeitstechnik at the Technical University of Hamburg-Harburg who concluded that when the CH 601 XL is built and maintained to Zenair specifications, there is "no tendency to flutter or divergence found within the flight envelope of the CH 601 XL". The company claimed that the report clears the Zodiac design of flutter-related concerns as long as CH 601 XL is built and maintained to Zenair specifications.[19]
In reacting to the NTSB recommendations the FAA Administrator Randy Babbit declined to ground the aircraft, and in a 13 July 2009 letter, stated, "Data indicates the CH-601XL has a safety record similar to other S-LSA and appears capable of safe flight and operations if maintained according to the manufacturer's recommendations."[20]
On 6 November 2009 an amateur-built CH-601XL broke up in flight over Arkansas, resulting in the death of the pilot. Preliminary investigation of the accident revealed a failure mode similar to that seen in the earlier crashes, as both wings separated in flight. This brought the number of crashes to seven and deaths to 11.[21][22]
The FAA issued a Special Airworthiness Information Bulletin on 7 November 2009 and strongly recommended that the aircraft not be flown until modifications detailed in an AMD Safety Alert are carried out. AMD and Zenith Aircraft issued documents the same day, mandating that the S-LSA version not be flown until the modifications were completed and recommended all aircraft be modified. The modifications included strengthening of the main and rear wing spar carrythroughs and the addition of aileron balance weights. The Experimental Aircraft Association also recommended grounding all affected aircraft until modifications are complete.[23][24][25][26][27]
In a statement issued by Zenith Aircraft, the designer, Chris Heintz, in response to the question "Why are you recommending this Upgrade Package? What has prompted this "180-degree" shift, from insisting that the CH 601 XL design was fine "as is", to now mandating a list of upgrades requiring more than a dozen modifications?" stated:
The past two years have been challenging for the CH 601 XL community around the world. As we all know, a number of accidents have occurred over the span of a few years for which no common cause has been determined. This lack of a "smoking gun" has caused all kinds of conjectures and wild guesses as to probable cause, and each time a new "theory" or "solution" is proposed, I and numerous engineers spend long hours trying to validate or rebuke the latest round of speculation. To this date, after thousands of man-hours of investigations, multiple design reviews and an unheard-of amount of testing, the accidents in question still do not share a common cause. In offering this "Upgrade Package" I have had to set aside my own professional opinion (that the design is sound) as well as legal counsel's advice in order to provide builders, owners and pilots the "fix" that they have been asking me for. With these upgrades (my "180° shift"), the safety margins of key airframe components have been dramatically increased...[28]
On 12 November 2009 the FAA ceased issuing new Certificates of Airworthiness, requiring new registrants to prove that they have complied with the modifications before being permitted to fly the aircraft.[22]
In addressing the 6 November 2009 accident NTSB Chairman Deborah A.P. Hersman said on 13 November 2009:
We are pleased that the FAA and the manufacturer have acted on the safety-of-flight issues that we identified with the Zodiac special light sport airplane. We are troubled, however, that no modifications are required on the amateur-built planes. We are very concerned that a lack of required compliance may lead to more accidents like the one in Arkansas, and others we've already seen.[21]
The FAA completed an in-depth review of the CH601 XL and 650 and issued a report entitled Zodiac CH601 XL Airplane Special Review Team Report January 2010. The FAA concluded:[29][30]
FAA review of the in-flight failures did not indicate a single root cause, but instead implicated the potential combination of several design and operation aspects. Our preliminary assessments focused on the strength and stability of the wing structure. Further analysis during the special review found the loads the manufacturer used to design the structure do not meet the design standards for a 1,320 lb (600kg) airplane. Static load test data verifies our conclusion. The special review also identified issues with the airplane's flutter characteristics, stick force gradients, airspeed calibration, and operating limitations.[29]
In reacting to the FAA's report the Experimental Aircraft Association's Vice President of Industry and Regulatory Affairs, Earl Lawrence, said, "The FAA did an excellent job with this investigation and deserves credit for thoroughly exploring all possibilities. EAA had vigorously pushed for comprehensive data on these accidents. We wanted to see the data, so aircraft owners knew exactly what modifications were needed and why they were needed immediately."[31]
On 20 April 2019 another wing failure accident in Bulgaria killed the pilot and passenger.[32]
Variants
Zenair CH 600
The original version of the Zodiac, the CH 600, was designed by Chris Heintz and first flown in 1984. The aircraft was intended as a primary trainer.[2] The original prototype was powered by a Volkswagen 1875cc engine converted for aircraft use that produced 65 hp at 3400 rpm.[5]
Zenair CH 601 HD
The CH 601 HD (for heavy duty) was the follow-on to the original CH 600 and incorporated many improvements to the design. The HD version had a gross weight of 1200 lbs and a standard empty weight of 530 lbs. Aircraft kits were marketed by Zenair of Midland, Ontario in Canada and by Zenith Aircraft of Mexico, Missouri.[33]
Zenair CH 601 HDS
The CH 601 HDS (for heavy duty speedwing) was a version of the HD with the wing span reduced to 23 feet (7.0m) and a wing area of just 98 square feet (9.1m2). The wing also featured a tapered design with a 34 inch chord at the wing tip.[34]
Zenair CH 601 UL
The UL version of the CH 601 was specially designed for the CanadianAdvanced Ultralight Aeroplane category that was introduced in 1991. Heintz was instrumental in the creation of the category as the author of the standards and used the CH 601 as a model for the category. The UL version had a reduced gross weight of 1058 lbs, the maximum allowed in the category. When the gross weight for the AULA category was increased to 1200 lbs in 2001 the CH 601 UL had its gross weight increased to the 1200 lb mark also. The UL version was supplied in 51% or 85% kit or completed form by Zenair in Canada and was designed for engines of 80–100 horsepower (60–75kW). The aircraft did not neatly fit any US categories and US buyers were advised to consider the HD instead.[33][35][36]
Zenith CH 601 XL
The CH 601 XL was first flown in 1991 as an improved version of the HD developed for the amateur-built market and also for the American Light Sport Aircraft category. The XL features many incremental improvements over the HD, including a new wing design, wing fuel tanks to replace the fuselage tanks of the HD, new landing gear design and a new canopy.[6][33]
Modernized version of the 601, with a larger cockpit, a larger canopy with more headroom, swept-back fin and rudder and engine options that include the 120hp (89kW)Jabiru 3300, 100hp (75kW)Continental O-200 and 100hp (75kW)Rotax 912ULS. One hundred had been completed and flown by December 2011.[1][37][38]
Version for the European microlight category, with a gross weight of 472.5kg (1,042lb) and a Rotax 912ULS engine of 100hp (75kW). Manufactured as a ready-to-fly aircraft by ICP srl in Italy.[39]
AMD Zodiac XL & XLi
The completed US Light Sport Aircraft compliant version of the XL is the AMD Zodiac produced by Aircraft Manufacturing and Design of Eastman, Georgia, USA. The aircraft is available in two versions, the XL, and the XLi. The XLi is IFR equipped for night flying and instrument flight conditions, while the XL is only equipped for VFR day and night flying.[3]
AMD Zodiac LS and LSi
Zodiac CH 650 in VFR and IFR versions. Standard engine is the 100hp (75kW)Continental O-200[3]
Zenair Ltd is a Canadian kit aircraft producer founded by aeronautical engineer Chris Heintz and based in Midland, Ontario.
Zenith Aircraft Company is a designer, developer and manufacturer of kit aircraft.
The Berkut 360 is a tandem-seating, two-seat homebuilt canard aircraft with pusher configuration and retractable landing gear, built primarily of carbon fiber and fiberglass.
The Zenith STOL CH 701 and CH 750 are a family of light, two-place kit-built STOL aircraft designed by Canadian aeronautical engineer Chris Heintz through his Midland, Ontario, based company, Zenair. The CH 701 first flew in 1986 and the design is still in production. The CH 750 was first introduced in 2008. The CH 701 was later developed into the four-place Zenith STOL CH 801.
Aircraft Manufacturing and Design Co. (AMD) is a manufacturer of three aircraft- the Alarus CH2000, the Zodiac CH601, and the Patriot 150.
The AMD Alarus CH2000 is a two-seat, fixed tricycle gear general aviation airplane, used primarily for flight training, that was designed by Chris Heintz. It was manufactured by Aircraft Manufacturing and Design Co. in Eastman, Georgia. It is a low-wing aircraft, with one door located above each wing, respectively. It can be considered a competitor to similar aircraft used for flight training, such as the Diamond DA20.
The Bede BD-10 was Jim Bede's attempt to introduce the world's first kit-built jet-powered general aviation supersonic aircraft. After several years of testing and modifications, the project was taken over by investors in order to produce fully completed civilian and military training aircraft, but these projects were never realized. Five examples were built; three of these crashed, and the remaining two examples are unflyable.
The Zenith STOL CH 801 is a four-seat sport STOL aircraft developed by Chris Heintz and available in kit form from the Zenith Aircraft Company.
The Zenair Zipper is a Canadian ultralight high-wing, single seat aircraft that was designed by Chris Heintz and produced by Zenair.
The AMD Patriot is a light sport aircraft produced by Aircraft Manufacturing and Design Co. In 2007 AMD announced that they intended to produce a high-wing, all metal, tricycle gear aircraft with a Continental O-200 engine to compete with the Cessna Skycatcher.
The Zenair Zenith CH 200 and CH 250 are a family of Canadian single-engined homebuilt light aircraft. It is a low-winged single engine monoplane, that was first flown in France in 1970, with kits being made by the Canadian company Zenair from 1974, with hundreds built and flown.
The Zenair Tri-Z CH 300 is a three-seat Canadian homebuilt light aircraft. A single-engined low-winged monoplane, the CH 300 first flew in 1977, with several hundred kits sold.
The Zenair Mono-Z CH 100 is a single-seat, single-engined Canadian light aircraft of the 1970s, that was designed by Chris Heintz. It is a smaller version of the Zenair CH 200 with a less powerful engine, which was sold as a homebuilt aircraft by Zenair.
The Zenith CH 150 Acro Zenith is a Canadian single-engine, low wing, all-aluminum aircraft designed by Chris Heintz and produced by Zenair in kit form for amateur construction. The aircraft is intended for aerobatic use and was introduced at the Experimental Aircraft Association convention in 1980.
The ICP Savannah is a high-wing, single-engine, ultralight with side-by-side seating for two produced in Italy by ICP srl. It has sold in large numbers, particularly in Europe. The Savannah is in production, sold in both kit and ready-to-fly form.
The Zenair Zodiac CH 640 is a Canadian light aircraft that was designed by Chris Heintz and is produced by Zenair in the form of a kit for amateur construction.
On 7 July 2013, a single-engine de Havilland Canada DHC-3 Otter, operated by air charter company Rediske Air, crashed on take-off at Soldotna Airport, Alaska. The sole crewmember and all nine passengers on board were killed. The crash was attributed to improper loading.
The Zenair CH 180 Super Acro-Z is an aerobatic light aircraft, that was designed by Chris Heintz and built by Zenair in the 1980s.
Chris Heintz was a French and Canadian aeronautical engineer, known for his kit aircraft designs.
1 2 Zenith Aircraft Company (November 2006). "ZODIAC CH 601 HD". Archived from the original on 12 April 2008. Retrieved 1 March 2008.
1 2 3 4 5 6 7 Aircraft Manufacturing & Design (September 2008). "Zodiac 650". Archived from the original on 27 September 2010. Retrieved 7 October 2010.
↑ Howard Levy (Summer 1971). "Zenith French homebuilt with factory flavor". Air Trails.
1 2 Cox, Jack (May 1985). "One More Look at Oshkosh '84'". Sport Aviation. pp.45, 46.
1 2 Zenith Aircraft Company (February 2008). "ZODIAC XL". Archived from the original on 2 March 2008. Retrieved 1 March 2008.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
