Fisher FP-303

Last updated

FP-303
Role Kit aircraft
National origin Canada
Manufacturer Fisher Flying Products
First flight1982
Introduction1984
Number built205 (2011) [1]

The Fisher FP-303 is a Canadian single-seat, low wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada. [1] [2] [3] [4] [5] [6]

Contents

Development

The FP-303 was designed by Fisher Aircraft in the United States in 1982 and was intended to meet the requirements of the US FAR 103 Ultralight Vehicles category, including that category's maximum 254 lb (115 kg) empty weight. The design goal was to provide ultralight pilots with an aircraft that was as portable as possible. To this end the aircraft's wings fold along the fuselage to rest on the horizontal stabilizer allowing trailering or storage in a small hangar or with other aircraft. The aircraft can be field assembled from its travelling state in ten minutes. The FP-303 has a standard empty weight of 235 lb (107 kg) when equipped with a two-stroke 28 hp (21 kW) Rotax 277 engine. [3] [5] [6]

The construction of the FP-303 is similar to the Fisher FP-202 Koala. The aircraft's structure is entirely made from wood, with the wooden fuselage built from wood strips arranged in a geodesic form, resulting in a very strong and light aircraft with redundant load paths. Both the wings and fuselage are covered with doped aircraft fabric. The wings are strut-braced underneath to the landing gear and utilize bottom jury struts. The wing is positioned aft enough that the pilot has adequate downward visibility. Flaps and brakes are optional. The company claims it takes an amateur builder between 300–500 hours to build the FP-303. [3] [5] [6]

Specifications (FP-303)

Data from Company website, Kitplanes and Cliche [2] [3] [4] [5] [6]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Aero-Works Aerolite 103</span> American ultralight airplane

The Aero-Works Aerolite 103 is an American single seat, high-wing, pusher configuration ultralight aircraft, designed by Terry Raber and introduced by Aero-Works, Inc, of Millersburg, Ohio, in 1997. The aircraft's model number indicates that it was designed to comply with the Federal Aviation Administration FAR 103 ultralight rules.

<span class="mw-page-title-main">Fisher Avenger</span> Canadian ultralight aircraft

The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.

The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

The Wings of Freedom Flitplane is an American single-seat, high-wing, single-engine ultralight aircraft that is available as a kit aircraft or as plans for amateur construction from Wings of Freedom of Hubbard, Ohio.

<span class="mw-page-title-main">Fisher FP-202 Koala</span> Canadian ultralight aircraft

The Fisher FP-202 Koala is a Canadian single-seat high wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and outwardly resembles that design.

The Fisher Super Koala is a two-seat, high wing, conventional landing gear, single-engined, light kit aircraft designed for construction by amateur builders. The aircraft was inspired by the design of the Piper J-3 Cub and strongly resembles that design.

<span class="mw-page-title-main">Fisher FP-404</span> Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States, but the company is now located in Woodbridge, Ontario, Canada.

<span class="mw-page-title-main">Fisher Classic</span> Canadian homebuilt light aircraft

The Fisher Classic is a Canadian two-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft is a two-seat derivation of the Fisher FP-404. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.

The Freebird I is an American single-seat, high wing, tricycle gear, single engined pusher configuration ultralight kit aircraft designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina and later also produced by Pro Sport Aviation of Wingate, North Carolina.

<span class="mw-page-title-main">Team Mini-Max Hi-MAX</span> American kit aircraft

The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.

<span class="mw-page-title-main">Sorrell Hiperlight</span> American ultralight biplane

The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction.

<span class="mw-page-title-main">Hipp's Superbirds J-3 Kitten</span> Type of aircraft

The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.

The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.

<span class="mw-page-title-main">Flying K Sky Raider</span> Family of ultralight aircraft

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Titan Tornado</span> American kit aircraft

The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.

References

  1. 1 2 Vandermeullen, Richard: 2011 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 53. Belvoir Publications. ISSN 0891-1851
  2. 1 2 Downey, Julia: Kit Aircraft Directory 2005, Kitplanes, Volume 21, Number 12, December 2004, page 57. Belvoir Publications. ISSN 0891-1851
  3. 1 2 3 4 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 161. BAI Communications. ISBN   0-9636409-4-1
  4. 1 2 Kitplanes Staff: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 47. Primedia Publications. IPM 0462012
  5. 1 2 3 4 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-22 Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  6. 1 2 3 4 Fisher Flying Products (n.d.). "FP-303" . Retrieved 16 October 2009.{{cite web}}: CS1 maint: year (link)
  7. ↑ Flight 1984
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.