Ameri-Cana Eureka

Last updated

Ameri-Cana Eureka
Role Ultralight aircraft
National origin Canada
Manufacturer Ameri-Cana Ultralights
DesignerWilf Stark
First flightAugust 1997
Introduction1997
StatusProduction completed July 2003

The Ameri-Cana Eureka is a Canadian designed and built low-wing, single seat, conventional landing gear-equipped ultralight aircraft that was produced as a kit by Ameri-Cana Ultralights of Irricana, Alberta between 1997 and 2003. [1] [2] [3] [4]

Contents

Development

Designer Wilf Stark conceived the Eureka as a US FAR 103 Ultralight Vehicles compliant aircraft. Stark identified that the US market lacked "an affordable Ultralight that is also easy to build". [3]

Stark further noted: "Although there are ultralight kits available for about $4500-$6500 (prior to engine purchase), they often require building and fabrication times that can approach 600 to 1000 hours for first-time builders. This realistically translates into 2 or more years of building time that somehow has to be accommodated among other family obligations. It is a sad statistic that less than one-third of purchased airplane kits ever get completed by the original purchaser. They either quietly wither away in a corner, or they are sold at a fraction of their original price, to be completed by someone else." [3]

Another aim of the design was to keep the complete purchase cost under US$6000 as the designer felt that this was the maximum figure that most builders could justify without causing marital discord. [1] [5]

As a result, he designed the Eureka to be both inexpensive and quick to construct from an assembly kit. The kit included pre-built wings, tail and fuselage that could be bolted together in about 20 hours of labour for the airframe, giving a total assembly time of two weekends. [3] [5]

The aircraft is constructed predominantly from foam, aluminum and wood with no aircraft fabric used in finishing. Each 12 ft (3.7 m) wing uses a deep spar, foam ribs and is covered in a single pre-painted white aluminum panel. The controls are conventional three-axis, with full-span ailerons and an all-flying rudder. The wings are not folding, but can be removed in five minutes to allow trailering the aircraft. [1] [2] [3]

To keep costs and aircraft weight down, the recommended engines are the 25 hp (19 kW) Hirth F-33 engine and the Zenoah G-25 of 22 hp (16 kW). [3]

The prototype Eureka first flew in August 1997. [1]

In 1999, reviewer Andre Cliche said: "The kit sells for $6000, which is amazingly low when you consider that this number even includes the engine, propeller and basic instruments. I wonder if they will stay in business for long with such a low profit margin?" [1]

After introduction, the price was increased to US$5000 for the airframe alone, estimating that it could be completed for US$8000 total. The company ceased providing kits in July 2003 stating "The Eureka has been withdrawn from the market due to lack of resources." [3]

Specifications (Eureka)

Data from Ameri-Cana [5]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

The Mitchell U-2 Superwing is an American tailless ultralight aircraft that was designed by Don Mitchell for amateur construction.

<span class="mw-page-title-main">Fisher Avenger</span> Canadian ultralight aircraft

The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.

The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.

The Avid Champion is an American single-seat, high-wing ultralight aircraft that was produced starting in 1998 as a kit by Avid Aircraft of Caldwell, Idaho, later Ennis, Montana.

Ameri-Cana Ultralights was a Canadian aircraft manufacturer that was formed to produce the Ameri-Cana Eureka for the US FAR 103 Ultralight Vehicles category and the American market.

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

The Chotia Gypsy is an American single engine, high-wing, conventional landing gear-equipped ultralight aircraft that was designed by John Chotia in 1980.

The Wings of Freedom Flitplane is an American single-seat, high-wing, single-engine ultralight aircraft that is available as a kit aircraft or as plans for amateur construction from Wings of Freedom of Hubbard, Ohio.

The Fisher FP-303 is a Canadian single-seat, low wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.

<span class="mw-page-title-main">Mini-MAX</span> American kit aircraft

The Team Mini-MAX is a large family of single-seat, mid-wing, strut-braced, single engine aircraft, available in kit form for amateur construction. The first Mini-MAX had its first flight in 1984. Its name indicates its original design goals: a minimum-cost aircraft that requires a minimum of building space, time and skill, but which provides a maximum of enjoyment and performance.

<span class="mw-page-title-main">Sorrell Hiperlight</span> American ultralight biplane

The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction.

The RagWing RW7 Duster is a single seat, low wing, strut-braced, single engine ultralight aircraft designed by Roger Mann and sold as plans by RagWing Aircraft Designs for amateur construction.

The US Light Aircraft Hornet is an American two-seats-in-tandem, pusher configuration, tricycle gear, strut-braced high wing ultralight aircraft, that was produced US Light Aircraft Corporation of Ramona, California between 1994 and circa 2008 in kit form for amateur construction. It was also available as a factory-completed light-sport aircraft.

The Cloudbuster Ultralights Cloudbuster is an American ultralight aircraft that was designed and produced by the Cloudbuster Ultralights Company of Sarasota, Florida in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Goldwing Ltd Goldwing is an American ultralight aircraft that was designed by Craig Catto and Brian Glenn and produced by Goldwing Ltd. The aircraft was supplied as a complete factory-built aircraft only and no kits or plans were offered.

The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.

The American Sportscopter Ultrasport 254 is an American helicopter that was designed and produced by American Sportscopter and first flown in July 1993. The aircraft was produced by Light's American Sportscopter Inc from 1999. The aircraft was supplied as a kit for amateur construction.

References

  1. 1 2 3 4 5 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-17. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. 1 2 Downey, Julia: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 36. Primedia Publications. ISSN 0891-1851
  3. 1 2 3 4 5 6 7 Stark, Wilf (July 2003). "Eureka by Ameri-Cana Ultralights" . Retrieved 26 September 2009.
  4. ↑ Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 113. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  5. 1 2 3 Stark, Wilf (July 2003). "Performance Specifications" . Retrieved 26 September 2009.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.