Murphy JDM-8

Last updated

Murphy JDM-8
Murphy JDM-8 AULA.jpg
JDM-8 advanced ultralight prototype powered by an HKS 700E, with one wing folded
RoleSingle-seat homebuilt Ultralight
National origin Canada
Manufacturer Murphy Aircraft
DesignerDaryl Murphy
First flightMarch 2001 [1]
StatusPrototypes only
Number built2

The Murphy JDM-8 is a Canadian single-seat ultralight monoplane designed by Daryl Murphy. The type was intended to be sold as a kit for home construction by Murphy Aircraft of Chilliwack, British Columbia. [1] [2]

Contents

The designation indicates the designer's initials, J. Daryl Murphy and his eighth design. [1]

Design and development

Work was begun on the JDM-8 design in December 1998, but the project was not a high priority and so did not fly until March 2001. The aircraft was first publicly shown at Sun 'n Fun 2000 when it was not yet complete. [1]

The JDM-8 is an all-metal low-wing cantilever monoplane designed in two variants, one to meet the American FAR 103 Ultralight Vehicles regulations and one for the non-American markets particularly Canada and Europe. [2] The JDM-8 has a conventional landing gear with a tailwheel and can be powered by a Rotax engine from 20-80HP. [2] An unusual feature is the upwards folding wing for storage and transportation. [1] [2]

The fuselage of the JDM-8 is of semi-monocoque aluminum construction. The 5 US gal (19 L) fuel tank is located in front of the instrument panel. The conventional main landing gear for the ultralight version is bungee suspended and includes brakes, while the main landing gear of the homebuilt version is of a sprung design. The tail wheel spring is of 4140 steel and incorporates an inline skate wheel. [1]

The JDM-8 wing is constructed with an aluminum D-cell leading edge incorporating a 9 in (23 cm) high C-channel main spar made from 6061-T6 grade aluminum. The rear spar is a similar C-channel that is 5 in (12.7 cm) high and there is a third nose spar that is 3 in (7.6 cm) in height. The wing aft of the D-cell is covered in aircraft fabric and has a modified NACA 4415 airfoil with a drooped trailing edge. The 11 nose ribs and nine aft wing ribs are made from hydroformed aluminum. The ailerons were adapted from the Murphy Rebel design and are 69 in (175 cm) long with a 15 in (38 cm) chord. The ultralight version has a 4 ft (122 cm) greater wingspan to lower its stall speed to below the US ultralight category limit of 28 mph (45 km/h). With the wings folded the homebuilt version is 8.75 ft (267 cm) high and the ultralight version with its longer wings is 10.9 ft (332 cm) high. [1]

The horizontal tailplane is 95 in (241 cm) in span to allow legal road transportation on a trailer as most jurisdictions limit trailers to 96 in (244 cm). The ultralight version has an ultimate load limit of +5/-2.7 g and an operational limit of +3.8/-1.8g, while the homebuilt version has an ultimate limit of +5.7/-5.7g and an operational limit of +3.8/-3.8 g. [1]

The kit supplied for the JDM-8 was intended to include the parts to make both versions and the manufacturer claimed a construction time from the kit of 800 hours. [3]

The completed prototype JDM-8 was displayed at Sun 'n Fun in April 2004, but due to the introduction in the US of the light-sport aircraft category at the same time, no orders were forthcoming and by 2008 the aircraft was no longer listed as being available by Patterson AeroSales, the manufacturer's sole sales agent. [4]

Operational history

In January 2011 there were two JDM-8s registered in Canada, one a basic ultralight and the other an advanced ultralight, both owned by the manufacturer. [5]

Variants

US ultralight version
Single seat, low-wing monoplane with 24 ft (7.3 m) wingspan, powered by a 28 hp (21 kW) Rotax 277 or other engine of 25 to 30 hp (19 to 22 kW) for the US ultralight category [1]
Homebuilt version
Single seat, low-wing monoplane with 20 ft (6.1 m) wingspan, powered by engines up to 80 hp (60 kW), including the powered by a 60 hp (45 kW) HKS 700E for the Canadian basic ultralight, advanced ultralight or amateur-built categories [1] [6]

Specifications (FAR-103 Variant)

Data fromWorld Directory of Leisure Aviation, [2] Levy [1] and Kitplanes [3]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Murphy Rebel</span>

The Murphy Rebel is a two- or three-seat, strut braced, high wing, taildragger monoplane which is sold in kit form by Murphy Aircraft in Chilliwack, British Columbia, Canada.

The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.

<span class="mw-page-title-main">Fisher Dakota Hawk</span> Canadian homebuilt light aircraft

The Fisher Dakota Hawk is a Canadian side-by-side two-seat, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders.

The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.

<span class="mw-page-title-main">Murphy Maverick</span> Canadian homebuilt light aircraft

The Murphy Maverick is a Canadian two-seat fixed-wing ultralight monoplane designed by Murphy Aircraft of British Columbia. The type is sold as a kit for home construction or as a complete ready-to-fly aircraft.

<span class="mw-page-title-main">Murphy Renegade</span> Type of aircraft

The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.

The Kolb Slingshot is an American tandem two seat, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft, that was produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.

The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.

The Circa Reproductions Nieuports are a family of Canadian 7/8 scale World War I sesquiplane aircraft replicas designed by Graham Lee of Lamont, Alberta for amateur construction from plans sold by Lee's company Circa Reproductions. Leading Edge Air Foils of Peyton, Colorado at one time also made construction kits available. Lee's Nieuports were among the earliest First World War replicas available and paved the way for later companies to produce plans and kits for a great variety of warbirds.

The Pop's Props Cloudster is a single seat, open-cockpit, parasol wing, single-engine monoplane, that was first flown in 1995. The aircraft was produced by Pop's Props of Cooksville, Illinois and made available as plans or in kit form. The company is no longer in business and kit production has been transferred to Simplex Aeroplanes of Old Saybrook, Connecticut.

The Pop's Props Zing is a single seat, open-cockpit, parasol wing, single-engine monoplane, first flown in 1996. The aircraft was designed by Scott Land and produced by Pop's Props of Cooksville, Illinois in the form of plans and an aircraft kit. The company is no longer in business and the aircraft kit is now available from Simplex Aeroplanes of Old Saybrook, Connecticut.

<span class="mw-page-title-main">Rans S-12 Airaile</span> Type of aircraft

The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.

<span class="mw-page-title-main">Flying K Sky Raider</span> Family of ultralight aircraft

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Sport Flight Talon</span> Type of aircraft

The Sport Flight Talon is a high-wing, pusher configuration single-engine, conventional landing gear homebuilt aircraft or ultralight aircraft, that was produced by Sport Flight Aviation of Sandy, Oregon in kit form for amateur construction.

<span class="mw-page-title-main">Earthstar Thunder Gull</span> Type of aircraft

The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.

<span class="mw-page-title-main">Titan Tornado</span> American kit aircraft

The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.

<span class="mw-page-title-main">Murphy Elite</span> Canadian homebuilt light aircraft

The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.

<span class="mw-page-title-main">Bushcaddy R-80</span> Canadian homebuilt light aircraft

The Bushcaddy R-80 is a Canadian ultralight and light-sport aircraft that was designed by Jean Eudes Potvin of Lac Saint-Jean, Quebec in 1994 and produced by his company Club Aeronautique Delisle Incorporated (CADI). It was later built by Canadian Light Aircraft Sales and Service (CLASS) of St. Lazare, Quebec and later Les Cedres, Quebec and now Bushcaddy of Lachute, Quebec.

References

Notes
  1. 1 2 3 4 5 6 7 8 9 10 11 Levy, Howard: Daryl Murphy's Latest, Kitplanes, Volume 20, Number 1, January 2003, pages 10-12. Primedia Publications. ISSN 0891-1851
  2. 1 2 3 4 5 "World Directory of Leisure Aviation 2004/2005". World Directory of Light Aviation. Pagefast Ltd, England: 152. 2004. ISSN   1368-485X.
  3. 1 2 Downey, Julia: 2002 Kit Aircraft Directory, Kitplanes, Volume 18, Number 12, December 2001, page 55. Kitplanes Acquisition Company. ISSN 0891-1851
  4. ↑ Patterson Aerosales (January 2011). "Patterson Aerosales" . Retrieved 5 January 2011.
  5. ↑ Transport Canada (January 2011). "Canadian Civil Aircraft Register". Archived from the original on 18 July 2011. Retrieved 6 January 2011.
  6. ↑ Transport Canada (September 2010). "Listing of Models Eligible to be Registered as Advanced Ultra-Light Aeroplanes (AULA)" . Retrieved 5 January 2011.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.