Zenair Zipper

Last updated

Zipper
Role Ultralight aircraft
National origin Canada
Manufacturer Zenair
Designer Chris Heintz
Introduction1983
Primary userprivate owners

The Zenair Zipper is a Canadian ultralight high-wing, single seat aircraft that was designed by Chris Heintz and produced by Zenair.

Contents

The Zipper is a highly innovative design that strongly emphasizes portability over speed or carrying capacity. [1]

Development

The Zipper was designed in the early 1980s by established Canadian aircraft designer Chris Heintz and put into production by his company Zenair, of Midland, Ontario. Heintz's motivation for the Zipper was the ultralight aviation boom that was occurring in Canada at that time and the introduction of new aviation regulations by Transport Canada legally permitting the operation of ultralights.

The Zipper incorporates many unique features, all aimed at making the aircraft more portable. This focus was due to the nature of operations in the early days of the ultralight popularity. Aircraft were not flown great distances to fly-ins or other sites, but were transported by trailer or on car top to be flown locally at remote locations. [1]

The Zipper has a quick-folding wing, built around a D-cell leading edge and spar. There are no wing ribs and the trailing edge of the wing is established by a cable which tensions the sailcloth wing covering. The wing is folded by releasing the anti-drag cables next to the nosewheel and folding the wings back along the tailboom, still supported by their struts. The wing is designed to +6 and -3 g. [1]

The Zipper features conventional three-axis controls, which was unusual in ultralights designed at this time. The all-metal, one piece, all-flying rudder and the elevator are quickly removable for transport. The tailboom is aluminum and square in cross section. [1]

The standard powerplants provided with the Zipper kits were the JPX PUL 425 engine of 26 hp (19 kW) and the Rotax 277 of 28 hp (21 kW). Fuel capacity is 6 US gal (5 imp gal; 23 L). The twin-engined Zipper II used a similar engine configuration to its competitor, the Ultraflight Lazair, placing both engines close together to minimize engine-out requirements. [1]

Operational history

Zenith Aircraft Company President Sebastien Heintz, son of the designer Chris Heintz, learned to fly in a Zenair Zipper. [2]

In December 2008 there were four Zippers still registered in Canada. Consisting of two Zippers, one Zipper-RX and one Zipper II [3]

Variants

Zipper
Powerplant is one JPX PUL 425 or 212 [3]
Zipper-RX
Powerplant is one Rotax 277 engine of 28 hp [3]
Zipper II
Powerplants are two JPX PUL 212. There were 12 built. [3] [4]

Specifications (Zipper PUL 425 engine)


Data fromUltralight Aircraft Shopper's Guide 8th Edition [1]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

Eipper Quicksilver

Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.

Zenith STOL CH 701

The Zenith STOL CH 701 and CH 750 are a family of light, two-place kit-built STOL aircraft designed by Canadian aeronautical engineer Chris Heintz through his Midland, Ontario based company, Zenair. The CH 701 first flew in 1986 and the design is still in production. The CH 750 was first introduced in 2008. The CH 701 was later developed into the four-place Zenith STOL CH 801.

The AmEagle American Eaglet was a highly unorthodox ultralight sailplane marketed in the U.S. for homebuilding. It was a one-seat, high-wing braced monoplane that carried an inverted V-tail on a long boom extending from a pod-like fuselage. Intended for self-launching, it was equipped with a McCulloch go-kart engine and a folding propeller behind the cabin. Its first flight was on 19 November 1975, and by 1978, at least 250 sets of plans had been sold, with 12 aircraft reportedly completed.

The Birdman TL-1 was an extremely minimalist aircraft sold in kit form in the United States in the mid-1970s for US$1,395.

Ultraflight Lazair

The UltraFlight Lazair is a family of Canadian designed and built twin-engine ultralight aircraft that were sold in kit form between 1979 and 1984.

Chotia Weedhopper American ultralight airplane

The Weedhopper is an American high-wing, tractor configuration, tricycle gear, two-axis control ultralight aircraft originally developed by John Chotia during the height of the 1970s ultralight boom and introduced in 1977. When it was in production the aircraft was sold as a kit for amateur construction and could be assembled in 25-30 man-hours.

Jean St-Germain Raz-Mut Ultralight aircraft developed in Canada in the 1970s

The Jean St-Germain Raz-Mut was an ultralight aircraft developed in Canada in the 1970s and marketed in kit form for homebuilding.

Blue Yonder EZ Flyer Canadian ultralight aircraft

The Blue Yonder EZ Flyer is a Canadian-designed-and-built, tandem two-seat, open cockpit, pusher configuration, recreational and training aircraft provided as a completed aircraft or in kit form by Blue Yonder Aviation.

Blue Yonder Twin Engine EZ Flyer Canadian ultralight aircraft

The Blue Yonder Twin Engine EZ Flyer is a Canadian designed and built, pusher configuration twin-engined, tandem two-seat, open cockpit aircraft provided as a completed aircraft or in kit form by Blue Yonder Aviation.

The Blue Yonder EZ King Cobra is a Canadian designed and built, single-engined, single-seat aircraft provided as a completed aircraft or in kit form by Blue Yonder Aviation. The aircraft is approximately a 60% scale replica of the Second World War Bell P-63 Kingcobra fighter.

The Beaujon Enduro is a single-seat, American high-wing, pusher configuration ultralight aircraft. The Enduro was introduced in 1978 and remains available as plans from Beaujon Aircraft of Ardmore, Oklahoma.

The Beaujon Mach .07 is a single-seat, American high-wing, tractor configuration ultralight aircraft. The aircraft is available as plans from Beaujon Aircraft of Ardmore, Oklahoma.

Spectrum Beaver

The Spectrum Beaver is a family of single- and two-place, pusher configuration, high-wing ultralight aircraft that were first introduced by Spectrum Aircraft of Surrey, British Columbia, Canada, in 1983.

The Chotia Gypsy is an American single engine, high-wing, conventional landing gear-equipped ultralight aircraft that was designed by John Chotia in 1980.

The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.

JPX PUL 425

The JPX PUL 425, also called simply the JPX 425, is a French twin-cylinder, horizontally opposed, two-stroke aircraft engine.

The Kolb Flyer is an American single seat, high wing, strut-braced, twin-engine, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania, and intended for amateur construction.

The Kolb Ultrastar is an American single seat, high wing, strut-braced, single engine, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

Milholland Legal Eagle American ultralight aircraft design

The Milholland Legal Eagle is an American high wing, strut-braced, single engine, tractor configuration, conventional landing gear-equipped ultralight aircraft that is available as plans from Better Half VW of Brookshire, Texas and also produced in kit form by J&N Bolding Enterprises of Baytown, Texas and intended for amateur construction.

Aurore MB 02 Souricette

The Aurore MB 02 Souricette is a French ultralight aircraft, designed by Michel Barry and produced by Aurore Sarl of Sauvagnon. The aircraft is supplied as a kit or as plans for amateur construction.

References

  1. 1 2 3 4 5 6 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-46. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. Burroughs, John (September 1994). "Zenith Aircraft Company Factory Visit" . Retrieved 7 February 2010.
  3. 1 2 3 4 Transport Canada (December 2008). "Civil Aircraft Register". Archived from the original on 20 December 2008. Retrieved 1 December 2008.
  4. Therrien, Michel (2003). "Zodiac's Tips" . Retrieved 2 December 2008.