Chotia Weedhopper | |
---|---|
Weedhopper | |
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Weedhopper Aircraft |
Designer | John Chotia |
Introduction | 1977 |
Status | Production completed |
Produced | 1977-2012 |
Number built | 13,000 (2007) [1] |
Variants | Chotia Woodhopper Cyclone AX2000 Flylab Tucano Raj Hamsa X-Air |
The Weedhopper is an American high-wing, tractor configuration, tricycle gear, two-axis control ultralight aircraft originally developed by John Chotia during the height of the 1970s ultralight boom and introduced in 1977. When it was in production the aircraft was sold as a kit for amateur construction and could be assembled in 25-30 man-hours. [1] [2] [3] [4] [5] [6] [7] [8] [9] [10]
By early 2013 the company website had been blanked and put up for sale and it is likely that the company has closed and production ended. [11]
Many of the early ultralights used a "weight shift" method of control, requiring the pilot to push a control bar to shift the center of gravity of the aircraft. The Weedhopper differed from most other ultralights of the period in that it has a control stick which moves the rudder and elevator, giving it two axis control in pitch and yaw. The pronounced dihedral of the wings, along with the swept leading edge causes it to bank into the turn, and results in a very stable, easy-to-fly aircraft. The Weedhopper differs from many of the other early ultralights in that it had a strut-braced wing, whereas most period ultralights have wire-braced wings. [2]
The Weedhopper is constructed from aluminium tubing and covered with Dacron pre-sewn envelopes. The early versions of the aircraft developed a poor reputation due to the lack of reliable engines available in the 1970s. This was rectified with the adoption of the Rotax 277 28 hp (21 kW) and later the Rotax 447 40 hp (30 kW) powerplant. [2] [12]
Over 13,000 Weedhoppers have been sold. It was popular because it offered people an inexpensive way to fly for pleasure. The aircraft could be easily disassembled and put on a trailer for home storage. It was not necessary to rent an expensive hangar. It could also be flown from just about any field because of its short takeoff and landing requirements (about 100 feet (30 m) with no obstacles). The kits originally sold for $2,000, and in 2011 the Weedhopper model 40 sold for US$8,495. [2] [1] [13]
In its home country versions of the aircraft are eligible for the FAR 103 Ultralight Vehicles category, the experimental amateur-built category and the light-sport aircraft category. [10]
Data from Weedhopper Aircraft [3]
General characteristics
Performance
Avionics
The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.
Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Freebird I is an American single-seat, high wing, tricycle gear, single engined pusher configuration ultralight kit aircraft designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina and later also produced by Pro Sport Aviation of Wingate, North Carolina.
The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.
The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.
The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction.
The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.
The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.
The North Wing Maverick is an American single-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.