Hiperlight | |
---|---|
Role | Ultralight aircraft |
National origin | United States |
Manufacturer | Thunderbird Aviation |
Designer | Sorrell brothers |
First flight | 1982 |
Introduction | 1982 |
Status | In production |
Number built | 603 (SNS-8, Dec 2011) 26 (SNS-9, Dec 2011) [1] |
Developed from | Sorrell Hiperbipe |
The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction. [1] [2] [3] [4] [5]
The design was sold initially by Sunrise Aircraft of Sheridan, Oregon and as of May 2022 was produced by Thunderbird Aviation of Ray, Michigan. [2] [3] [4] [5] [6]
The single seat SNS-8 Hiperlight was designed by the Sorrell brothers in 1982 at the request of the US Rotax engine distributor to provide an enclosed cockpit aircraft design to utilize the 28 hp (21 kW) Rotax 277 engine. The resulting aircraft was a scaled-down version of the very successful Sorrell Hiperbipe aerobatic cabin biplane and with an empty weight of 247 lb (112 kg) fit the US ultralight category. The series designation of "SNS" stands for Sorrell Negative Stagger. [2] [7]
The aircraft is described as easy to fly, with light control forces and well balanced controls. The aircraft has full-span ailerons on the bottom wing that droop together when the stick is pulled back, giving the same effect as flaps in the landing flare. [2]
28 hp (21 kW) is sufficient to power the design and it does not require larger engines. Since the Rotax 277 has been out of production for many years engines such as the 2si 460 or Hirth F-33 are often used. [2]
The aircraft features a welded steel tube forward fuselage, with a detachable aluminium tube aft fuselage. The rear fuselage can be easily removed for transport or storage in ten minutes. The wings are also constructed from aluminium tubes and the whole aircraft is covered in aircraft fabric. The SNS-8 has a maximum pilot weight of 230 lb (104 kg). [2] [3] [4]
The SNS-8 kit was estimated as taking 200–300 hours to assemble. [2]
Sunrise Aircraft developed the single seat SNS-8 into the SNS-9 two-seater. The SNS-9 is minimally larger with a wingspan of 23.4 ft (7.1 m) versus the SNS-8's 22 ft (6.7 m), length increased from 15.6 ft (4.8 m) to 18 ft (5.5 m) and gross weight increased from 500 lb (227 kg) to 814 lb (369 kg). The SNS-9 uses the 50 hp (37 kW) Rotax 503 as its standard powerplant and had an optional Wankel engine available. [2] [5]
Data from Cliche and Kitplanes [2] [3] [4] [5]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.
The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.
The Fisher FP-303 is a Canadian single-seat, low wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher Celebrity is a Canadian two-seat, conventional landing gear, single engined, biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States but the company is now located in Dorchester, Ontario, Canada.
The Fisher Classic is a Canadian two-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft is a two-seat derivation of the Fisher FP-404. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.
The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.
The Murphy Renegade is a family of Canadian two-seats-in-tandem, single engine, conventional landing gear, biplanes, produced by Murphy Aircraft and intended for amateur construction.
The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.
The Kolb Firefly is an American open cockpit, single seat, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction. The aircraft was designed in 1995.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Arnet Pereyra Sabre II is an American, two-seats in side-by-side configuration, conventional landing gear-equipped, strut-braced, high-wing ultralight trainer that was produced by Arnet Pereyra Inc of Rockledge, Florida in kit form for amateur construction.
The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.