| Sorrell SNS-7 Hiperbipe | |
|---|---|
 | |
| Role | Homebuilt aircraft |
| National origin | United States |
| Manufacturer | Sorrell Aviation Thunderbird Aviation |
| Designer | Sorrell brothers |
| Introduction | 1973 |
| Status | In production (2019) |
| Variants | Sorrell Hiperlight |
The Sorrell SNS-7 Hiperbipe is a two-seat, negative stagger, conventional landing gear-equipped cabin biplane designed for amateur construction that was produced in kit form by Sorrell Aviation of Tenino, Washington and since 2015 by Thunderbird Aviation. [1]
The SNS-7 (Sorrell Negative Stagger, Model 7) was intended to give full unlimited aerobatic performance without sacrificing the comforts of a cabin-style aircraft. [1]
The Sorrell family originated from the state of Oregon, which was the last state to ban homebuilt aircraft. Hobie Sorrell petitioned congress for experimental aircraft regulations, and his son Tim designed the Hiperbipe in a series of family designed homebuilt aircraft. [2] The design is of mixed construction. The fuselage, tail, engine mount, landing gear mounts, interplane struts and flight controls are all built from welded 4130 steel. The wings are made from wood, with wooden stressed skin. The landing gear is sprung steel tube. The engine cowling and wheel pants are fibreglass. The whole airframe is covered in doped aircraft fabric, including the plywood-covered wings. The airfoil is a custom symmetrical design. [1] [3]
The SNS-7 is capable of advanced aerobatics, including vertical eight point rolls and inside and outside vertical eights. [1]
The tooling and manufacturing rights were acquired by Thunderbird Aviation in 2015, who began making parts and basic kits. [4]
In April 2010 there were 22 Hiperbipes registered in the United States, two in Canada, and one in the United Kingdom. [5] [6] [7]
Data from Plane & Pilot [1] and Pilot Friend [8]
General characteristics
Performance
Related development
Aircraft of comparable role, configuration, and era
The Berkut 360 is a tandem-seating, two-seat homebuilt canard aircraft with pusher configuration and retractable landing gear, built primarily of carbon fiber and fiberglass.
The Bradley BA 100 Aerobat is an American aerobatic homebuilt aircraft that was designed and produced by Bradley Aerospace of Chico, California. When it was available the aircraft was supplied as a kit for amateur construction.
The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction.
The Sorrell SNS-2 Guppy is an American single-seat, negative stagger, cabin biplane designed for amateur construction that was produced in kit form by the Sorrell Aircraft Company of Tenino, Washington. As of 2019 plans were available from Thunderbird Aviation of Ray, Michigan.
The Polen Special, is a homebuilt racing aircraft built to become the fastest four cylinder aircraft in the world.
The Harmon Der Donnerschlag is an American homebuilt aircraft that was designed and produced by Harmon Engineering of Howe, Texas. The aircraft was intended for amateur construction.
The Merkel Mark II is an American homebuilt aerobatic biplane that was designed by Edwin Merkel and produced by the Merkel Airplane Company of Wichita, Kansas in the form of plans for amateur construction.
The Rihn DR-107 One Design is an American aerobatic homebuilt aircraft that was designed by Dan Rihn and first flown in 1993. The aircraft is supplied by Aircraft Spruce & Specialty of Corona, California in the form of plans and a materials kit for amateur construction.
The Rihn DR-109 is an American aerobatic homebuilt aircraft that was designed by Dan Rihn. The aircraft was supplied by Jim Kimball Enterprises of Zellwood, Florida and more recently by Ashcraft Aero Works of Aurora, Illinois in the form of plans. It was designed for competition aerobatics as well as a trainer for the Rihn DR-107 One Design.
The Giles G-200 is an American aerobatic homebuilt aircraft that was produced by AkroTech Aviation of Scappoose, Oregon. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft or a kit for amateur construction. The first customer-built aircraft made its first flight on May 26, 1996. AkroTech Aviation went out of business and the design is no longer in production.
The Bagalini Colombo is an Italian homebuilt aircraft that was designed by Marino Bagalini. The aircraft is supplied in the form of plans for amateur construction.
The CEI Free Spirit Mk II, also called the Cabrinha Free Spirit Mark II and the Cabrinha Model 423, is a three-seat American homebuilt aircraft that was designed by Richard Cabrinha and produced by CEI of Auburn, California, introduced at AirVenture in 1995. The aircraft was intended to be supplied as a kit for amateur construction, but only prototypes seem to have been completed.
The Collins Dipper was an American homebuilt flying boat that was designed and produced by Collins Aero of Chadds Ford, Pennsylvania and first flown in 1982. The aircraft was supplied in the form of plans for amateur construction. Only one was built and none remain registered.
The Storm 300 is an Italian homebuilt aircraft that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.
The Storm 320E, sometimes written Storm 320 E, is an Italian microlight aircraft that was designed and produced by Storm Aircraft of Sabaudia. Storm Aircraft was originally called SG Aviation srl. When it was available the aircraft was supplied as a kit for amateur construction.
The SkyDancer SD-260 was an American aerobatic homebuilt biplane that was designed and produced by SkyDancer Aviation of Louisville, Kentucky, introduced in the mid-1990s. When it was available the aircraft was supplied as a kit.
The Starfire Firebolt, sometimes called the Starfire Firebolt Convertible, due to its removable canopy, is an American homebuilt aerobatic biplane that was designed by G. H. "Mac" McKenzie and produced by Starfire Aviation of Tempe, Arizona. When it was available the aircraft was supplied in the form of plans for amateur construction, with some pre-fabricated parts available.
The Stolp SA-900 V-Star is an American aerobatic homebuilt biplane, currently produced by Aircraft Spruce & Specialty Co in the form of plans for amateur construction. In the 1990s it was also available as a kit from Stolp Starduster Corporation of Riverside, California.
The Tri-R KIS TR-1 is an American homebuilt aircraft that was designed by Rich Trickel and produced by Tri-R Technologies of Oxnard, California, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
The American Homebuilts John Doe is an American STOL homebuilt aircraft that was designed by Steve Nusbaum and produced by American Homebuilts of Hebron, Illinois, first flown in 1994. When it was available the aircraft was supplied as a kit for amateur construction.
