| Kolb Mark III | |
|---|---|
 | |
| Kolb Mark III | |
| Role | Ultralight aircraft |
| National origin | United States |
| Manufacturer | New Kolb Aircraft |
| Status | In production |
| Number built | 100 (Dec 2011) [1] |
| Variants | Precision Tech Fergy |
The Kolb Mark III is a family of American side-by-side two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky, and intended for amateur construction. [1] [2] [3] [4] [5]
The Mark III's standard engine was originally the 64 hp (48 kW) Rotax 582 engine, but the current engines offered are the 80 hp (60 kW) Rotax 912UL or the 100 hp (75 kW) Rotax 912ULS. In its home country the aircraft is normally licensed in the Experimental - amateur-built category. [2] [3] [4] [5]
The design features a forward fuselage of welded 4130 steel tubing, mated to an aluminum tailboom. The horizontal stabilizer, tail fin and wings are also constructed of riveted aluminum tubing with all flying surfaces covered in doped aircraft fabric. The wings and horizontal tail are quick-folding for storage and ground transport. The original Mark III can be made ready to fly from trailering in eight minutes by one person without the use of tools, while the newer M3X variant is rated at 15 minutes to assemble for flight. [2] [3] [4] [5]
The landing gear is sprung tubing for the main gear, with a steerable sprung tailwheel and the cabin is 45 in (114 cm) in width. [3] [4]
Factory options include brakes, Ballistic Recovery Systems airframe parachute and powder coating of the steel parts. The manufacturer describes the aircraft as STOL, with a 200 ft (61 m) take-off run. [6] [5]
In reviewing the aircraft Andre Cliche said:
The Twinstar Mk III is a very clean and aerodynamic design. lt looks fast and flies fast. With standard dual controls, it can be used as a trainer, but it is most often used as a cross-country cruiser. It is especially desirable for its folding wings. [3]
Data from Kitplanes, Cliche and Purdy [2] [3] [4]
General characteristics
Performance
Avionics
Related development
Aircraft of comparable role, configuration, and era
The Aero Adventure Aventura is a family of ultralight amphibians marketed as a kit aircraft by Aero Adventure of DeLand, Florida. The aircraft was designed by Bob Bailey in 1995.
Quicksilver is a line of single and two-place high wing, single-engine, ultralight aircraft that evolved from weight-shift hang gliders including Bob Lovejoy's High Tailer.
The Rans S-6 Coyote II is an American single-engined, tractor configuration, two-seat, high-wing monoplane designed by Randy Schlitter and manufactured by Rans Inc. The Coyote is available in kit form for amateur construction or as a completed light-sport aircraft.
The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.
The Capella Javelin is a family of American open cockpit, high wing, tractor configuration, conventional landing gear-equipped ultralight aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.
The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.
The Kolb Slingshot is an American tandem two seat, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft, that was produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.
The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.
The Phantom X1 is a single-engined, tractor configuration, single seat, cable-braced high wing tricycle gear-equipped ultralight aircraft that is produced by Phantom Aeronautics of Three Rivers, Michigan and available in kit form.
The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The Precision Tech Fergy F-II B is a two-seat side-by-side, conventional landing gear, strut-braced, high-wing, pusher configuration ultralight aircraft that was manufactured by Ferguson Aircraft and later Precision Tech Aircraft in kit form for amateur construction. The aircraft is out of production and no longer available.
The US Light Aircraft Hornet is an American two-seats-in-tandem, pusher configuration, tricycle gear, strut-braced high wing ultralight aircraft, that was produced US Light Aircraft Corporation of Ramona, California between 1994 and circa 2008 in kit form for amateur construction. It was also available as a factory-completed light-sport aircraft.
The Buzzman L'il Buzzard is a Canadian, two seat side-by-side configuration, high wing, strut-braced, conventional landing gear, tractor configuration, ultralight aircraft, originally manufactured by Buzzman ARVS and later by L'il Hustler Ultralight Aviation of Holland Landing, Ontario. The aircraft is sold mostly assembled, less only paint, engine and instruments.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The Blue Yonder Merlin is a Canadian-designed and -built two-seat, high-wing monoplane with taildragger undercarriage. It can be built as a basic ultra-light, an advanced ultra-light or amateur-built aircraft.
The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.
The Mainair Blade is a British ultralight trike that was designed and produced by Mainair Sports and later P&M Aviation. The aircraft was supplied as a completed aircraft.
The Norman Aviation Nordic 8 Mini Explorer is a Canadian ultralight aircraft, designed and produced by Norman Aviation of Saint-Anselme, Quebec. The aircraft is supplied as a kit for amateur construction.
