Dart Skycycle

Last updated

Dart Skycycle
Role Ultralight aircraft
National originUnited States
Manufacturer Dart Aircraft
DesignerRobert Dart
Introduction1985
StatusProduction completed

The Dart Skycycle is an American single-seat, high wing, strut-braced, single-engine, conventional landing gear ultralight aircraft that was designed by Robert Dart and produced by Dart Aircraft of Mayville, New York for amateur construction. [1]

Contents

Design and development

Introduced in 1985, the Skycycle is a single-seater designed as an FAR 103 Ultralight Vehicles-compliant aircraft with an empty weight within that category's 254 lb (115 kg) empty weight limit. [1]

The aircraft has a 4130 steel tube frame fuselage and a wing constructed from spruce, all covered in doped fabric. The landing gear is bungee-suspended. The Skycycle can be built with an open cockpit or fully enclosed, allowing flying in cooler weather. The Skycycle was available as plans only or with some prefabricated components, such as the welded fuselage or assembled wings already completed. The standard engine specified was the 28 hp (21 kW) Rotax 277. [1]

Reviewer Andre Cliche wrote: "The Skycycle is an ultralight-legal aircraft that resembles the average taildraggers of the 40s and 50s. It looks like a 'real airplane' and should satisfy the more conservative pilots who hesitate to fly 'colourful lawn chairs' as basic ultralights are sometimes called. It is a good all-around ultralight that is easy to fly and cheap to operate." [1]

Specifications (Skycycle)

Data from Cliche [1]

General characteristics

Performance

See also

Aircraft with the same name:

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">ISON Airbike</span> Type of aircraft

The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996.

The Adams CA-2 is a single seat, low-wing, American ultralight aircraft that was designed by Frank Griffith of Corning Aircraft around 1992 and was available as plans for amateur construction until 1999. In 1999, Hummel Aviation of Bryan, Ohio began offering the design. Although the design was well received, plans were no longer listed as being available from Hummel Aviation as of 2007.

The Avid Champion is an American single-seat, high-wing ultralight aircraft that was produced starting in 1998 as a kit by Avid Aircraft of Caldwell, Idaho, later Ennis, Montana.

The Fisher FP-303 is a Canadian single-seat, low wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

<span class="mw-page-title-main">Fisher FP-404</span> Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States, but the company is now located in Woodbridge, Ontario, Canada.

<span class="mw-page-title-main">Hipp's Superbirds J-3 Kitten</span> Type of aircraft

The Hipp's Superbirds J-3 Kitten and related designs are a family of single-engined, single seat, high wing conventional landing gear-equipped aircraft available in kit form or as plans from Hipp's Superbirds of Saluda, North Carolina.

The Capella Javelin is a family of American open cockpit, high wing, tractor configuration, conventional landing gear-equipped ultralight aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.

<span class="mw-page-title-main">Kolb Firestar</span> Type of aircraft

The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

The Wood Sky Pup is an American single-seat, high wing, cantilever, single engine, conventional landing gear ultralight aircraft that was designed by Stephen K. Wood of Whitewater, Colorado for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Aerotique Parasol</span> American ultralight aircraft

The Aerotique Parasol is an American parasol-wing, strut-braced, conventional landing gear, single-seat, open cockpit, single engine in tractor configuration, ultralight aircraft that was designed as an ultralight version of the 1926 vintage Heath Parasol. It was originally produced by Yesteryear Aviation and later by Aerotique Aviation. The aircraft was supplied as factory-built only.

The Aircore Cadet is an American ultralight aircraft that was designed by Jim Scott and produced by Aircore Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.

The Teman Mono-Fly is an American ultralight aircraft that was designed by structural engineer Bob Teman and produced by Teman Aircraft Inc. The aircraft was supplied as a kit for amateur construction and later as a factory-completed aircraft.

The V-STOL Solution is an American ultralight aircraft that was designed by Dick Turner in 1998 and produced by V-STOL Aircraft. The aircraft was supplied as a kit for amateur construction.

The Ultra-Fab Sundowner, also called the Sundowner Convertible, is an American ultralight aircraft that was designed by Bob Leinen and produced by Ultra-Fab. The aircraft was supplied as a kit for amateur construction.

The Lookout Mountain SkyCycle, also marketed as The Freedom Machine, is an American ultralight trike that was designed by Matt Taber, produced by Lookout Mountain Flight Park of Rising Fawn, Georgia and introduced in 1997. The aircraft was supplied as a kit for amateur construction and also as plans.

The Fly Hard Trikes SkyCycle is an American ultralight trike, designed by Mike Theeke and produced by Fly Hard Trikes of Wildwood, Georgia. The aircraft is supplied as a complete ready-to-fly-aircraft and several hundred have been completed and flown.

References

  1. 1 2 3 4 5 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-53. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4