Denney Kitfox

Last updated
Kitfox
Denney Kitfox Mk II C-FMLC 01.JPG
Denney Kitfox Model 2
Role Kit aircraft
National originUSA
Manufacturer Denney Aerocraft
SkyStar Aircraft
Kitfox Aircraft
Designer Dan Denney
First flightNovember 1984
Introduction1984
Produced1984–present
Number built4500+ kits delivered [1]
Developed into Aeropro Eurofox, Apollo Fox
Rocky Mountain Wings Ridge Runner
Denney Kitfox Model 2, built in 1992 Denney.kitfox.model2.g-btvc.arp.jpg
Denney Kitfox Model 2, built in 1992
Denney Kitfox Model 3, built in 1993 Kitfox III (N27DN).jpg
Denney Kitfox Model 3, built in 1993
A Skystar Kitfox Model 4 registered as a Canadian Advanced Ultra-light Aeroplane. Skystar Kitfox Model IV C-IGVW 01.JPG
A Skystar Kitfox Model 4 registered as a Canadian Advanced Ultra-light Aeroplane.
A Skystar Kitfox Lite at Oshkosh 2001 KitfoxLiteSquared0002.JPG
A Skystar Kitfox Lite at Oshkosh 2001
SkyStar Kitfox Series 6 SkyStar Kitfox Series 6 C-GKXX 1771.JPG
SkyStar Kitfox Series 6
SkyStar Kitfox Series 7, built in 2004 Skystar.kitfox.mk7.arp.jpg
SkyStar Kitfox Series 7, built in 2004
A Belite ultralight Belite Aircraft.JPG
A Belite ultralight

The Denney Kitfox is a series of small side-by-side, two-seat, high-wing, single engine kit aircraft, designed and originally manufactured by Dan Denney and his company Denney Aerocraft of Boise, Idaho. [2] The aircraft is amateur-built and not type-certified. Over 4500 kits have been delivered in 42 different countries. [1]

Contents

A derivative of the Avid Flyer, [3] the Kitfox was an early kit plane to feature quickly-folding wings that greatly simplify carriage and storage. [4] The appeal of the aircraft was that it could be built in a two-car garage. Then it would be towed to the airport with the wings folded. The landing gear may be easily converted to floats or skis.

Development and history

First flown in November 1984 from the Denney Aerocraft factory in Boise, the Model 1 Kitfox was a two-seat STOL taildragger aircraft capable of flying from unimproved strips. The design was originally intended to use a new radial engine then in development and the early Kitfoxes had round cowls with bumps to accommodate the cylinder heads. Although this radial engine did not materialize, and a Rotax two-stroke engine was adapted instead, the "retro" radial cowling proved popular and was retained on many models. In 1984 a total of six Model 1 Kitfoxes were delivered and then the model range was expanded to include the improved Models 2, 3, 4, and Classic 4. [2] [5]

In June 1992 Denney Aerocraft sold the rights to the design to SkyStar Aircraft. Skystar started work on a new aircraft, the Kitfox Series 5. This aircraft was designed to be larger, with an increased useful load, cabin and cargo space, and to use certified aircraft engines. The Series 5 was produced as a conventional landing gear-equipped aircraft with the names Outback and Safari and also as a tricycle gear aircraft, the Vixen and Voyager. An employee consortium took over SkyStar Aircraft in January 2000, and this reorganized company launched the Kitfox Series 6. Later in 2000 the company also introduced the Kitfox "Lite Squared", a lightened version of the Kitfox Classic 4, as a two-seat ultralight trainer for the single-seat ultralight Kitfox Lite. [2]

In 2002, SkyStar introduced the Kitfox Series 7. This aircraft can cruise at speeds in excess of 150 miles per hour (241 km/h), with a service ceiling above 25,000 feet (7,620 m). [6] The Series 7 design conformed to the then-proposed Federal Aviation Administration Light Sport Aircraft category better than did the Lite Squared and it became the company's main model. As the LSA rules were further developed and gross weights increased, it became evident that a special version of the Kitfox Series 7, to be known as the Kitfox Sport, would not be needed and that all three Kitfoxes then in production — the Lite, Classic 4 and Series 7 — would meet the revised LSA category definition. [2]

In late 2005 SkyStar Aircraft filed for bankruptcy. In April 2006, the assets of Skystar were purchased by Kitfox Aircraft, a newly formed company owned by John and Debra McBean. John McBean is a former SkyStar employee, having left the company in 2003. [2] [5]

Variants

Model 1
Original 1984 model with radial engine cowl and 64 hp (48 kW) Rotax 532 as the standard engine. A total of 257 kits were produced. [7]
Model 2
The larger, wider Kitfox Model 2 was introduced in 1989 and available with the 64 hp (48 kW) Rotax 582 engine. The gross weight was increased to 950 lb (431 kg). 490 were produced. [8]
Model 3
The Kitfox Model 3 features structural changes that were designed to improve flight characteristics and provide a better platform for more powerful engines including the 80 hp (60 kW) Rotax 912. A total of 466 were produced. [9]
Model 4-1050
The Kitfox Model 4 was a new design introduced in 1991. It incorporated a laminar flow airfoil, new flaperon design, metal flaperon attach brackets and a new 2:1 differential aileron control system. The gross weight of the Kitfox Model 4-1050 was the same as the Model 3, 1,050 lb (476 kg). The Model 4 standard engines include the 80 hp (60 kW) Rotax 912 and the 100 hp (75 kW) Rotax 912S. 322 were built. [10]
Model 4-1200 (Classic IV)
The Kitfox Model 4-1200, also known as the Classic 4, is the final version of the original 1984 Denney Kitfox. Introduced in 1991, the Classic 4 has stronger lift struts, gear legs, and fuselage carry-through tubes, which allow a gross weight of 1,200 lb (544 kg). The vertical stabilizer and rudder height was increased by 10 inches (25 cm), and the rudder width was increased by 2 inches (5 cm). [10]
Model 4 Speedster
A variant of the Classic 4 with a shorter wing for a higher cruise speed and roll rate. [10]
Kitfox XL
A lightweight variant of the Classic 4 introduced in 1994, with the 50 hp (37 kW) Rotax 503 as the standard power plant. The aircraft was intended as an ultralight trainer, but did not sell well. [10]
Kitfox Lite
Single-seat ultralight design for the United States market by Skystar Aircraft. The Lite features similar styling to larger Kitfoxes, including the radial-style cowling, folding wings and Junkers flaperons. Original engine was a special model of the 2si 460-F35 two-cylinder, two-stroke powerplant converted to free-air cooling and direct drive, producing 28 hp (21 kW) [11]
Kitfox Lite2
An upgraded variant of the Kitfox XL, introduced in 2001. Powered by a 50 hp (37 kW) Rotax 503, the Lite2 also features the popular radial-style cowling, flaperons and a welded steel tube fuselage, all covered in Stits Aircraft Polyfiber aircraft fabric. The aircraft was a success and sold well as both a complete aircraft and as a kit plane. [10] [12] [13] [14]
Series 5 (Safari, Vixen, Outback, Voyager)
Intended to use Continental and Lycoming certified engines in addition to the Rotax 912 engines, the Series 5 was introduced in 1994. The tailwheel version was named the Safari and the tricycle gear version was named the Vixen. The Vixen incorporated a swept tail, which was a cosmetic change that did not affect performance. Gross weight was initially 1,400 lb (635 kg), increased in 1995 to 1,550 lb (703 kg). In 1998, the marketing name of the Safari was changed to Outback and the Vixen to Voyager. [15]
Series 5 Speedster
A variant of the Series 5 with a shorter wing for a higher cruise speed. [15]
Series 6
Introduced in 2000, the Series 6 has a useful load of up to 800 lb (363 kg), a range of over 700 miles (1,127 km) and cruising speeds of over 120 mph (193 km/h). The aircraft can be converted from tricycle gear to tailwheel and back again. [16]
Series 7
The Series 7 introduced a number of refinements, including a cruise speed of over 120 mph (193 km/h), a 700 miles (1,127 km) range and carry a useful load of 700 lb (318 kg). When equipped with the Rotax 914 turbo-charged engine, the aircraft has a service ceiling of 25,000 feet (7,600 m). Other engines available include Continental, Lycoming, Rotax 912S, Rotec R2800, Jabiru 3300 and the Rotax 915is engine. In the United States Light Sport Aircraft category it is marketed as the Super Sport. The construction time from the factory-supplied kit is estimated at 1000 hours. [13] [17] [18] [19] [20]

Series 7 STI

A version of the Series 7 with a larger airfoil to increase STOL (short take-off and landing) performance. [21]

Series 7 Speedster

A version of the Series 7 with shorter wings to increase speed much like the Series 4 Speedster. [22]

Kitfox SLSA
Version of the Series 7 for the light sport aircraft market, with 1,320 lb (599 kg) gross take-off weight and the 100 hp (75 kW) Rotax 912ULS engine. [14] The model is on the Federal Aviation Administration's list of approved United States Light Sport Aircraft. [23]

Derivative designs

Since early 2009, Belite Aircraft, a new company based in Wichita, Kansas has produced the Belite Aircraft Superlite derivative of the Kitfox Lite single-seat ultralight design. Belite extensively redesigned the aircraft to incorporate carbon fiber reinforced polymer wings, struts, spars and ribs, lowering the empty weight to 245 lb (111 kg). [24] [25] [26]

Belite Aircraft "has acquired the production rights to a previously designed aircraft, the Kitfox Lite" and has "acquired the tooling, existing parts and manufacturing rights to the aircraft in March of 2009. As a condition of the transaction, they agreed to rebrand the airplane to prevent any confusion with the larger, two-place light sport Kitfox". It has a metal airframe and is covered in poly-fiber fabric. [24] [26]

In Europe, the Apollo Fox and Aeropro Eurofox are based upon the Kitfox, with their Junkers flaps and folding wings. Both are Rotax-powered, side-by-side two-seaters, and are available either as taildraggers or with tricycle gear. [13] [27] The Light Aircraft Association's chief engineer, Francis Donaldson, tested a Eurofox and declared that "the manufacturer Aeropro has refined and greatly improved a kit plane classic". [3]

Specifications (Kitfox Classic IV)

Data from Kitfox Aircraft Website [28]

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Aero-Works Aerolite 103</span> American ultralight airplane

The Aero-Works Aerolite 103 is an American single seat, high-wing, pusher configuration ultralight aircraft, designed by Terry Raber and introduced by Aero-Works, Inc, of Millersburg, Ohio, in 1997. The aircraft's model number indicates that it was designed to comply with the Federal Aviation Administration FAR 103 ultralight rules.

<span class="mw-page-title-main">ISON Airbike</span> Type of aircraft

The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996.

<span class="mw-page-title-main">Spectrum Beaver</span> Canadian ultralight aircraft

The Spectrum Beaver is a family of single- and two-place, pusher configuration, high-wing ultralight aircraft that were designed by Larry Croome and first introduced by Spectrum Aircraft of Surrey, British Columbia, Canada, in 1983.

The Avid Champion is an American single-seat, high-wing ultralight aircraft that was produced starting in 1998 as a kit by Avid Aircraft of Caldwell, Idaho, later Ennis, Montana.

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

<span class="mw-page-title-main">Flightstar</span> Type of aircraft

The Flightstar is a large family of single and two-seat, high wing, single engined kit aircraft that was produced by Flightstar Sportplanes of South Woodstock, Connecticut. In 2009 the rights, tooling and parts inventory were sold to Yuneec International of China when Flightstar Sportplanes' business was wound up.

The Wings of Freedom Flitplane is an American single-seat, high-wing, single-engine ultralight aircraft that is available as a kit aircraft or as plans for amateur construction from Wings of Freedom of Hubbard, Ohio.

<span class="mw-page-title-main">Fisher Dakota Hawk</span> Canadian homebuilt light aircraft

The Fisher Dakota Hawk is a Canadian side-by-side two-seat, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders.

The Freebird I is an American single-seat, high wing, tricycle gear, single engined pusher configuration ultralight kit aircraft designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina and later also produced by Pro Sport Aviation of Wingate, North Carolina.

The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.

The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.

The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.

The Dart Skycycle is an American single-seat, high wing, strut-braced, single-engine, conventional landing gear ultralight aircraft that was designed by Robert Dart and produced by Dart Aircraft of Mayville, New York for amateur construction.

<span class="mw-page-title-main">Flying K Sky Raider</span> Family of ultralight aircraft

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Aeroprakt A-20 Vista</span> Type of aircraft

The Aeroprakt A-20 Vista is a family of Ukrainian tandem two-seat high-wing, strut-braced, pusher configuration conventional landing gear, ultralight aircraft, produced by Aeroprakt. The A-20 was introduced into the North American market at AirVenture 1999.

<span class="mw-page-title-main">Bailey-Moyes Dragonfly</span> Type of aircraft

The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.

<span class="mw-page-title-main">Avid Flyer</span> Type of aircraft

The Avid Flyer is a family of American single engine, high-wing, strut-braced, conventional landing gear-equipped, two seat ultralight aircraft designed for kit construction in the 1980s. Its several variants sold in large numbers. In 1987 a Flyer became the first ultralight to land at the North Pole.

<span class="mw-page-title-main">Belite Aircraft Superlite</span> Type of aircraft

The Belite Superlite, originally the product of Belite Aircraft, is a single-seat, high-wing, single-engine ultralight aircraft developed from the Kitfox Lite aircraft especially for the United States FAR 103 Ultralight Vehicles category.

<span class="mw-page-title-main">Belite Aircraft</span> American ultralight aircraft manufacturer

Belite Aircraft was an American aircraft manufacturer based in Wichita, Kansas and founded by James and Kathy Wiebe in 2009. The company specialized in the design and manufacture of ultralight aircraft in the form of kits for amateur construction and ready-to-fly complete aircraft under the US FAR 103 Ultralight Vehicles rules.

References

  1. 1 2 Kitfox Aircraft LLC (2006). "New to Kitfox". Archived from the original on 2008-07-04. Retrieved 2009-06-30.
  2. 1 2 3 4 5 Kitfox Aircraft LLC (2006). "Kitfox History". Archived from the original on 2008-05-13. Retrieved 2009-06-30.
  3. 1 2 "EuroFox" (PDF). eurofoxuk.co.uk. Archived from the original (PDF) on 20 June 2012. Retrieved 30 May 2016.
  4. "Kitfox Aircraft History". lazair.com. Retrieved 30 May 2016.
  5. 1 2 Bushplanes.com (n.d.). "Kitfox" . Retrieved 2009-07-04.
  6. Kitfox Aircraft LLC (2006). "Series 7". kitfoxaircraft.com. Archived from the original on 4 July 2008. Retrieved 28 February 2018.
  7. Kitfox Aircraft LLC (2006). "Model I". Archived from the original on 2008-07-04. Retrieved 2009-06-25.
  8. Kitfox Aircraft LLC (2006). "Model II". Archived from the original on 2008-07-04. Retrieved 2009-06-25.
  9. Kitfox Aircraft LLC (2006). "Model III". Archived from the original on 2008-07-06. Retrieved 2009-06-25.
  10. 1 2 3 4 5 Kitfox Aircraft LLC (2006). "Model IV". Archived from the original on 2008-07-06. Retrieved 2009-06-30.
  11. Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages B-34. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  12. Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages B-86. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  13. 1 2 3 Bayerl, Robby; Martin Berkemeier; et al: World Directory of Leisure Aviation 2011–12, pages 26, 62 and 106. WDLA UK, Lancaster UK, 2011. ISSN 1368-485X
  14. 1 2 Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015–16, pages 65 and 112. Flying Pages Europe SARL, 2015. ISSN   1368-485X
  15. 1 2 Kitfox Aircraft LLC (2006). "Series 5 (Safari, Vixen, Outback, Voyager)". Archived from the original on 2008-07-04. Retrieved 2009-06-30.
  16. Kitfox Aircraft LLC (2006). "Series 6". Archived from the original on 2008-07-04. Retrieved 2009-06-30.
  17. Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 58. Belvoir Publications. ISSN 0891-1851
  18. Kitfox Aircraft LLC (2006). "Series 7". Archived from the original on 2008-07-04. Retrieved 2009-06-30.
  19. Kitfox Aircraft LLC (2006). "Kitfox S7 Super Sport". Archived from the original on 16 August 2011. Retrieved 9 October 2011.
  20. "General F.A.Q." www.kitfoxaircraft.com. Retrieved 2020-04-03.
  21. "STi Package". www.kitfoxaircraft.com. Retrieved 2020-04-03.
  22. "S7 Speedster Package". www.kitfoxaircraft.com. Retrieved 2020-04-03.
  23. Federal Aviation Administration (26 September 2016). "SLSA Make/Model Directory" . Retrieved 2 March 2017.
  24. 1 2 Grady, Mary (July 2009). "Former Kitfox-Lite Model Re-launches As Belite Ultralight" . Retrieved 2009-07-02.
  25. Grady, Mary (July 2009). "First Flight For Belite Ultralight" . Retrieved 2009-07-16.
  26. 1 2 Belite Aircraft (June 2009). "Wichita Entrepreneurs Acquire Kitfox Lite Ultralight Aircraft Manufacturing Rights, Plan Reintroduction, Weight Savings and Improvements". Archived from the original on 3 September 2010. Retrieved 2009-07-15.
  27. Bertrand, Noel; Rene Coulon; et al: World Directory of Leisure Aviation 2003–04, page 118. Pagefast Ltd, Lancaster UK, 2003. ISSN 1368-485X
  28. Kitfox Aircraft LLC (2006). "Kitfox Classic IV Specifications and Performance". Archived from the original on 2010-10-10. Retrieved 2009-06-25.