ISON Airbike

Last updated
Airbike & Tandem Airbike
ISON Airbike Photo 1.jpg
An Airbike at Sun 'n Fun 2004
Role Ultralight aircraft
National origin United States
Manufacturer TEAM Aircraft
ISON Aircraft
Jordan Lake Aero
Designer Wayne Ison
First flight1994
Introduction1994
StatusIn production (2013)
Number built127 (December 1999) [1]

The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996. [1] [2]

Contents

Originally produced by TEAM Aircraft of Bradyville, Tennessee, manufacturing passed to ISON Aircraft, also of Bradyville, before the end of kit production. Starting circa 2009 kits became available, once again, this time from Jordan Lake Aero. [3]

Development

The single seat Airbike was designed to meet the requirements of the United States FAR 103 Ultralight Vehicles, including the maximum 254 lb (115 kg) empty weight. The tandem-seat model was intended to be licensed as an ultralight trainer or an amateur-built aircraft. [2]

The single-seater can achieve an empty weight as low as 251 lb (114 kg) with the use of a light-weight engine, such as the 28 hp (21 kW) Rotax 277 or the 22 hp (16 kW) Zenoah G-25. [2]

The name Airbike was chosen for the aircraft because it has a narrow fuselage and the pilot's feet rest on rudder pedals that are on the outside of the aircraft, in a similar manner to a motorcycle. [2]

The Tandem Airbike retains all of the single-seater's features and has a stretched fuselage to accommodate the second seat. It uses a wing of 33.8 ft (10.3 m) span with an area of 152 sq ft (14.14 sq m). [2]

Design

An Airbike at Sun 'n Fun 2004 showing the external rudder pedals ISON Airbike Photo 2.jpg
An Airbike at Sun 'n Fun 2004 showing the external rudder pedals

Both variants feature a parasol wing constructed from wood and covered with aircraft fabric. The wing has full-span ailerons or, in the case of the two-seater, optional electrically-actuated flaperons. All controls are cable-operated. The elevator and rudder are conventional. [2]

The fuselage is made from welded 4130 steel tube and the aircraft has conventional landing gear with tail wheel steering connected to the rudder pedals. The main landing gear utilises sprung-tubes for suspension and absorbing landing loads. [2]

The Airbike was sold as an assembly kit. The kit included a pre-welded fuselage and tail, pre-built main wing spars and ribs, all brackets and fittings, landing gear, engine, propeller, instruments and a five-gallon fuel tank. The company estimated the time to complete the aircraft at 150 hours for the single-seater. The price in 2001 for the single-seat Airbike was US$7195 [2]

The Tandem Airbike had a factory estimated construction time of 200–300 hours or 100–150 hours if the quick-built kit option was purchased. In 2001 the kits price was US$8000 without engine or propeller. [2]

Operational history

In December 1998 the company reported that 127 single-seaters were flying (the majority as US unregistered ultralights) and 23 tandem-seaters. In July 2009 there were 45 Airbikes registered as experimental amateur-builts or light sport aircraft in the USA. [1] [4]

Variants

Airbike
Single seat aircraft designed for the US ultralight category. Engine options were the 28 hp (21 kW) Rotax 277, 40 hp (30 kW) Rotax 447 or 22 hp (16 kW) Zenoah G-25. [1] [2]
Tandem Airbike
Two-seat aircraft designed as an ultralight trainer or amateur-built. Standard engine was the 50 hp (37 kW) Rotax 503. [1] [2]

Specifications (Airbike with Rotax 447)

Data from KitPlanes [1] & Cliche [2]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

<span class="mw-page-title-main">Quad City Challenger</span> American ultralight aircraft

The Quad City Challenger is a family of one and two seats-in-tandem, pusher configuration, tricycle landing gear ultralight aircraft that is designed and produced by Quad City Aircraft Corporation of Moline, Illinois. The Challenger was first introduced in 1983.

<span class="mw-page-title-main">Aero-Works Aerolite 103</span> American ultralight airplane

The Aero-Works Aerolite 103 is an American single seat, high-wing, pusher configuration ultralight aircraft, designed by Terry Raber and introduced by Aero-Works, Inc, of Millersburg, Ohio, in 1997. The aircraft's model number indicates that it was designed to comply with the Federal Aviation Administration FAR 103 ultralight rules.

The Avid Champion is an American single-seat, high-wing ultralight aircraft that was produced starting in 1998 as a kit by Avid Aircraft of Caldwell, Idaho, later Ennis, Montana.

The Airdrome Dream Classic is a minimalist, high wing, single seat, single engine ultralight aircraft inspired by the 1908 Santos-Dumont Demoiselle and produced in kit form by Airdrome Aeroplanes of Holden, Missouri.

<span class="mw-page-title-main">Lockwood Drifter</span> Type of aircraft

The Lockwood Drifter is a family of high wing, single engine, pusher configuration, open cockpit, one and two-seat kit aircraft that was first introduced in the 1980s by Maxair and remains in production today by Lockwood Aircraft of Sebring, Florida.

The Wings of Freedom Flitplane is an American single-seat, high-wing, single-engine ultralight aircraft that is available as a kit aircraft or as plans for amateur construction from Wings of Freedom of Hubbard, Ohio.

The Freebird I is an American single-seat, high wing, tricycle gear, single engined pusher configuration ultralight kit aircraft designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina and later also produced by Pro Sport Aviation of Wingate, North Carolina.

The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.

<span class="mw-page-title-main">CGS Hawk</span> Type of aircraft

The CGS Hawk is a family of high wing, strut-braced, pusher configuration, single and two-seats-in-tandem ultralight aircraft, designed by Chuck Slusarczyk and manufactured by CGS Aviation.

<span class="mw-page-title-main">Team Mini-Max Hi-MAX</span> American kit aircraft

The Team Mini-Max Hi-MAX is a single-seat, high wing, strut-braced, single engine aircraft available in kit form for amateur construction. It first flew in 1987 and is a high wing development of the Mini-MAX, hence its model name.

<span class="mw-page-title-main">Mini-MAX</span> American kit aircraft

The Team Mini-MAX is a large family of single-seat, mid-wing, strut-braced, single engine aircraft, available in kit form for amateur construction. The first Mini-MAX had its first flight in 1984. Its name indicates its original design goals: a minimum-cost aircraft that requires a minimum of building space, time and skill, but which provides a maximum of enjoyment and performance.

The Capella Javelin is a family of American open cockpit, high wing, tractor configuration, conventional landing gear-equipped ultralight aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.

<span class="mw-page-title-main">Kolb Firefly</span> American ultralight airplane

The Kolb Firefly is an American open cockpit, single seat, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction. The aircraft was designed in 1995.

<span class="mw-page-title-main">Kolb Firestar</span> Type of aircraft

The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.

The Kolb Kolbra and King Kolbra are a family of American tandem two seater, high wing, strut-braced, pusher configuration, conventional landing gear-equipped ultralight aircraft that are produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction.

<span class="mw-page-title-main">AmeriPlanes Mitchell Wing A-10</span> Type of aircraft

The Mitchell Wing A-10 and T-10 are a family of American cantilever, tricycle landing gear, high-wing, pusher configuration, one and two seat ultralight aircraft designed for amateur construction or supplied as completed aircraft. The aircraft were designed by Don Mitchell and were produced by a number of companies, the last being AmeriPlanes of Truro, Iowa.

<span class="mw-page-title-main">Rans S-12 Airaile</span> Type of aircraft

The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.

<span class="mw-page-title-main">Flying K Sky Raider</span> Family of ultralight aircraft

The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">Sport Flight Talon</span> Type of aircraft

The Sport Flight Talon is a high-wing, pusher configuration single-engine, conventional landing gear homebuilt aircraft or ultralight aircraft, that was produced by Sport Flight Aviation of Sandy, Oregon in kit form for amateur construction.

References

  1. 1 2 3 4 5 6 Kitplanes Staff: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 70. Primedia Publications. IPM 0462012
  2. 1 2 3 4 5 6 7 8 9 10 11 12 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages B-3 & B-68. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  3. ↑ Jordan Lake Aero (2009). "Airbike Models" . Retrieved 13 February 2013.
  4. ↑ Federal Aviation Administration (July 2009). "Make / Model Inquiry Results" . Retrieved 27 July 2009.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.