Catalina | |
---|---|
Avid Amphibian | |
Role | Homebuilt aircraft |
National origin | United States |
Manufacturer | Avid Aircraft |
Introduction | September 1994 (Catalina) |
Status | Production completed (2003) |
Number built | 100 (Amphibian and Catalina, 2001) |
The Avid Catalina is an American homebuilt amphibious aircraft that was designed and produced by Avid Aircraft of Caldwell, Idaho. [1] [2] [3] It is a development of the Avid Amphibian. [4]
When it was available the aircraft was supplied as a kit, for amateur construction. [1] [2]
The Catalina was introduced in September 1994. Avid Aircraft ceased operations in November 2003 and Catalina production ended. [5] [6]
The Catalina features a strut-braced high-wing, a three-seat enclosed cabin, retractable conventional landing gear, a boat hull and a single engine in pusher configuration. [1]
The aircraft is made from mixed construction, consisting of welded steel tubing, with its flying surfaces covered in doped aircraft fabric, plus fiberglass for the hull and other parts. Its 36.00 ft (11.0 m) span wing has a wing area of 150.00 sq ft (13.935 m2) and folds for storage or ground transport, without disconnecting the controls. The wing is supported by "V" lift struts with jury struts. [1] The Catalina wings had the option of mid-wing sponsons, or the original Amphibian droop wing tip sponsons for water operations. [7]
The original engine used was the 64 hp (48 kW) Rotax 582 twin cylinder two stroke powerplant. [1] Other known engines flown have included the Rotax 618, [5] Rotax 912, [8] Hirth F30, [9] Hirth 2706 [10] and Verner 133MK [11] engines.
The Catalina has an empty weight of 600 lb (270 kg) and a gross weight of 1,200 lb (540 kg), giving a useful load of 600 lb (270 kg). With full fuel of 17.5 U.S. gallons (66 L; 14.6 imp gal) the payload is 495 lb (225 kg). While the 17.5 U.S. gallons (66 L; 14.6 imp gal) fuel tank is standard equipment, the factory also offered optional 31.5 U.S. gallons (119 L; 26.2 imp gal) and 45.5 U.S. gallons (172 L; 37.9 imp gal) tanks. The earlier Amphibian model offered only 17.5 U.S. gallons (66 L; 14.6 imp gal) standard fuel, with a total of 28 U.S. gallons (110 L; 23 imp gal) as two 14 U.S. gallons (53 L; 12 imp gal) tanks optional. [1] [12]
The Avid Amphibian and Catalina could also be built without water operations capability. This variation of the aircraft was dubbed the "Landphibian", and was lighter without the inboard and outboard sponsons. In 1992 the Amphibian kit cost US$16,695, while the land-only version kit was US$15,695. [12]
The manufacturer estimated the construction time from the supplied kit as 700 hours. [1]
By 2001 the company reported that 100 examples of the Amphibian/Catalina were flying. [2]
In December 2013 eleven examples were registered in the United States with the Federal Aviation Administration. [13]
One builder, Rod Snider, of Boise, Idaho, wrote, "I completed the land version of the Avid Amphibian in January of 1987. Since then I have flown this remarkable little plane for 1960 hours. It is really a superb plane for sightseeing and flying slow and camping in back country airstrips. Three people of medium build can be carried comfortably, as can two people and all necessary camping gear with full fuel." [1] This aircraft was reported as destroyed in January 2004. [14]
Data from AeroCrafter [1]
General characteristics
Performance
The World Aircraft Vision, also called the Sentinel, is an American STOL amateur-built aircraft, produced by the World Aircraft Company. The aircraft was publicly introduced at Sun 'n Fun in 2012 and production is expected to commence in 2014. It is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.
The Sea and Sky Cygnet is an American amphibious ultralight trike that was designed by J.P. Krucker and initially produced by his company Krucker Manufacturing in Sudbury, Ontario, Canada and later by Sea and Sky of Fort Walton Beach, Florida, United States. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.
The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.
The AeroLites AeroMaster AG is an American homebuilt agricultural aircraft, designed and produced by AeroLites of Welsh, Louisiana. The aircraft is supplied as a kit for amateur construction.
The Associated Air Liberty 181 is an American homebuilt aircraft that was designed and produced by Associated Air of Woodland, Washington, introduced in the late 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
The Bounsall Super Prospector is an American STOL homebuilt aircraft that was designed and produced by Bounsall Aircraft of Mesquite, Nevada, introduced in 1990s. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The Freedom Lite SS-11 Skywatch is a Canadian ultralight aircraft that was produced by Freedom Lite of Walton, Ontario and later by Legend Lite of New Hamburg, Ontario, introduced in 1996. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft, or as a kit for amateur construction.
The Henderson Little Bear is an American homebuilt aircraft that was designed and produced by Henderson Aero Specialities of Felton, Delaware, introduced in 1993. The aircraft is a replica of the Piper J-3 Cub. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.
The Historical Ryan STA was an American homebuilt aircraft that was designed and produced by the Historical Aircraft Corporation of Nucla, Colorado. The aircraft was an 85% scale replica of the original Ryan STA and when it was available was supplied as a kit for amateur construction.
The Laron Wizard is an American homebuilt aircraft produced by Laron Aviation Tech of Borger, Texas. When it was available the aircraft was supplied as a kit for amateur construction.
The Microleve ML 450 is a Brazilian microlight aircraft that was designed and produced by Microleve of Rio de Janeiro. When it was available the aircraft was supplied as a complete ready-to-fly-aircraft or as a kit for amateur construction.
The Rans S-20 Raven is an American homebuilt aircraft that was designed by Randy Schlitter and is produced by Rans Designs of Hays, Kansas, introduced at AirVenture in August 2013. The aircraft is supplied as a kit for amateur construction and it is anticipated that it will later be offered as a complete ready-to-fly-aircraft in the light-sport aircraft category.
The Olympic Desert Eagle was an American homebuilt aircraft that was designed and produced by Olympic Ultralights of Port Angeles, Washington. When it was available the aircraft was supplied as a kit for amateur construction.
The Progressive Aerodyne Stingray is an American homebuilt flying boat that was designed by and produced by Progressive Aerodyne of Orlando, Florida, introduced in the 1990s. When it was available the aircraft was supplied as a kit for amateur construction.
The Mathews Mr Easy is an American homebuilt aircraft that was designed by Lyle Mathews and associates and produced by the Vintage Ultralight and Lightplane Association of Marietta, Georgia. It was the sixth and final design of Mathews. The aircraft is supplied in the form of plans for amateur construction.
The Parascender Para-Ag is an American powered parachute agricultural aircraft that was designed and produced by Parascender Technologies of Kissimmee, Florida. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Parascender II is an American powered parachute that was designed and produced by Parascender Technologies of Kissimmee, Florida. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Paratrek Angel 2-B is an American powered parachute that was designed and produced by Paratrek of Auburn, California. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Six Chuter Skye Ryder Aerochute is an American powered parachute that was designed and produced by Six Chuter of Yakima, Washington. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.
The Rans S-21 Outbound is an American STOL homebuilt aircraft that was designed by Randy Schlitter and is produced by Rans Designs of Hays, Kansas. It was introduced at AirVenture in 2016. The aircraft is supplied as a quick-build kit for amateur construction or ready-to-fly.
Wikimedia Commons has media related to Avid Catalina . |