Quicksilver GT500 | |
---|---|
GT500 | |
Role | Kit aircraft |
National origin | United States |
Manufacturer | Quicksilver Manufacturing |
Designer | David Cronk |
Introduction | 1990 |
Status | In production |
Produced | 1990-present |
Number built | 450 (GT500 2011) |
The Quicksilver GT500 is a family of American strut-braced, high-wing, pusher configuration, tricycle gear aircraft built by Quicksilver Aeronautics of Temecula, California. The aircraft is available as a kit for amateur construction or as a completed ready-to-fly aircraft. [1] [2]
The GT500 was developed specifically for the Sportplane class of the primary aircraft category (Part 21.24 of the Federal Aviation Regulations) and, on 26 July 1994, became the first aircraft certified in that category. Reviewer Noel Bertrand wrote, "[It] may sound like a very dry achievement, but actually speaks volumes for its design integrity. Not surprisingly its flight behaviour is excellent." [3] [4] [5] [6]
The aircraft's nomenclature is unclear as the manufacturer refers to it variously as the GT500, GT 500 and the GT-500. The FAA certification officially calls it the GT500. [3] [4] [7]
The GT500 is constructed from aluminium tubing, which is bolted together. The aircraft is covered in pre-sewn Dacron envelopes, with the forward fuselage made from fiberglass. The wing features half-span ailerons and half-span flaps. The GT500 has two seats in tandem, with dual controls featuring control columns with yokes. [3] [8] [1] A 1991 upgrade included optional doors that are zippered into place adding 10 kn (19 km/h) of cruise speed, steel landing gear legs with dual brakes and an electric starter. [9]
Data fromManufacturer [7] and Type Certificate [6]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Advanced Aviation Explorer is a two-seat ultralight marketed in kit form, for amateur construction. It is a high-wing taildragger aircraft of pusher configuration with tandem seating.
The Weedhopper is an American high-wing, tractor configuration, tricycle gear, two-axis control ultralight aircraft originally developed by John Chotia during the height of the 1970s ultralight boom and introduced in 1977. When it was in production the aircraft was sold as a kit for amateur construction and could be assembled in 25-30 man-hours.
The Fisher Dakota Hawk is a Canadian side-by-side two-seat, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders.
The Freebird II is a family of American side-by-side two-seat, high wing, tricycle gear, pusher configuration single engined kit aircraft originally designed for construction by amateur builders by the Freebird Airplane Company of Marshville, North Carolina, and later Pro Sport Aviation of Wingate, North Carolina.
The Sorrell Hiperlight is a family of single and two seat, negative stagger biplanes, designed for amateur construction.
The Kolb Firefly is an American open cockpit, single seat, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that is produced in kit form by New Kolb Aircraft of London, Kentucky and intended for amateur construction. The aircraft was designed in 1995.
The Loehle Sport Parasol is an American single-seat, parasol winged, single engine, ultralight aircraft produced in kit form by Loehle Aircraft for amateur construction. The aircraft meets the requirements of the US FAR 103 Ultralight Vehicles regulations.
The Rocky Mountain Wings Ridge Runner is a family of American high wing, strut-braced, single engine, conventional landing gear aircraft that were designed by Stace Schrader and were produced by Rocky Mountain Wings of Nampa, Idaho for amateur construction from 2000 to 2018.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Loehle SPAD XIII is an American single-seat ultralight aircraft scale replica of the First World War SPAD XIII fighter produced in kit form by Loehle Aircraft for amateur construction.
The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.
The Golden Circle Air T-Bird is a family of high-wing, strut-braced, pusher configuration ultralight aircraft that was produced by Teratorn Aircraft of Clear Lake, Iowa from 1983 to 1989 and then Golden Circle Air of De Soto, Iowa from 1989 until the mid-2000s. From 2011-2021 the aircraft were back in production by Indy Aircraft and from 2021 on by Tbird Aircraft. The aircraft is produced as a kit for amateur construction.
The Earthstar Thunder Gull is a family of cantilever high-wing, tricycle gear ultralight aircraft, manufactured by Earthstar Aircraft of Santa Margarita, California as a kit for amateur construction or as a completed aircraft.
The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The US Light Aircraft Hornet is an American two-seats-in-tandem, pusher configuration, tricycle gear, strut-braced high wing ultralight aircraft, that was produced US Light Aircraft Corporation of Ramona, California between 1994 and circa 2008 in kit form for amateur construction. It was also available as a factory-completed light-sport aircraft.
The SlipStream Genesis is a family of American, strut-braced, high wing, pusher configuration, tricycle gear aircraft, produced in kit form, for amateur construction. Designed by Chuck Hamilton, the series were originally produced by Innovation Engineering of Davenport, Iowa and more recently by SlipStream International of Wautoma, Wisconsin.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Raj Hamsa X-Air is an Indian, two-seat, high-wing, tricycle gear, tractor configuration, ultralight aircraft produced by Raj Hamsa Ultralights of Bangalore, Karnataka in kit form, for amateur construction.
The Rainbow Aerotrike is a family of South African two-seat ultralight trikes, made by Rainbow Aircraft of Edenvale, Gauteng and available in kit form for amateur construction or fully assembled. The type has been noted for its long-distance flights.
{{cite web}}
: CS1 maint: year (link){{cite web}}
: CS1 maint: year (link){{cite web}}
: CS1 maint: year (link)