MTT assay

Last updated
A microtiter plate after an MTT assay. Increasing amounts of cells resulted in increased purple colouring. MTT Plate.jpg
A microtiter plate after an MTT assay. Increasing amounts of cells resulted in increased purple colouring.

The MTT assay is a colorimetric assay for assessing cell metabolic activity. [1] [2] NAD(P)H-dependent cellular oxidoreductase enzymes may, under defined conditions, reflect the number of viable cells present. These enzymes are capable of reducing the tetrazolium dye MTT, which is chemically 3-(4,5-di methyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide, to its insoluble formazan, which has a purple color. Other closely related tetrazolium dyes including XTT, MTS and the WSTs, are used in conjunction with the intermediate electron acceptor, 1-methoxy phenazine methosulfate (PMS). With WST-1, which is cell-impermeable, reduction occurs outside the cell via plasma membrane electron transport. [3] However, this traditionally assumed explanation is currently contended as proof has also been found of MTT reduction to formazan in lipidic cellular structures without apparent involvement of oxidoreductases. [4]

Contents

Tetrazolium dye assays can also be used to measure cytotoxicity (loss of viable cells) or cytostatic activity (shift from proliferation to quiescence) of potential medicinal agents and toxic materials. MTT assays are usually done in the dark since the MTT reagent is sensitive to light.

MTT, a yellow tetrazole, is reduced to purple formazan in living cells. [5] A solubilization solution (usually either dimethyl sulfoxide, an acidified ethanol solution, or a solution of the detergent sodium dodecyl sulfate in diluted hydrochloric acid) is added to dissolve the insoluble purple formazan product into a colored solution. The absorbance of this colored solution can be quantified by measuring at a certain wavelength (usually between 500 and 600 nm) by a spectrophotometer. The degree of light absorption is dependent on the degree of formazan concentration accumulated inside the cell and on the cell surface. The greater the formazan concentration, the deeper the purple colour and thus the higher the absorbance.

XTT (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) has been proposed to replace MTT, yielding higher sensitivity and a higher dynamic range. The formed formazan dye is water-soluble, avoiding a final solubilization step. [6]

Water-soluble tetrazolium salts are more recent alternatives to MTT: they were developed by introducing positive or negative charges and hydroxy groups to the phenyl ring of the tetrazolium salt, or better with sulfonate groups added directly or indirectly to the phenyl ring.

MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium), in the presence of phenazine methosulfate (PMS), produces a formazan product that has an absorbance maximum at 490 nm in phosphate-buffered saline. The MTS assay is often described as a 'one-step' MTT assay, which offers the convenience of adding the reagent straight to the cell culture without the intermittent steps required in the MTT assay. However this convenience makes the MTS assay susceptible to colormetric interference as the intermittent steps in the MTT assay remove traces of coloured compounds, whilst these remain in the microtitre plate in the one-step MTS assay. Precautions are needed to ensure accuracy when using this assay and there are strong arguments for confirming MTS results using qualitative observations under a microscope. (This, however, is prudent for all colormetric assays.) [7]

WSTs (water-soluble tetrazolium salts) are a series of other water-soluble dyes for MTT assays, developed to give different absorption spectra of the formed formazans. [8] WST-1 and in particular WST-8 (2-(2-methoxy-4-nitrophenyl)-3-(4-nitrophenyl)-5-(2,4-disulfophenyl)-2H-tetrazolium), are advantageous over MTT in that they are reduced outside cells, combined with PMS electron mediator, and yield a water-soluble formazan. Finally, WST assays (1) can be read directly (unlike MTT that needs a solubilization step), (2) give a more effective signal than MTT, and (3) decrease toxicity to cells (unlike cell-permeable MTT, and its insoluble formazan that accumulate inside cells). [8]

Significance

Tetrazolium dye reduction is generally assumed to be dependent on NAD(P)H-dependent oxidoreductase enzymes largely in the cytosolic compartment of the cell. [3] [9] Therefore, reduction of MTT and other tetrazolium dyes depends on the cellular metabolic activity due to NAD(P)H flux. Cells with a low metabolism such as thymocytes and splenocytes reduce very little MTT. In contrast, rapidly dividing cells exhibit high rates of MTT reduction. It is important to keep in mind that assay conditions can alter metabolic activity and thus tetrazolium dye reduction without affecting cell viability. [10] In addition, the mechanism of reduction of tetrazolium dyes, i.e. intracellular (MTT, MTS) vs. extracellular (WST-1), will also determine the amount of product. Additionally, proof has been provided as to the spontaneous MTT reduction in lipidic cellular compartments/structures, without enzymatic catalysis involved. [4] Nevertheless, even under this alternative paradigm, MTT assay still assesses the reduction potential of a cell (i.e. availability of reducing compounds to drive cellular energetics). [2] As such, the final cell viability interpretation remains unchanged.

In studying the viability of cells seeded on 3D fibrous scaffolds, the thickness of the scaffolds may influence the MTT assay results. [11]

Methodology

1. Inoculate cells into 96-well plate at 2,500-5,000 cells/well in 100 µL volume. Incubate overnight at 37 °C with 5% CO2 to allow cell adhesion.

2. Add MTT [3-(4,5-dimethylthiazolyl-2)-2,5 diphenyltetrazolium bromide] solution (10 µL, 5 mg/mL) to each well and incubate for 3 h at 37 °C with 5% CO2.

3. Remove the culture medium and MTT formazan crystals from each well using 100 µL of acidified isopropanol (0.04 N HCl in 70% isopropanol). Gently shake the plate for 1 min and aspirate the contents completely using a multichannel pipettor.

4. Transfer the plate to a new 96-well plate containing 100 µL of 0.1 N NaOH per well and gently shake for 15 min on an orbital shaker platform set at low speed (<100 rpm).

5. Aspirate the contents of each well completely and transfer 50 µL of the solution from each well to a new 96 well plates.

6. Read the absorbance at 550 nm.

7. The amount of formazan produced is directly proportional to the number of living cells present in the culture and can be used to calculate cell viability. This assay has several advantages over other methods of measuring cell viability including its simplicity, speed, and sensitivity. Additionally, the MTT assay can be easily adapted for high-throughput screening applications. [12] [13] [14]

Observation

The Optical Density (OD) at 550 nm will be used to calculate the percentage of viability results using the following equation:

Viability % = 100 x OD550e/OD 550b

            Where, OD550e – Mean value of the measured optical density of the test item.

            OD550b – Mean value of the measured optical density of the negative control. [15]

See also

Related Research Articles

In vitro toxicity testing is the scientific analysis of the toxic effects of chemical substances on cultured bacteria or mammalian cells. In vitro testing methods are employed primarily to identify potentially hazardous chemicals and/or to confirm the lack of certain toxic properties in the early stages of the development of potentially useful new substances such as therapeutic drugs, agricultural chemicals and food additives.

Cytotoxicity is the quality of being toxic to cells. Examples of toxic agents are an immune cell or some types of venom, e.g. from the puff adder or brown recluse spider or spike proteins.

Plate readers, also known as microplate readers or microplate photometers, are instruments which are used to detect biological, chemical or physical events of samples in microtiter plates. They are widely used in research, drug discovery, bioassay validation, quality control and manufacturing processes in the pharmaceutical and biotechnological industry and academic organizations. Sample reactions can be assayed in 1-1536 well format microtiter plates. The most common microplate format used in academic research laboratories or clinical diagnostic laboratories is 96-well with a typical reaction volume between 100 and 200 µL per well. Higher density microplates are typically used for screening applications, when throughput and assay cost per sample become critical parameters, with a typical assay volume between 5 and 50 µL per well. Common detection modes for microplate assays are absorbance, fluorescence intensity, luminescence, time-resolved fluorescence, and fluorescence polarization.

<span class="mw-page-title-main">Sulforhodamine B</span> Chemical compound

Sulforhodamine B or Kiton Red 620 (C27H30N2O7S2) is a fluorescent dye with uses spanning from laser-induced fluorescence (LIF) to the quantification of cellular proteins of cultured cells. This red solid dye is very water-soluble.

A vital stain in a casual usage may mean a stain that can be applied on living cells without killing them. Vital stains have been useful for diagnostic and surgical techniques in a variety of medical specialties. In supravital staining, living cells have been removed from an organism, whereas intravital staining is done by injecting or otherwise introducing the stain into the body. The term vital stain is used by some authors to refer to an intravital stain, and by others interchangeably with a supravital stain, the core concept being that the cell being examined is still alive. In a more strict sense, the term vital staining has a meaning contrasting with supravital staining. While in supravital staining the living cells take up the stain, in "vital staining" – the most accepted but apparently paradoxical meaning of this term, the living cells exclude the stain i.e. stain negatively and only the dead cells stain positively and thus viability can be assessed by counting the percentage of total cells that stain negatively. Very bulky or highly charged stains that don't cross live plasma membrane are used as vital stains and supravital stains are those that are either small or are pumped actively into live cells. Since supravital and intravital nature of the staining depends on the dye, a combination of supravital and vital dyes can also be used in a sophisticated way to better classify cells into distinct subsets.

Seed testing is performed for a number of reasons, including research purposes or to determine if seed storage techniques are functioning. There are four tests most commonly done. The first two listed below are common for scientific research.

<span class="mw-page-title-main">Neutral red</span> Chemical compound

Neutral red is a eurhodin dye used for staining in histology. It stains lysosomes red. It is used as a general stain in histology, as a counterstain in combination with other dyes, and for many staining methods. Together with Janus Green B, it is used to stain embryonal tissues and supravital staining of blood. Can be used for staining Golgi apparatus in cells and Nissl granules in neurons.

<span class="mw-page-title-main">Antibody-dependent cellular cytotoxicity</span> Cell-mediated killing of other cells mediated by antibodies

Antibody-dependent cellular cytotoxicity (ADCC), also referred to as antibody-dependent cell-mediated cytotoxicity, is a mechanism of cell-mediated immune defense whereby an effector cell of the immune system kills a target cell, whose membrane-surface antigens have been bound by specific antibodies. It is one of the mechanisms through which antibodies, as part of the humoral immune response, can act to limit and contain infection.

<span class="mw-page-title-main">Tetrazolium chloride</span> Dye used in biochemistry and pathology

Triphenyl tetrazolium chloride, TTC, or simply tetrazolium chloride is a redox indicator commonly used in biochemical experiments especially to indicate cellular respiration. It is a white crystalline salt, soluble in water, ethanol and acetone but insoluble in ether.

The formazans are compounds of the general formula [R-N=N-C(R')=N-NH-R"], formally derivatives of formazan [H2NN=CHN=NH], unknown in free form.

A hydrotrope is a compound that solubilizes hydrophobic compounds in aqueous solutions by means other than micellar solubilization. Typically, hydrotropes consist of a hydrophilic part and a hydrophobic part, but the hydrophobic part is generally too small to cause spontaneous self-aggregation. Hydrotropes do not have a critical concentration above which self-aggregation spontaneously starts to occur. Instead, some hydrotropes aggregate in a step-wise self-aggregation process, gradually increasing aggregation size. However, many hydrotropes do not seem to self-aggregate at all, unless a solubilizate has been added. Examples of hydrotropes include urea, tosylate, cumenesulfonate and xylenesulfonate.

<span class="mw-page-title-main">Phloxine</span> Chemical compound

Phloxine B is a water-soluble red dye used for coloring drugs and cosmetics in the United States and coloring food in Japan. It is derived from fluorescein, but differs by the presence of four bromine atoms at positions 2, 4, 5 and 7 of the xanthene ring and four chlorine atoms in the carboxyphenyl ring. It has an absorption maximum around 540 nm and an emission maximum around 564 nm. Apart from industrial use, phloxine B has functions as an antimicrobial substance, viability dye and biological stain. For example, it is used in hematoxylin-phloxine-saffron (HPS) staining to color the cytoplasm and connective tissue in shades of red.

Michael Vivian Berridge is a New Zealand cell biologist. Since 1976, he has led the cancer cell and molecular biology research group at the Malaghan Institute of Medical Research. He is also a professor at Victoria University of Wellington and a Distinguished Research Fellow at the Malaghan Institute of Medical Research. He is best known for elucidating cellular mechanisms of reduction of tetrazolium dyes that are widely used in biology, and for the discovery of mitochondrial genome transfer from healthy cells to mitochondrial DNA-deficient cancer cells.

Carbon nanotubes (CNTs) are very prevalent in today's world of medical research and are being highly researched in the fields of efficient drug delivery and biosensing methods for disease treatment and health monitoring. Carbon nanotube technology has shown to have the potential to alter drug delivery and biosensing methods for the better, and thus, carbon nanotubes have recently garnered interest in the field of medicine.

<span class="mw-page-title-main">Resazurin</span> Chemical compound

Resazurin is a phenoxazine dye that is weakly fluorescent, nontoxic, cell-permeable, and redox‐sensitive. Resazurin has a blue to purple color and is used in microbiological, cellular, and enzymatic assays because it can be irreversibly reduced to the pink-colored and highly fluorescent resorufin (7-Hydroxy-3H-phenoxazin-3-one). At circum-neutral pH, resorufin can be detected by visual observation of its pink color or by fluorimetry, with an excitation maximum at 530-570 nm and an emission maximum at 580-590 nm.

<span class="mw-page-title-main">Viability assay</span> Assay created to determine survival of organs, cells, or tissues

A viability assay is an assay that is created to determine the ability of organs, cells or tissues to maintain or recover a state of survival. Viability can be distinguished from the all-or-nothing states of life and death by the use of a quantifiable index that ranges between the integers of 0 and 1 or, if more easily understood, the range of 0% and 100%. Viability can be observed through the physical properties of cells, tissues, and organs. Some of these include mechanical activity, motility, such as with spermatozoa and granulocytes, the contraction of muscle tissue or cells, mitotic activity in cellular functions, and more. Viability assays provide a more precise basis for measurement of an organism's level of vitality.

The phenotype microarray approach is a technology for high-throughput phenotyping of cells. A phenotype microarray system enables one to monitor simultaneously the phenotypic reaction of cells to environmental challenges or exogenous compounds in a high-throughput manner. The phenotypic reactions are recorded as either end-point measurements or respiration kinetics similar to growth curves.

A thermal shift assay (TSA) measures changes in the thermal denaturation temperature and hence stability of a protein under varying conditions such as variations in drug concentration, buffer pH or ionic strength, redox potential, or sequence mutation. The most common method for measuring protein thermal shifts is differential scanning fluorimetry (DSF) or thermofluor, which utilizes specialized fluorogenic dyes.

<span class="mw-page-title-main">INT (chemical)</span> Chemical compound

INT is a commonly used tetrazolium salt, similar to tetrazolium chloride that on reduction produces a red formazan dye that can be used for quantitative redox assays. It is also toxic to prokaryotes.

Selectivity factor is a quantifiable measure of how efficient an antibiotic is during the process of gene selection. It measures of the capacity an antibiotic to select for transfected (resistant) cells that contain a selectable marker, while killing untransfected (sensitive) cells that do not contain a selectable marker. A selectivity factor higher than 10 is optimal. This means the concentration of antibiotic is sufficient to kill untransfected cells but not toxic enough to kill transfected cells. A selectivity factor lower than 10 means the concentration of antibiotic needed for selection is too close to the toxic concentration for the transfected cells. As a result, fewer transfected cells survive and more untransfected cells survive. In this case an alternative antibiotic should be considered.

References

  1. ↑ Gavanji S, Bakhtari A, Famurewa AC, Othman EM (January 2023). "Cytotoxic Activity of Herbal Medicines as Assessed in Vitro: A Review". Chemistry & Biodiversity. 20 (2): 3–27. doi:10.1002/cbdv.202201098. PMID   36595710. S2CID   255473013.
  2. 1 2 Stockert JC, Horobin RW, Colombo LL, Blázquez-Castro A (April 2018). "Tetrazolium salts and formazan products in Cell Biology: Viability assessment, fluorescence imaging, and labeling perspectives" (PDF). Acta Histochemica. 120 (3): 159–167. doi:10.1016/j.acthis.2018.02.005. PMID   29496266. Archived (PDF) from the original on 2022-02-24. Retrieved 2020-04-15.
  3. 1 2 Berridge MV, Herst PM, Tan AS (2005). "Tetrazolium dyes as tools in cell biology: new insights into their cellular reduction". Biotechnology Annual Review. 11: 127–152. doi:10.1016/S1387-2656(05)11004-7. ISBN   9780444519528. PMID   16216776.
  4. 1 2 Stockert JC, Blázquez-Castro A, Cañete M, Horobin RW, Villanueva A (December 2012). "MTT assay for cell viability: Intracellular localization of the formazan product is in lipid droplets". Acta Histochemica. 114 (8): 785–796. doi:10.1016/j.acthis.2012.01.006. PMID   22341561.
  5. ↑ Mosmann T (December 1983). "Rapid colorimetric assay for cellular growth and survival: application to proliferation and cytotoxicity assays". Journal of Immunological Methods. 65 (1–2): 55–63. doi:10.1016/0022-1759(83)90303-4. PMID   6606682.
  6. ↑ "Why should I use XTT instead of MTT" (PDF, 0.1 MB). [aniara.com]. ANIARA. Archived (PDF) from the original on 2018-04-06. Retrieved 2010-11-19.
  7. ↑ Cory AH, Owen TC, Barltrop JA, Cory JG (July 1991). "Use of an aqueous soluble tetrazolium/formazan assay for cell growth assays in culture". Cancer Communications. 3 (7): 207–212. doi:10.3727/095535491820873191. PMID   1867954.
  8. 1 2 "Water Soluble Tetrazolium Salts (WSTs)" (PDF, 0.4 MB). [interchim.com]. Interchim. Archived (PDF) from the original on 2018-12-22. Retrieved 2013-08-12.
  9. ↑ Berridge MV, Tan AS (June 1993). "Characterization of the cellular reduction of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT): subcellular localization, substrate dependence, and involvement of mitochondrial electron transport in MTT reduction". Archives of Biochemistry and Biophysics. 303 (2): 474–482. doi:10.1006/abbi.1993.1311. PMID   8390225.
  10. ↑ Ghasemi M, Turnbull T, Sebastian S, Kempson I (November 2021). "The MTT Assay: Utility, Limitations, Pitfalls, and Interpretation in Bulk and Single-Cell Analysis". International Journal of Molecular Sciences. 22 (23): 12827. doi: 10.3390/ijms222312827 . PMC   8657538 . PMID   34884632.
  11. ↑ Lyundup AV, Demchenko AG, Tenchurin TH, Krasheninnikov ME, Klabukov ID, Shepelev AD (2016). "Improving the seeding effectiveness of stromal and epithelial cell cultures in biodegradable matrixes by dynamic cultivation". Genes to Cells. 11 (3): 102–107. doi:10.5281/zenodo.1175840. ISSN   2313-1829.
  12. ↑ Sharma, Dr Rudra (2022-10-05). "Cytotoxicity Test by MTT Assay- Procedure, Analysis and Results - ACME Research Solutions" . Retrieved 2022-10-06.
  13. ↑ Müller, G.; Kramer, A. (2006). "Comparative Study of in vitro Cytotoxicity of Povidone-Iodine in Solution, in Ointment or in a Liposomal Formulation (Repithel<sup>®</sup>) and Selected Antiseptics". Dermatology. 212 (Suppl. 1): 91–93. doi:10.1159/000090102. ISSN   1018-8665. PMID   16490982. S2CID   818013.
  14. ↑ Pintor, A. V. B.; Queiroz, L. D.; Barcelos, R.; Primo, L. S. G.; Maia, L. C.; Alves, G. G. (2020-07-27). "MTT versus other cell viability assays to evaluate the biocompatibility of root canal filling materials: a systematic review". International Endodontic Journal. 53 (10): 1348–1373. doi:10.1111/iej.13353. ISSN   0143-2885. PMID   32602945. S2CID   220271896.
  15. ↑ "ISO 10993-5:2009". ISO. Retrieved 2022-10-06.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.