Manta Foxbat

Last updated

Foxbat
Role Ultralight aircraft
National origin United States
Manufacturer Manta Products Inc
DesignerBill Armour
StatusProduction completed

The Manta Foxbat is an American ultralight aircraft that was designed by Bill Armour and produced by Manta Products Inc of Oakland, California. The aircraft was supplied as a kit for amateur construction. [1] [2]

Contents

Design and development

The Foxbat was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 200 lb (91 kg). It features a cable-braced high-wing, a single-seat, open cockpit, tricycle landing gear and a single engine in pusher configuration. [1] [2]

The aircraft is made from bolted-together aluminum tubing, with the wing covered in Dacron sailcloth. Its 32.5 ft (9.9 m) span wing is supported by cables strung from an inverted V style kingpost. The wing is derived from the Manta Fledge hang glider wing. The control system is unconventional and uses a hang glider style control bar for weight shift control of pitch and roll, augmented with wing tip rudders for yaw, activated by hand controls on the control bar. The fuselage is an open frame structure that is attached to the wing via a flexible single point mount, to allow weight shift control. The pilot is accommodated on a sling seat. The landing gear is of tricycle configuration, with a steerable nose wheel. [1] [2]

The Foxbat wing can be folded for ground transport and storage. [2]

Variants

Fledge III
Initial model, developed from the Manta Fledge hang glider [1]
FX-3
Model powered by Cuyuna 430 of 30 hp (22 kW) or a Zenoah G-25 of 20 hp (15 kW) [1]
Foxbat
Model powered by a Kawasaki 440 of 38 hp (28 kW) [1]

Specifications (FX-3)

Data from Cliche and the Virtual Ultralight Museum [1] [2]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

Pterodactyl Ascender

The Pterodactyl Ascender is a family of U.S. designed and built ultralight aircraft that were sold in kit form between 1979 and 1984 under Pterodactyl Limited and is currently being sold by DFE Ultralights.

The Airborne Avenger is an American ultralight aircraft that was designed and produced by Airborne Wing Design in the early 1980s. The aircraft was supplied as a kit for amateur construction.

The Robertson B1-RD is an American ultralight aircraft that was designed by Glen Bashforth and Bruce Bashforth and produced by the Robertson Aircraft Corporation. The aircraft was supplied as a kit for amateur construction with production starting in June 1982.

The International Ultralight Banchee is an American ultralight aircraft designed by Brian Jensen, Gil Kinzie and Nick Nichols and produced by International Ultralight Aviation. The aircraft was supplied as a kit for amateur construction.

The Hovey Delta Bird is an American ultralight aircraft that was designed by Bob Hovey in 1982 and supplied as plans for amateur construction.

The Goldwing Ltd Goldwing is an American ultralight aircraft that was designed by Craig Catto and Brian Glenn and produced by Goldwing Ltd. The aircraft was supplied as a complete factory-built aircraft only and no kits or plans were offered.

The Advanced Aviation Husky, Hi-Nuski and Coyote are a family of American ultralight aircraft that was designed and produced by Advanced Aviation. The aircraft was supplied as a kit for amateur construction and introduced in 1978.

The Striplin Lone Ranger is a family of American ultralight aircraft that was designed by Ken Striplin. The aircraft was supplied as a kit for amateur construction.

The Meadowlark Ultralight Meadowlark is an American ultralight aircraft that was designed by Jim Higgs and produced by the Meadowlark Ultralight Corporation. The Meadowlark was supplied only as a factory completed aircraft.

The Mitchell Wing P-38, also called the Lightning, is an American ultralight aircraft that was designed by Jim Mead and produced by Mitchell Aircraft Corporation. The aircraft was supplied as a kit for amateur construction.

The Waspair HM 81 Tomcat is a British canard ultralight aircraft of unusual design, that was produced by Waspair and later Midwest Microlites. The designer is disputed and Chip Erwin, Larry Whiting and Robin Haynes are all named as designers. The aircraft was supplied as a kit for amateur construction.

The Rotec Rally is a family of American ultralight aircraft that was designed by Bill Adaska in 1977 and produced by Rotec Engineering of Duncanville, Texas. Adaska had been an aeronautical engineer at Bell Helicopter and the French helicopter manufacturer, Aerospatiale, prior to starting Rotec. The aircraft was supplied as a kit for amateur construction.

The Star Flight Starfire is the first aircraft in a large family of American ultralight aircraft that was designed by Dick Turner and produced by Star Flight Manufacturing, introduced in 1979. The aircraft were all supplied as kits for amateur construction.

The Swallow Aeroplane Company Swallow is a series of American ultralight aircraft that was designed by Chet Fudge and produced by the Swallow Aeroplane Company in the 1980s. The aircraft was supplied as a kit for amateur construction.

The Pinaire Ultra-Aire is an American ultralight aircraft that was designed and produced by Pinaire Engineering. The aircraft was supplied as a kit for amateur construction.

The LEAF Trike is an American ultralight trike that was designed and produced by Leading Edge Air Foils in the 1980s. The aircraft was supplied as a kit for amateur construction.

The Fletcher Hercules is an American two-seat ultralight trike that was designed by AW Harrison and produced by Fletcher's Ultralights of Turlock, California, in the late 1990s and early 2000s. The aircraft was supplied as a kit for amateur construction and was also available as a completed aircraft.

The LiteWing Aircraft LiteTrike, also called The Lite Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied fully assembled.

The Spartan DFS Trike is an American ultralight aircraft designed and produced by Spartan Microlights. The aircraft was the first ultralight introduced that could be flown with a hang glider-style wing as an ultralight trike or with a powered parachute wing.

The Apollo Jet Star is a Hungarian ultralight trike, designed and produced by Apollo Ultralight Aircraft of Eger. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft.

References

  1. 1 2 3 4 5 6 7 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-22. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  2. 1 2 3 4 5 Virtual Ultralight Museum (n.d.). "Foxbat" . Retrieved November 22, 2011.