Marble Game Getter | |
---|---|
Type | Combination gun |
Place of origin | United States |
Production history | |
Designer | Webster L. Marble (1854—1930) |
Manufacturer | Marble's Arms & Manufacturing Company (formerly Marble Safety Axe Co.) [1] |
Produced | 1908—1962; 2009—present |
Specifications | |
Mass | 2¼lb [2] |
Barrel length | 12", 15", 18", 18½" variants |
Cartridge | .22 LR/.44 Shotshell, .22 LR/.410 bore, Other, less common, rifle calibers (see text) |
Action | Break-action |
Feed system | Tip-up barrels |
Sights | Fixed front-sight, folding, tang rear-sight |
The Marble Game Getter is a light, double-barrel (over-under), combination gun manufactured by the Marble's Arms & Manufacturing Company in Gladstone, Michigan. [3] The firearm features a skeleton folding stock and a rifled barrel over a smooth-bore shotgun barrel. A manually pivoted hammer striker is used to select the upper or lower barrel. Three generations of the system were/are produced—First Generation (Model 1908), Second Generation (Model 1921) and the Third Generation currently manufactured by Marble Arms.
The Model 1908 was generally produced in a .22 Short/.22 LR over .44 Shotshell configuration, though other rifle calibers were produced (e.g., .25-20, .32-20, .38-40). A barrel length of 15" was common, though some 18" and 12" models were produced. The Model 1908 was produced between 1908 and 1918. This model is stamped "-MANUFACTURED BY THE- MARBLE SAFETY AXE CO. -GLADSTONE, MICH. U.S.A.-" and "GAME GETTER" on the left side. The serial number is on the frame, below the barrels, and is accessed by pulling the trigger guard to the rear.
Two variations of the Model 1908 were made, the 1908A and 1908B. The former featured a flexible rear tang sight mounted behind the hammer and the latter had the sight hole plugged. [4]
Production of the Model 1921 started in 1921 and was essentially a new design. The grip, folding stock, safety, and several other features were redesigned. The Model 1921 was generally produced in either a .22 LR over .44 Shotshell or .22 LR over .410-bore shotgun configuration. The .410 model featured 2 or 2½" chambers, with the former being much more common. Barrel lengths of 12", 15" and 18" were produced. This model is stamped "MARBLE'S GAME GETTER GUN" and "MARBLE ARMS & MFG. CO. GLADSTONE, MICH. U.S.A" on the left side. The serial number is on the frame, below the barrels, and is accessed by pulling the trigger guard to the rear.
After the passage of the 1934 National Firearms Act, the 12 and 15" models were discontinued for domestic sales. The shorter barrel versions were offered in Canada until 1955. The last Model 1921 was produced from spare parts in 1962.
A third production model is currently produced by Marble Arms. It is similar in appearance to the Model 1908 and features a .22 LR rifle barrel over a .410-bore shotgun barrel. The only barrel length offered is 18½".
In Canada, the Game Getter is classified as "restricted" or prohibited depending on the calibre under current laws. [5]
In the United States, due to their being single-shot combination guns, Marble Game Getter models featuring shotgun barrel lengths of more than or equal to 12 inches (30 cm) and less than 18 inches (46 cm) require a $5 transfer tax stamp and registration as an Any Other Weapon to be in compliance with the National Firearms Act (NFA). [6] [7] Original Model 1908 and Model 1921 models produced before 1943 are Curios & Relics under US law, but are still subject to the provisions of the NFA if their barrels are less than 18 inches (46 cm) in length. [8] The 18-inch barrel variation was administratively removed from the NFA in 1939 by the Bureau of Internal Revenue after determining that it was not concealable on the person.[ citation needed ] The NFA doesn't apply to the version with 18-inch barrels and folding stocks, but removal of the stock makes the weapon less than 26 inches (66 cm), and thus qualify as a weapon made from a rifle/shotgun under the NFA. [9]
The National Firearms Act (NFA), 73rd Congress, Sess. 2, ch. 757, 48 Stat. 1236 was enacted on June 26, 1934, and currently codified and amended as I.R.C. ch. 53. The law is an Act of Congress in the United States that, in general, imposes an excise tax on the manufacture and transfer of certain firearms and mandates the registration of those firearms. The NFA is also referred to as Title II of the federal firearms laws, with the Gun Control Act of 1968 ("GCA") as Title I.
A sawed-off shotgun is a type of shotgun with a shorter gun barrel—typically under 18 inches (46 cm)—and often a pistol grip instead of a longer shoulder stock. Despite the colloquial term, barrels do not, strictly speaking, have to be shortened with a saw. Barrels can be manufactured at shorter lengths as an alternative to traditional, longer barrels. This makes them easier to transport and conceal due to their smaller profile and lighter weight. The design also makes the weapon more portable when maneuvering in confined spaces and for that reason law enforcement and military personnel find it useful in close-quarters combat scenarios. As a result of the shorter barrel length, any shotgun with a tubular magazine will have a reduction in its magazine capacity.
Savage Arms is an American gunmaker based in Westfield, Massachusetts, with operations in Canada and China. Savage makes a variety of rimfire and centerfire rifles, as well as Stevens single-shot rifles and shotguns. The company is best known for the Model 99 lever-action rifle, no longer in production, and the .300 Savage. Savage was a subsidiary of Vista Outdoor until 2019 when it was spun off.
A gunsmith is a person who repairs, modifies, designs, or builds guns. The occupation differs from an armorer, who usually replaces only worn parts in standard firearms. Gunsmiths do modifications and changes to a firearm that may require a very high level of craftsmanship, requiring the skills of a top-level machinist, a very skilled woodworker, and even an engineer. Gunsmiths perform factory-level repairs and renovations to restore well-used or deteriorated firearms to new condition. They may make alterations to adapt sporting guns to better fit the individual shooter that may require extensive modifications to the firearm's stocks and metal parts. Repairs and redesigns may require fabrication and fitting of unavailable parts and assemblies constructed by smiths themselves. Gunsmiths may also renew metal finishes or apply decorative carvings or engravings to guns. Many gun shops offer gunsmithing service on the premises.
The Mossberg 500 (M500) is a series of pump action shotguns manufactured by O.F. Mossberg & Sons. The 500 series comprises widely varying models of hammerless repeaters, all of which share the same basic receiver and action, but differ in bore size, barrel length, choke options, magazine capacity, stock and forearm materials. Model numbers included in the 500 series are the 500, 505, 510, 535, and 590. The Revelation 310 and the New Haven 600 were also variations of the 500 series produced by Mossberg under different names. By 2021, 11,000,000 M500s had been produced, making it the most-produced shotgun of all time.
The .410 bore (10.4 mm) is one of the smallest caliber of shotgun shell commonly available. A .410 bore shotgun loaded with shot shells is well suited for small game hunting and pest control. The .410 started off in the United Kingdom as a garden gun along with the .360 and the No. 3 bore (9 mm) rimfire, No. 2 bore (7 mm) rimfire, and No. 1 bore (6 mm) rimfire. .410 shells have similar base dimensions to the .45 Colt cartridge, allowing many single-shot firearms, as well as derringers and revolvers chambered in that caliber, to fire .410 shot shells without any modifications.
The Ruger 10/22 is a series of semi-automatic rifles produced by American firearm manufacturer Sturm, Ruger & Co., chambered for the .22 Long Rifle rimfire cartridge. It uses a patented 10-round rotary magazine, though higher capacity box magazines are also available. The standard carbine version of the Ruger 10/22 has been in production continuously since 1964, making it one of the most successful rimfire rifle designs in history, with numerous third party manufacturers making parts and accessories for upgrading and customization. The 10/22's aftermarket is so prolific that a complete 10/22 can be built without using any Ruger-made components.
Thompson/Center Arms was an American firearms company based in Springfield, Massachusetts. The company was best known for its line of interchangeable-barrel, single-shot pistols and rifles. Thompson/Center also manufactured muzzle-loading rifles and was credited with creating the resurgence of their use in the 1970s.
Harrington & Richardson Arms Company is an American brand of firearms and a subsidiary of JJE Capital Holdings. H&R ceased independent production February 27, 2015.
The ArmaLite AR-7 Explorer is a semi-automatic firearm in .22 Long Rifle caliber, developed in 1959 from the AR-5 that was adopted by the U.S. Air Force as a pilot and aircrew survival weapon. The AR-7 was adopted and modified by the Israeli Air Force as an aircrew survival weapon in the 1980s.
The MAG-7 is a pump-action shotgun manufactured by Techno Arms PTY of South Africa since 1995.
The Auto & Burglar Gun was a US-made factory-built handgun that was commercially manufactured by configuring a standard double-barrel shotgun with a pistol grip, at first engraving and later stamping "Auto & Burglar Gun" on each side of the frame, and shortening the barrels to about 10" to 12.2" in length. A holster with a flap and a snap was available for purchase from Ithaca. It was outsourced to a leather company and was embossed with "Auto & Burglar" on it. They are also very rare and are infrequently seen for sale in any condition.
Short-barreled rifle broadly refers to any rifle with an unusually short barrel. The term carbine describes a production rifle with a reduced barrel length for easier handling in confined spaces. Concern about concealment for illegal purposes has encouraged regulations specifying minimum barrel lengths and overall lengths.
Stevens Arms was an American firearms manufacturer founded by Joshua Stevens in 1864 in Chicopee, Massachusetts. The company introduced the .22 Long Rifle round and made a number of rifle, shotgun, and target pistol designs. By 1902, they were advertising themselves as "the largest producers of sporting arms in the world". They were purchased by New England Westinghouse on May 28, 1915, and again by Savage Arms on April 1, 1920. As a division of Savage, Stevens continued to produce firearms at their Chicopee Falls facility until 1960 when the plant was torn down and Stevens production was moved into other Savage facilities. Savage dropped the Stevens name in 1991, but revived it in 1999 and still uses it today for a number of its low cost rifles and shotguns.
An antique firearm is a term used to describe a firearm that was designed and manufactured prior to the beginning of the 20th century. Although the exact definition of what constitutes an "antique firearm" varies between countries, the advent of smokeless powder or the start of the Boer War are often used as cut-off dates. Antique firearms are usually collected because of their historical interest and/or their monetary value.
The M6 Aircrew Survival Weapon was a specially-made .22 Hornet over .410 bore combination gun issued to United States Air Force aircrews to help forage for food in the event of a plane crash. It was issued from 1952 until the early 1970s, in conjunction with the M4 Survival Rifle. Plans to replace both with the ArmaLite AR-5 never came to fruition and in 2018 was instead replaced with the GAU-5A Aircrew Self Defense Weapon in some instances.
The Mare's Leg is the name given to a customized shortened rifle used by Steve McQueen's character on the television series Wanted: Dead or Alive (1958–1961). McQueen's character was named Josh Randall. Mare's Leg is now a generic term for a Winchester Model 1892 with a shortened barrel and stock.
Title II weapons, or NFA firearms, are designations of certain weapons under the United States National Firearms Act (NFA).
The Smith & Wesson M&P15 is an AR-15 style semi-automatic rifle by Smith & Wesson. Introduced in 2006, the firearm is designed for police use and consumer markets.
The Colt Model 1839 Carbine is an early percussion revolving smoothbore carbine manufactured by the Patent Arms Manufacturing Company between 1838 and 1841. Produced alongside the Colt Second Model Ring Lever rifle, the Model 1839 was the most popular longarm of the Patent Arms period. The Model 1839 Carbine is differentiated from Colt's Ring Lever rifles by the lack of a cocking ring lever and the presence of an external hammer, which, when manually cocked, would rotate the six-shot cylinder to the next position. Approximately 950 Model 1839 Carbines were manufactured, and an additional shotgun variant, the Model 1839 Shotgun, was produced from 1839 to 1841 with approximately 225 manufactured. Though the United States Navy and Texas Navy purchased a number of Model 1839 Carbines, sales suffered due to the gun's high price and quality control issues.
Marble Game-Getter Gun[: ...] A firearm having combination rifle and shotgun barrels, more than 12 inches but less than 18 inches long, originally designed to be fired from the shoulder. Usually has a wire type folding stock attached. Removal of the stock from the weapon does not affect its classification as a firearm under the National Firearms Act.
The "any other weapon" definition also includes specifically described weapons with combination shotgun and rifle barrels 12 inches or more but less than 18 inches in length from which only a single discharge can be made from either barrel without manual reloading. The firearm most commonly associated with this portion of the definition is the Marble's Game Getter. NOTE: One version of the Marble's Game Getter was produced with 18-inch barrels and a folding shoulder stock. This model of the Game Getter, as manufactured, is not subject to the provisions of the NFA because it has barrels that are 18 inches in length and the overall length of the firearm, with stock extended, is more than 26 inches. However, if the shoulder stock has been removed from the 18-inch barrel version of the Game Getter, then the firearm has an overall length of less than 26 inches and is an NFA weapon. Specifically, the firearm is classified as a weapon made from a rifle/shotgun.